Bedrooms: 140 x 260 cm |Stand-up living room: 5.8s qm with built-in groundsheet
Easy to assemble/disassemble
Very quick to pitch: all-in-one inflatable structure and pre-mounted bedrooms.
Fresh fabric: reduces heat inside your tent in the sun.
Black fabric: guarantees 99% darkness in your rooms.
Tropical rain laboratory test | Under shower: 200 mm of water per hour per m²
Withstands force 7 winds - around 60 km/h | Wind tunnel test
Easy to transport
Rectangular cover | 75 x 39 x 39 cm | 114 litres | 17.52 kg
Living room of 5.8 sqm with a tent height of 1.95 m.
This tent has several pieces of equipment:
- a built-in groundsheet at the entrance in case of rain
- mosquito net windows with blackout cover
- storage pockets in the bedrooms and living room
Inflatable all-in-one structure with pre-assembled bedrooms and fly sheet.
Using our Quechua red 5.2-litre pump with built-in pressure gauge, we advise you to inflate the tubes to 7 psi pressure.
To view this pump, copy the reference 8243066 and paste it into the search engine of our website.
Our Fresh&Black technology relies on a UPF 50+ sun protection fabric.
Important: be careful, a large amount of UV rays can pass through an open door.
The ventilated flysheet on the living room lets you ventilate and limit condensation inside your tent. Outside each room is a high ventilation hatch. Inside each bedroom is a large, low ventilation hatch. The living room is equipped with a mosquito net and the bedrooms with high mosquito nets.
We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of our tent to the same wind intensity.
When the tent is properly pitched and the guy ropes are in place, it should remain habitable in a force 7 wind, measured at 60 km/h.
We test our tents to validate their waterproofing. The first test is done in the laboratory: 4 hours under 200 litres of water/hour/m², the equivalent of a tropical rain shower of 200 mm per hour. The second test is done by our teams in the field under real conditions. This tent is equipped with a polyurethane-coated polyester flysheet with 2000 mm water resistance. It also has seams taped using heat-sealed strips and a 190 g/m² polyethylene groundsheet.
Size and weight
Rectangular cover | 75 x 39 x 39 cm | 114 litres | 17.5 kg
As designers and users who love our playground, we care about the durability of our products. That's why all our tents are designed to be repairable. Spare parts and repairs of inflatable poles are available at the workshop of your Decathlon store or on our website at the following address: http://bit.ly/sav-tentes. Should you have a problem with this tent, check the after-sales file: http://bit.ly/tente-gonflable-4p-2ch
Inflatable poles - All our inflatable poles have a two-layer arch structure: an air chamber in thermoplastic polyurethane (TPU) and a 600 denier* polyester cover.
Living room reinforcement - There's an aluminum bar in the living room to stiffen the structure.
Tent pegs - All our pegs are made of steel and have a diameter of 6 mm.
*600 deniers indicates a weight of 600 g for a length of 9 m.
Each bedroom of this tent is designed to accommodate a maximum of two 70 cm-wide mattresses.