Reduces snow entry
This snowboarding jacket is designed to reduce snow entry:
_ on the back: snowskirt and long cut that allows you to sit on it,
_on the cuffs (very exposed area): long sleeves + cuffs to protect the wrist,
_the neck: collar with a high gusset and a hood with velcro to keep it rolled in high position, which protects the neck under the helmet.
4 pockets:
This snowboarding jacket is designed for occasional snowboarding, although it has 4 pockets:
_ 2 side pockets secured with a zipper fastening,
_ 1 secured inside pocket with a velcro fastening
_ 1 ski pass pocket on the left sleeve secured with a velcro fastening.
Hood rolls under the helmet
Snow can enter the jacket during a fall. To limit this unpleasant experience, the collar and hood were designed together.
The hood keeps the snow out. Fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet.
The collar should be closed up to the top, to tighten the jacket.
Hood fits above the helmet
The hood of the 100 Snowboard Jacket is not designed to be worn over the helmet.
This function is available on 500 Snowboard Jackets.
How does my product warranty work?
This product is guaranteed for 5 years from the date shown on the sales receipt. A product covered by the warranty will be repaired or exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear or improper use.
How can I be sure that my jacket is strong and durable?
We guarantee our products 5 years and will repair it with local professionals when damaged. Contact us on our website to find out more about what you need to do to have your product repaired.
We take particular care in choosing all the elements and assemblies that make up our products.
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we enhanced the jacket’s waterproofing with taped seams. These heat-bonded waterproof strips are placed on the seams inside the clothing to make it perfectly watertight. These waterproof seams are used in the areas the most exposed to the snow (hood, shoulders).
Why is my jacket water repellent?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 or 3 washes on average. All the waterproof jackets that we design for snowboarders are water repellent.
How does my jacket keep me warm?
To keep you warm, we use wadding insulation. Wadding is a synthetic component made from polyester that stores more or less air, depending on the length of the fibres. There are standard, technical and silicon coated waddings that have distinct properties (warmth, light weight, elasticity...). We use 100% recycled wadding to reduce the product’s environmental impact.
How do I look after my product?
To optimize your product’s performance and durability, we recommend: Machine wash separately at 30°C. Synthetic cycle. Turn the product inside out. Use a small amount of detergent. No fabric softener. We recommend wringing it by hand. Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator. You can restore the water resistance of the outer fabric using a fabric waterproofing spray.
