Wide opening to make it easier for rope and belay device to run through.

Easy opening/closing

Karabiner with auto-locking sleeve, open single handedly, and closes by itself.

Ease of use

Lightweight

Our climbing team designed this carabiner to connect a belay system to a harness for climbing and mountaineering.

Type of Snap Hook

Carabiner Shape

Anti-Cross-Loading

Gate Opening

Breaking strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

TECHNICAL FEATURES

The karabiner must be cleaned with fresh water and dried away from a heat source. Do not use any chemicals.
For further details, refer to the user guide.

CARE INSTRUCTIONS

Store the karabiner in a dry, cool, well ventilated place, away from UV rays and chemicals.
For further details, refer to the operating instructions.

STORAGE ADVICE

Carefully read the instructions before using.

DIRECTIONS FOR USE

Gear

Can hold a maximum of 900 kg without breaking.

Breaking resistance

Eco-design

Ideal for securing accessories when climbing or mountaineering.

A lightweight, low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Diameter

Rope Length (m)

Diameter:

Static strength:

Weight:

- Please note that this cord is static
- It should only be used as a backup for climbing, mountaineering, caving, or working at height.
- It will not absorb energy.
- It should not be used as a belay rope.

Restrictions of use:

Standards/certification

Bags & Ropes

Reduced volume for a minimal space requirement in the harness.

Compact design

Breaking strength of 2200 daN (kg) greater than that of a strap knot.

Durability

Available in 3 sizes easily identifiable by colour code-60/120/175cm

Flat strap rings, light and compact for minimal space requirement.Ideal for multiple uses in mountaineering, climbing and all vertical sports

Rope Length (cm)

Attaches to a plate, don't forget to close sleeve before anchoring

Our climbers have designed this quick link for use in climbing, big wall climbing use.

clearance

Water-repellent textile component withstands light rain.

Water repellent

Fabric that resists abrasion against the rock face.

Abrasion resistance

windproof membrane: airtight < 1 L/s∙m²

Windproof

Stretchy fabric and cut designed for greater ease of movement.

Freedom of movement

Stretchy bi-material hood that can be worn over a helmet.

Compatibility

Warmth

This softshell windproof stretch jacket is designed to protect you from unpredictable weather conditions when mountaineering.

Maximum washing temperature of 40°C. Very delicate cycle.

Maximum wash temperature of 30°C. Very delicate cycle.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Waterproof

Ventilation Zippers

Type of Layer

Pocket

Type of Length

sleeve length

Hood

Style

Main Material

two-way front zipper gives easy access to harness tie-in loop. Snap fastener added to jacket bottom to close it when zipper is pulled up.


Accessory feature

Clothing

Impact protection

Ventilation

ABS shell construction protects helmet from everyday scratches

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

Skill Level

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Certification

Detachable Visor

Fastener Type

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Keylock locking mechanism makes it easier to use

Our team of climbers designed this snap hook for hooking up a belay system to a harness or for climber safety during rope manoeuvres.

Breaking strength:
Major axis:  30 kN
Minor axis: 10 kN
Open gate: 10 kN

onlyonline

Seam resistance is greater than a webbing knot.

Available in 3 lengths (60 cm, 120 cm, and 175 cm) depending on your needs.

Exceptionally durable tubular sling for various uses in mountaineering, climbing, and other vertical sports.

Product certified in line with the EN566:2017 standard

Standards

Keylock® System. Bent and straight gate.

This carabiner was designed for making a quickdraw or attaching an accessory to your harness.

New patented system for gate opening / closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Strength:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

Technical features

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

Guidelines for use

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018

Wide opening and Spider system for greater ease of use.

Its orange colour makes it easy to identify on a harness.

Visual efficiency

Its round, pear-shaped body (HMS) and Spider fastening allow for use in all situations (relays, etc.) without snagging.

Total weight

Major axis, gate closed: 21 kN
Major axis, gate open: 6 kN
Minor axis: 9 kN

Standards/Certification

Red visual indicator is visible when carabiner is open.

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

Strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

Keylock shape and flat tint on the carabiner for easier handling.

This versatile quickdraw is designed for climbing and mountaineering.

Carabiner:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

Strap
Length: 11 cm (4 1/3")
Width: 16 mm (2/3") 

Quickdraws should be cleaned with fresh water and dried away from a source of heat. Do not use chemicals.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the quickdraw in a dry, cool and ventilated place, away from UV and chemicals.
For more details, refer to the instructions for use.

Storage and transport

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018
The straps are certified   EN 566: 2017

Wide opening makes it easier to run rope and belay devices through.

BLC system for attaching carabiner to harness tie-in loop in line of major axis.

This screwgate carabiner is designed for hooking a belay system up to a harness when climbing or mountaineering.

Strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

Highly resistant to repeated folding and high levels of friction.

Elastic cordelette to really bite into narrow ropes.

Extremely lightweight—30 g compared to mechanical systems.

Weight

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Maximum wash temperature 95°C. Normal cycle.

Iron at a maximum soleplate temperature of 150°C.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

Features teeth on the side for easy setup on the rope

For an 8.9 mm (1/3") by 11 mm (2/5") single rope or a 7.5 mm (1/4") by 9 mm (1/3") half rope.

Single belaying/abseiling system, intended for indoor climbing or rock climbing activities.

This belay has 2 V-shaped brake grooves to slow the climber's descent.

Braking principle

If the system is dirty, clean it with fresh water and dry it away from heat sources. Do not use chemical products.
For more details, refer to the instructions for use.

Store the system in a dry, cool, and ventilated place, away from UV rays and chemicals.
 For more details, refer to the instructions for use.

Product in line with the standard EN 15151 -2 2012 and UIAA 129

Excellent weight distribution thanks to wide, very dense EVA foam pads.

User comfort

4 buckles for a better fit and good centring of the tie-in loop.

Versatility

Size S to M: 420 g (15 oz.)
size L to XXL: 460 g (16 1/4 oz.)

Reinforced upper and lower tie-in loops: better wear resistance.

Robustness

Our instructors and climbers designed this harness to give you the highest level of comfort and versatility, wherever you climb.

Thigh Adjustment

Waist Belt Adjustment

Gear holder

Easy on/off

Fully adjustable.
 The advantage is that it adapts to fit all body shapes as well as clothes made for various activities (shorts, tights, pants, over pants, etc.).
Sizes:2 buckles
Leg loops: 2 buckles

Available in 2 sizes

Adjustment

Size S to M:
Waist size: 70 cm to 95 cm (27" to 37")
Thigh sizes: 48 cm to 58 cm (19" to 23")

size L to XXL:
Waist size: 84 cm to 117 cm (33" to 46")
Thigh sizes: 57 cm to 67 cm (22" to 26")

Sizing tips

We recommend washing your harness in warm, soapy, pH neutral water at 30°C maximum. Rinse thoroughly with tap water (do not use high water pressure).Dry your harness on a drying rack. Do not tumble dry.

Care instructions

CE-certified product according to EN 12 277+A1 2018

Shoes & Harnesses

Weighs 60 g. Can be folded 4 times to save space
Folded dimensions: 29x9.5x4.5cm

Easy transport

The foam provides thermal insulation.
R-Value 1.3.

Thermal insulation

This seat was designed to protect you from the ground during breaks while trekking or camping.

Weather Conditions

Frequency

The foam provides thermal insulation.
R-value 1.3.
The R-value expresses the thermal performance and resistance of the mattress. The higher the R-value, the better the mattress insulates you from cold ground.
An R-value of 5.9 means a minimum temperature of use of about -24°C. 0.7 corresponds to +11°C
The R-value is not a standard, and each manufacturer can use their own criteria. A standardization process is currently underway.

Thermal properties and warmth

Open dimensions: 39 x 29 x 2 cm.
Folded size: 29 x 9.5 x 4.5 cm

Dimensions:

Camping Mattresses

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Sports/

Outdoor/

Climbing/

Gear/

simond

Climbing and Mountaineering Screw Snap Hook