To inflate your SUP, check that the valve is in the raised position (closed), so that air does not escape.
Connect the pump.
Inflate to 17 psi.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
To deflate your SUP, push the valve in firmly, the air will escape.
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374
Remember to remove the fin once you get off the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Recommended user weight
For optimal use of the product, the maximum recommended weight with 2 people is 200 kg.
The maximum load of the tandem is 430 kg.
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Bought this after looking at family boards and realising that they where just too big and expensive. Used a handful of time on lakes in the Lake District. On the canals and on the sea. Very impressed with this board. Inflation when it’s 17 psi is a pain but got a new electric pump that goes to 20 psi now. Overall it’s a great buy especially if you have kids or a wife to bring along.