A pair in size 9.5/10.5 weighs just 1.4 kg.

Lightweight

Prevents the growth of wild vegetation

Cushioning

Designed for hunting and all outdoor activities.

Condition

Reinforced Rubber Boots

Frequency

Lining Material

Boots Type

Season

Weather Conditions

Boot Height

Place of Practice

Main Material

Fastener Type

The Glenarm 100 boots are the lightest in our range. They are barely 1.4kg in size 9/9.5. Whether you’re hunting or out for a stroll, this waterproof boot keeps moisture out, even in muddy, rainy conditions. Made with tear- and abrasion-resistant materials, it’s also Resistant to tears and abrasion.

Lightweight and rugged

To keep your boots in good condition, clean them after each use with water and/or pH-neutral soap (avoid using hard brushes or abrasive sponges). Wipe dry with a cloth or let dry in a well-ventilated place away from heat sources. Store the boots upright, preferably in a dry place with good ventilation. They are fully waterproof and safe to wear in water up to the top of the shaft.

A few care instructions for these PVC boots

3.5/4: 1.0 kg
5/6: 1.1 kg
7/7.5: 1.2 kg
8/9: 1.3 kg 
9.5/10.5: 1.4 kg
11.5/12: 1.5 kg
13/13.5: 1.6 kg

Calf circumference in 8/9: 41 41 cm

Weight (kg)

Size          Calf circumference
2.5/3                        34 cm
4/5                       35 cm
5.5./6.5                        36.5 cm
7/8                        38 cm
8.5/9.5                       39 cm
10/11                       41 cm
12/12.5                       42.5 cm

Calf size

Size                       Inner height (mm)	
12/12.5 	                                     365	
10/11	                                     360	
8.5/9.5	                                      355	
7/8	                                     335	
5.5/6.5	                                     325	
4/5	                                     315	
2.5/3	                                     305

Inner height (mm)	

Boots & Socks

Fitting comfort

Synthetic upper withstands saddle friction.

Durability

You can cut these boots using scissors if they are too high.

Anatomic design

Easy to clean in fresh water - perfect if it rains.

Ease of use

Waterproof

Our horseback riding designers developed these versatile synthetic boots for beginner riders! 

Wash with clean water using a slightly damp sponge. If your boots get damp inside, stuff them with newspaper to absorb the moisture.

Care advice

Perfect for getting into the sport. Ideal for beginner riders. Very easy care.

How to use

Riding Boots & Half-Chaps

Flexible, grooved sole for good water drainage.

Grip

Resistance to salt water

These waterproof boots will keep feet dry on board and on shore in wet weather.

Precipitation

Rain boots

Very light at just barely 620 g in size 11.5C/12.5C.

Lining-free technology: inside and out washing, quick drying.

Easy to care for

Easy-to-put-on mid-calf design with pull loops and grooves.

Designed for outdoor expeditions in wet weather.

Skill Level

Jacket Type

Foot Width

These boots are waterproof, very light and soft. dirt is easy to clean off.

Boots for young explorers

The PVC boots we offer on this page can be washed very easily (inside and out) with water and a soapy solution. They also dry quickly. Thanks to the mid-high shaft, boot puller, and slide-in grooves, this design allows kids to put on/take off shoes in seconds. The slip-resistant rubber lug sole reduces the risk of slipping on wet and muddy surfaces.

The main features of these ankle boots

For your child, we advise choosing his or her usual size. Indeed, there is no fabric inside the boot and therefore no additional thickness. A specific sole is available to for this model (see Sole 100). In these conditions, children can step in puddles of water or walk in the rain and still keep feet dry. For extra comfort, they can wear thick high socks!

Further details

25/26: 450 g
10C/10.5C: 510 g
11.5C/12.5C: 620 g
13C/1: 770 g
2/2.5: 790 g

The boot reaches mid-calf. For example, on a size 1/2, the height is 22 cm.

Size inner height (mm)	
25/26	155	
27/28	165	
29/30	195	
31/32	205	
33/34	215

Size exterior height (mm)	
25/26	        175	
27/28	        185
29/30		215	
31/32		225	
33/34	        235

Exterior height (mm)

Size        Calf circumference (cm)
25/26		25.5
27/28		27
29/30		28
31/32		30
33/34		31 

Calf circumference (cm)

Removable insole for better insulation and cushioning.

These comfy boots were designed for occasional inshore sailing.

Removable Sole

Sock Height

Designed with a neck (top of boot) so kids can easily slip in and out of them.

Size in 9C/10C: 20 cm. 20 cm

Features

The environmental impact of the product is calculated over its entire life cycle with different indicators. A score (ABCDE) easily identifies the products with the best environmental performance by comparing products of the same type.  Decathlon applies this scheme voluntarily. Learn more at sustainability.decathlon.ca

A score to compare products’ environmental impact

Features a cushioned, shock-absorbent heel.

Sole with 5 mm lugs: better grip and propulsion on muddy ground.

Reinforced back provides strong ankle support.

Stability

Kick-off ridge makes them easy to remove.

Designed for all types of hunting in woodlands.

These rain boots have a puncture- and scuff-resistant multilayer rubber upper, a reinforced instep, and a rubber outsole. Walking in the forest, in open ground, undergrowth, or on difficult terrain is not a problem; even in aggressive dense vegetation composed of brambles, gorse, and thorny plants. These waterproof boots allow hunting in all environments.

Durable boots designed to stand the test of time

These boots feature a built-in shock-absorbent cushion system in the heel. How? Through the cushion built into the heel. It helps protect the foot by absorbing and distributing impacts, giving you a light, dynamic step and allowing you to walk comfortably for longer distances.

Cushioned heel: Innovative shock absorption

These boots mould to the shape of your foot, ensuring great stability. They’re as comfortable as a pair of slippers, but also provide firm ankle support. In addition, the insole is antibacterial and absorbent. This ergonomic model also features 5 mm lugs for optimal grip and mud removal while walking.

A comfortable, supple, and comfortable shoe that is pleasant to wear, keeping ankles in place. Excellent, right?

Try our boots! To keep your boots in good condition, clean after each use with pH-neutral soap and/or water (avoid hard brushes or abrasive sponges). Wipe dry with a cloth or let dry in a well-ventilated place away from heat sources. Store upright. Do not to fold, as the rubber may wear or crack at the creases.

Maintenance advice

To protect your boots year-round, we recommend using a silicone-based spray on the upper a few times a year (restorer spray available on our website). The silicone creates a protective layer, extending the boots’ lifespan. Store them upright, ideally in a dry, well-ventilated place.

How to protect your boots

39 : 40.5 height (tot. : 40.5 cm; int. : 37 cm)
40: 1.78kg; height (tot. : 41 cm; int. : 37.5 
cm)41: kg, height (tot. 41.5 cm, int. : 38cm) 
42: 1.96kg; height (tot. 42 cm, int. : 38.5 cm)
43: kg, height (tot. 42.5 cm, int. : 39 cm)
44: 2.12 kg, height (tot. : 43 cm; int. : 39.5 cm)
45: 2.24 kg, height (tot. 43.5 cm, int. : 40 cm)
46: 2.34 kg, height (tot. 44 cm, int. : 40.5 cm)
47: kg, height (tot. 44.5 cm, int. : 41cm)

Calf circumference on size 10.5: 41 cm

Additional information by size: weight per pair, total height, height without heel.

2,000 mm-rated waterproof coating | Main seams taped | Hood

Closed pocket with zipper | The jacket folds away into its right pocket

Easy transport

Hydrophilic coating (RET = 12): reduces condensation under the rain jacket.

Breathability

Hood adjustment | Zipper pull makes it easy to open with gloves

Light and compact rain jacket | Weight: 175 g in size L.

Designed for occasional hikes in rainy weather. A back-up solution in case of rain.

Duration

Pack

Number of Pockets

Wind

Hood

Zipper Type

Schmerber

Tightening Type

We take care of our planet to preserve nature and keep hiking enjoyable. 
Textile dyeing requires a lot of water but also produces wastewater from the dye baths. We use a bulk dyeing process that involves adding colour pigments when the thread is produced to reduce the environmental impact. This is called dope dyeing.

What we’ve done to reduce our environmental impact

This product has been validated in a shower test under 60 L of water/m²/hour for 1 hour. This test reproduces the average conditions of a rain shower. The fabric of this jacket is water repellent, which means water rolls off the fabric without being absorbed. Water repellency means the fabric doesn’t soak up water and the jacket stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Waterproofed main seams.

Garment waterproofing 

In order to maintain good waterproofing over time, the fabric’s water repellency must be regularly reactivated. We recommend doing this every three washes or after a dozen uses in the rain. The waterproof property is easily reactivated by warming the fabric using your clothes dryer or a hair dryer for a relatively short period. If you wash the garment, it must be thoroughly rinsed.You will find all our advice in the care instructions.

How to maintain your jacket’s waterproofing over time

We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Waterproof material with a rating of 2,000 mm withstands the pressure exerted by a 2,000 mm column of water, roughly equivalent to a two-hour shower.

Waterproof rating expressed in mm or Schmerber

To determine a fabric’s breathability, we measure its thermal evaporative resistance coefficient (RET) based on the ISO 11092 standard. The lower the fabric’s resistance, the more perspiration can escape and the more breathable the fabric is. 
- RET < 9 = extremely breathable fabric 
9 < RET < 12 = very breathable fabric 
12 < RET < 20 = breathable fabric 
RET > 20 = little or no breathability

Component breathability

When exercising, how much we perspire depends on the intensity and duration of the effort. If the fabric is not adequately breathable for the type of activity you are doing, vapour from perspiration condenses inside the jacket. This makes you feel damp: this is not rain coming through, but condensed perspiration. So, you need to choose a rain jacket based on your physical activity. This jacket is designed for a two-hour hike at a pace of 5 km/hour.

Choosing your waterproof jacket based on your outings and level of exertion

To better protect your lower body from wind and downpours, we recommend the Raincut overpants. In 2019, we started using a more eco-friendly dyeing process on these overpants.

Recommended products

Our hiking jackets are guaranteed for 2 years. Our commitment To offer you long-lasting products that you can use on all your hikes. Because the products we love the most are the ones that have been on many adventures, with many more to come!

Warranty

Jackets & Sweaters

clearance

Very light at just barely 1.21 kg in size 8/9.

Traction

Designed for all types of outdoor activities in wet weather.

These ankle boots are waterproof and very light. comfortable when walking, and dirt is easy to clean off.

Boots for women in nature

The PVC boots we offer here can be washed easily (inside and out) with water and a soapy solution. They also dry quickly. The mid-calf design, pull loops, and slide-in grooves allow you to pull these boots on and off easily. The slip-resistant rubber lug sole reduces the risk of slipping on wet and muddy surfaces.

We recommend that you choose your usual size. Indeed, no fabric inside the boot and therefore no additional thickness. A specific sole is available for this model (see Sole 100), which provides even more comfort, especially in winter. In these conditions, you can step into water puddles or walk in the rain and still feet dry.

3.5/4: 980 g
5/6: 1.04 kg
8/9: 1.21 kg
9.5/8: 1.32 kg

Size             Inner height (mm)	

35/36	                   230	
37/38	                  240
39/40	                  250
41/42	                  260

Size  Exterior height (mm) 

35/36		250	
37/38		260	
39/40		270	
41/42	        280

Size        Calf circumference (cm) 

35/36	              36
37/38	              37
39/40	         	39
41/42		        40

Supple material for good flex.Removable sole.

Fully injected sole and upper to avoid any risk of them coming apart.

Shaft high enough to provide good ankle support.

The elasticated gusset and tongue guide the foot into the boot.

Easy dressing

Easily cleaned with water. The sole can be removed to speed up drying.

The sole offers a good grip on the stirrup iron. Heel stops foot getting stuck.

Our equestrian designers created these jodhpur boots for occasional riders. They're easy to put on and can be worn in all weather.

These jodhpur boots go perfectly with the Mesh Half-Chaps 100.

Style:

Ideal for wet and muddy ground, they're waterproof and easily washable.

Conditions for use: 

Remove any sand or dirt using a soft brush, then clean with a damp cloth. No product necessary: plain water gets the job done!
If drying in a damp area, simply remove the insole to dry it and, if needed, insert newspaper in the jodhpur boots to absorb moisture.
Do not dry near a heat source (heater, fire).

Care advice: 

Comfort temperature when stationary: -9°C.
When active: -18°C.

Warmth

100% waterproof monoblock clog (the upper has no waterproof membrane).

Tread with Snow Contact technology: sole materials and tread pattern for snow.

The position and depth of the 5-mm studs provide traction on snow.

Wide boot opening makes them easy to put on and guarantees support.

Would you like to explore snow-covered trails? These boots are ideal for occasional hikes in shallow or packed snow.

Outsole Technology

comfort temperature

A warm, insulated lining effectively protects you from the cold.

Lab- and field-tested with hikers. We verified the comfort temperature both at rest and when walking, as this can vary significantly: -9°C when static and -18°C when moving. We also considered how men and women feel the chill differently.

Are my boots warm enough for my winter hikes?

A 100% waterproof mid-height inner shoe protects the part of the foot most in contact with the snow. The textile upper is water-repellent and warm for good protection against cold and snow.

How do my boots protect me from outdoor conditions?

A boot’s traction depends on the number and shape of the studs. The grip depends on the sole materials and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

What is the difference between traction and grip?

Boots with Snow Contact soles provide maximum grip and traction on snow for hiking. The strategic arrangement and height of the lugs (5 mm) ensure optimal grip when hiking on snow. The lugs are designed to grip hard snow and evacuate excess water to avoid slipping.

Which type of grip and traction does this boot provide?

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding anti-slip grips to your boots is the only way to ensure optimum safety.

What are the advantages of Snow Contact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, UV resistance, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

Follow these guidelines for winter activities: Warmth: Wear warm socks (ideally with a good percentage of wool).
Breathability: Choose socks based on the intensity of the hike and make sure they’re breathable, to minimize moisture.
Boot height: The height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

The right footwear for hiking in snow

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of my boots

This product is guaranteed for two years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear or improper use.

How does my product warranty work?

An ABCDE rating shows the environmental impact of a product. Put forward by ADEME, it takes into account production, transportation, usage, and waste generated at the end of a product’s life. Decathlon displays this information voluntarily to help you identify products with lower environmental impact. Learn more at sustainability.decathlon.com

Our products’ environmental impact

Winter Boots

Very light at just barely 1.46 kg in size 43/44.

Lining-free technology: wash inside and out, quick drying.

Practical and versatile

The PVC boots we offer on this page can be washed very easily (inside and out) with water and a soapy solution. They also dry quickly. The mid-calf design, pull loops, and slide-in grooves allow you to pull these boots on and off easily. The slip-resistant rubber lug sole reduces the risk of slipping on wet and muddy surfaces.

We recommend that you choose your usual size. Indeed, there is no fabric inside the boot and therefore no additional thickness. A specific sole is available to promise for this model (see Sole 100), which provides even more comfort, especially in winter. In these conditions, you can step in puddles or walk in the rain while keeping your feet dry.

41/42: 1.32 kg
9.5/10.5: 1.46 kg
11.5/12: 1.68 kg

Size                       Inner height (mm)	
41/42	                260	
43/44	                270
45/46	                280

Size                       Inner height (mm)	

41/42	                    280	
43/44		            290	
45/46		            300

Size             Calf circumference (cm)

41/42		        40
43/44		       41.5
45/46		        43 

Sports/

Outdoor/

Hunting/

Boots & Socks/

solognac

100 Lightweight PVC Boots – Men