Name: Leather Boat Shoes – Men’s
Brand: TRIBORD
SKU: 1471158
Price: 75 CAD
Availability: InStock

Stretch

Abrasion resistance

Pockets

Bermuda shorts for inshore sailing in warm weather.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Ironing at a maximum iron soleplate temperature of 200°C.

Stitching Type

Frequency

Pocket

Number of Pockets

Weather Conditions

Type of Bell

Style

Place of Practice

Main Material

Clothing

Tested in 2 hours of moderate rain
16,000 mm Schmerber
Non-waterproof pockets

Waterproof

Breathability

Adjustable ankle cuffs can fit right over your boots.

Easy dressing

The flat elastic waistband ensures a secure, comfortable fit.

Anatomic design

The pants easily pack down into a pocket.

Compact design

These waterproof pants were developed for inshore sailing in stormy weather.

Maximum wash temperature 70°C. Normal cycle.

reinforced area

belt height

Precipitation

modular

Windproof

Type of Length

Water-Repellent

Schmerber

We measure the water resistance of a fabric in mm (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Resistant to water pressure of 2,000 mm before and after ageing (5 washes). That’s equal to 15,000 Schmerber (the average pressure exerted during rainfall).
These pants were tested in 2 hours of moderate rain (60 L/m²/h).

Waterproof properties

Rinse with clean water after use.
Store in a dry place.
Wash as infrequently as possible to protect the water-repellent treatment.
Wash inside out, pocket zipped, on the synthetics cycle (30°C–40°C) with regular detergent. Do not use fabric softener. Do not overload your machine. Run extra rinse.
Line dry.
To restore its water repellency, tumble dry inside out on the synthetics cycle for 10–15 min.

Care instructions

Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the resistance, the more a fabric allows the body’s perspiration escape.
- RET < 9 = extremely breathable
- RET 9–12 = very breathable
- RET 12–20 = breathable
- RET > 20 = not very or not at all breathable

Waterproof even in the heaviest rainstorms (20,000 mm Schmerber).

Very breathable 2-layer fabric (RET < 12).

Specially treated so water slides off the surface.

Water repellent

6 zip pockets, including 1 inner pocket and 2 hand pockets.

Resistance to salt water

An all-around jacket for sailing in any weather.

Ventilation Zippers

Collar Type

Season

sleeve length

Membrane Construction

RECCO system

type of waterproofing

type of hood

Hood

We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component is water-resistant to 20,000 mm after aging (5 washes). This is equal to 20,000 Schmerber (the average pressure exerted during rainfall).
This jacket was tested in 3 hours of heavy rain (100 L/m²/h).

Waterproofing 1/2

High fleece-lined collar.
Plastic moulded zippers to prevent salt oxidation.
Water-repellent materials (water runs off).
Fully taped seams. 
The front zipper is protected by a storm flap and drainage channel for optimal waterproofing

Waterproofing 2/2

The hood is attached and doesn’t stow into the collar.
Its weight stops it from flapping in the wind.Height- and depth-adjustable.
The hood visor and headband provide good coverage and a better hold.
The high collar protects your lower face.

Features 2 zip hand pockets behind the cargo pockets.
2 cargo pockets for carrying your VHF radio, sail ties, and cap. The right pocket has a small inner pouch to hold knives or shackle keys.
1 outer zip pocket
1 inner zip pocket

Please note: Pockets are not watertight.

Full-length zipper with an inner storm flap that protects against wind and water.
Features a two-way front zipper. Both sides must be aligned for the zipper to slide.
A soft flap on the top of the collar shields your chin.

Front zip closure

Each sleeve has two adjustable wrist cuffs to prevent water from seeping in.
Both are fastened with rip-tabs. The first cuff is made of a smooth, flexible material so it’s comfortable against your skin.
The second can be secured over your gloves.
Unfasten the rip-tabs to remove the jacket.

Sleeves

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for perspiration to pass through the fabric.
For example:
RET < 9 = very breathable
RET 9–12 = breathable
This jacket has an RET below 12.

Water slides off the jacket’s surface without seeping in.
Jacket stays lightweight and breathable because there is no waterlog. The water-repellent coating applied to the jacket’s exterior may change over time.
To restore it, place the jacket in the dryer for 10 minutes at the lowest temperature.

Water repellency

To maintain the water-repellent properties, infrequent washing is recommended.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Wash it on the synthetics cycle at 30°C or 40°C with your usual detergent. Don’t use fabric conditioner or bleach, as these could damage the water-repellent coating.

Very important: choose a full-rinse cycle or extra rinse.

How to wash your jacket

Drying is a crucial phase in restoring the water-repellent treatment.
We recommend laying your garment flat on a clothes rack to dry. Warning: Never dry your jacket directly on a radiator.

Next, put your garment in the dryer and run a short synthetics cycle (10–15 min.) before turning it right-side-out. Warning: Do not over-dry.

How to restore water repellency

onlyonline

High collar and fitted cuffs and waist to block cold air.

Warmth

Durability

Softness

Weighs 400 g in size L. Fabric density: 270 g/m².  

Weight

Eco-friendly dye method to reduce our environmental impact.

Eco-design

This elegant, sailing pullover is ideal for cooler temperatures (7°C–10°C).

Skill Level

Type of Layer

Zipper Type

Grammage

To Bring Warmth

Inspired by classic sailing apparel, this sleek pullover features subtle ribbing and reinforced shoulders.
It’s made in a sweater-like knit with a fleece underside, making it incredibly warm and comfortable.
Thanks to its timeless look, you can wear it on or off the water.

Knit-style exterior and fleece interior

The collar buttons up all the way for maximum protection from the cold.
The shoulders are reinforced with a soft matte fabric to prevent chafing from overall straps.  

Buttoned collar

This pullover is designed to provide maximum freedom of movement.
We reworked the previous model to create a larger, slightly looser-fitting silhouette with wider sleeves. You can therefore choose your usual size.

Choosing a size

This pullover goes perfectly with Tribord cotton pants and can be worn over a traditional sailing top. Complete the look
with a pair of boat shoes!

Style tips

Tested in 2 hours of moderate rain
15,000 mm Schmerber

Very breathable coated fabric (RET < 12): less condensation.

3 zip pockets, including 1 inner pocket.

Exterior coating to help counter the wind chill.

Fabric treated so that water slides off the surface.

An inshore jacket for sailing in warm and stormy weather.

We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 15,000 mm before and after ageing (5 washes). This is equal to 15,000 Schmerber (the average pressure exerted during rainfall).
This jacket was tested in 2 hours of moderate rain (60 L/m²/h).

- High collar
- Injection-moulded plastic to avoid salt oxidation
- Water-repellent components (water runs off the fabric)
- 100% taped seams
- Central opening features a flap with a drainage channel for optimal waterproofing

The hood is attached and doesn’t stow into the collar.
Height- and depth-adjustable.
The hood visor and headband provide good coverage and a better hold.
The high collar protects your neck.

Features 2 front zip pockets and 1 inner right chest pocket with a rip-tab closure. Note: Pockets are not waterproof.

The full-length zipper includes an inner storm flap that protects you from wind and water,
and the collar has a soft flap to shield your chin.

Front zipper

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for water vapour generated during physical exertion to pass through the fabric.
For example:
RET < 9 = very breathable;
RET 9–12 = breathable.
 
     

This jacket stays lightweight and breathable in wet conditions because water
slides off the treated fabric instead of seeping in. The water-repellent coating applied to the jacket’s exterior may change over time.
To restore it, place the jacket in the dryer for 10 minutes at the lowest temperature.

To preserve its water-repellent coating, do not wash this jacket too often.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Wash it on the synthetics cycle at 30°C or 40°C with your usual detergent. Don’t use fabric conditioner or bleach, as these could damage the water-repellent coating. Very important: Choose a full-rinse cycle or extra rinse.

Drying is a crucial phase in restoring the water-repellent treatment.
We recommend laying your garment flat on a clothes rack to dry. Warning: Never dry your jacket directly on a radiator.
Next, put your garment in the dryer and run a short synthetics cycle (10–15 min.) before turning it right-side-out. Caution: Do not over-dry the garment.

Warm brushed-fleece (240 g/m²) interior and exterior. High neck.

Do not crease | Machine wash at 30°C | Dry quickly

Easy to care for

Weighs 450 g in size L | Fabric density: 240 g/m²

This warm, fleece jacket is ideal for sailing in cool, damp weather (7°C–10°C).

The brushed fleece material has more volume and is naturally insulating, trapping air around the body to keep you warm and comfortable.
It has been lab-tested for a comfort temperature of 7°C to 10°C. Don’t hesitate to wear a extra wind and waterproof jacket to reduce the windchill effect.

Brushed fleece

The soft high collar conserves body heat and protects against the wind.

High collar

By making our polyester from recycled plastic bottles and fabrics, we reduce the use of petroleum-based raw materials while maintaining product quality and performance.

We know that there is still a lot of work to be done to reduce our environmental impact, so we continue to strive for change. 
Learn more about our commitment to using eco-design processes by visiting sustainability.decathlon.com

What is recycled polyester?

This fleece jacket is designed to provide maximum freedom of movement.
You can wear your usual size over a T-shirt or polo, or underneath a jacket.

Breathability is a fabric’s ability to let the body’s perspiration escape. It is measured by the fabric’s resistance to evaporative heat transfer (RET). The lower the value, the greater the breathability. RET 6–9: extremely breathable; RET 10–13: very breathable; RET 14–17: breathable; RET 18–20: not very breathable; RET 20+: not breathable. 100 jacket RET < 12

Breathability and RET index

By making our polyester from recycled plastic bottles and fabrics, we reduce the use of petroleum-based raw materials while maintaining product quality and performance.
We understand the climate issue and are concerned about resource depletion. That’s why our teams aim to apply eco-design principles to all our new products to reduce our environmental impact.

Eco-friendly design

The textile-dyeing process not only uses a lot of water, but also produces large amounts of wastewater. We opted for the dope dye technique to ensure a more eco-friendly product. This means the yarn is dyed before the garment is made.
Dope dyeing saves a significant amount of water, cutting this jacket’s environmental impact in half compared to the previous model.

Dope dyeing

Tested in 2 hours of moderate rain
15,000 mm Schmerber
Non-waterproof pockets

Materials and zippers resist salt water and sea air.

An exterior coating helps to counter the wind chill.

The fabric is treated so water slides off the surface.

3 secure pockets. (1 inner and 2 outer).

This jacket protects you from spray and moderate rain during training and inshore yacht racing.

We measure the water resistance of a fabric in mm (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 15,000 mm before and after ageing (5 washes). This is equal to 15,000 Schmerber (the average pressure exerted during rainfall).
This jacket was tested in 2 h of moderate rain (60 L/m²/h).

1/2 Waterproofing 

- Mid-height collar
- Plastic-moulded zippers to prevent salt oxidation
- Water-repellent materials (water runs off)
- Fully taped seams
Front zip with storm flap and drainage channel

2/2 Waterproofing 

The hood folds into the collarfor a completely different look!
Depth and height-adjustable.


Features 2 front zip pockets
and 1 inner chest pocket with a rip-tab.
Please note: Pockets are not waterproof.

Full-length zipper with an inner storm flap that protects against wind and water.
A soft flap on the top of the collar shields your chin.

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for perspiration to pass through the fabric.
For example:
RET < 9 = highly breathable fabric
9 < RET < 12 = breathable fabric
The RET of the Sailing 100 anorak is 12.

Water slides off the jacket’s surface without seeping in.
The material stays lightweight and breathable. The water-repellent coating applied to the jacket’s exterior may change over time.
You can restore the water-repellent properties by putting the jacket in a dryer for 10 minutes on the lowest temperature.

To maintain the water-repellent properties, infrequent washing is recommended.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Wash it on the synthetics cycle (30°C–40°C) with regular detergent. Don’t use fabric softener or bleach, as these could damage the water-repellent coating.
Very important: Run a full rinse cycle or extra rinse.

Washing your jacket

Drying is a crucial phase in restoring the water-repellent treatment.
We recommend laying your garment flat on a clothes rack to dry. Warning: Never dry your jacket directly on a radiator.Next, put your garment in the dryer and run a short synthetics cycle (10–15 min.) before turning it right-side-out. Warning: Do not over-dry.

The ABCDE rating shows the environmental impact of a product. Put forward by ADEME, it takes into account production, transportation, usage, and waste generated at the end of a product’s life. Decathlon displays this information voluntarily. Learn more at sustainability.decathlon.com

Our products’ environmental impact

The oilskin-coated fabric resists moderate rains. 15,000 mm Schmerber

Made from 100% polyester, windproof lining.

Water beads and streams off the fabric for lasting resistance in wet weather.

5 pockets: 2 fleece-lined, 2 large, and 1 zippered inner pocket.

This jacket was designed to protect sailors from sea spray and heavy rain while they’re out on the water.

Professional dry cleaning with tetrachloroethylene and all solvents listed opposite the F symbol. Normal cycle.

With Zipper

Tapping

Tightening Type

Fastener Type

This dual-coated, waterproof oilskin jacket was tested
under simulated rain conditions. It can withstand   2 hours of moderate rain (60 L/m²/h). 
Fabric resistant to water pressure of up to 15,000 mm Schmerber. Made of water-repellent fabric
with watertight seams.
The front zipper is protected by a storm flap and drainage channel.

Waterproofing

To determine fabric breathability, 
we measure its resistance to evaporative heat transfer (RET). An RET < 9 means that this coat is highly breathable, i.e., it allows the body’s perspiration escape.

We’ve added an extendible cuff to the sleeves to keep the warmth in and the wind out.
The cuffs are easily adjustable with handy hook-and-loop tabs.

5 secure pockets:
2 fleece-lined pockets to keep your hands toasty,
 2 spacious pockets for gear,
 and 1 inner pocket on the left-hand side.

The 2-way zipper lets you open the jacket from the bottom for greater range of movement.

2-way zipper

Adjustable hood comes with
a discreet fastener on the inside to adapt its depth and
 side pulls to tighten the hood around your face. A
slim visor on the front of the hood keeps the rain off your face.

Hood features

This long, oilskin-coated anorak has a flattering, fitted cut.

Product cut

Plastic-moulded zipper is resistant to salt oxidation.

Resistance to wear

Close all zips and flaps and remove any parts of the garment that cannot be washed. Loosen the straps and drawstrings and empty the pockets. 
Then turn the garment inside out to wash it.

How to restore water repellency 
Step 1: Before washing

Wash the jacket using the synthetics cycle (30°C–40°C) with regular detergent. Don’t use fabric softener or bleach, as these could damage the water-repellent coating.

Don’t fold your garment too much when you place it in the washing machine. Do not overload.

Very important: Run a full rinse cycle or extra rinse to remove all detergent residue.

How to restore water repellency 
Step 2: Washing

If water no longer runs off the surface of your jacket, even after following the washing and drying guidelines, we recommend that you restore its water repellency using a waterproofing spray.

How to restore water repellency 
Step 3: Drying

The lining around the sleeves only has one thread colour. The thread is created using a dope dyeing process, which uses less water and limits the environmental impact of the product.
Mesh and zippers also made from 100% polyester.
.

Eco-friendly fabric and technical features

Dual knit design for warmth and breathability | Comfortable in 10°–13°C weather.

Manufactured to eliminate waste and reduce impact.

This elegant, sailing pullover will keep you warm when sailing in cool weather, between 10°C and 13°C.

Our designers were inspired by the sailor codes when designing this jumper. It features 4 buttons near the collar and a mesh knit for an authentic sailor look.

A sweater inspired by sailing.

100% cotton
We set out to design a unique garment with a breathable moss stitch above the arms and a dense pique knit below the sleeves. This choice makes the sweater lightweight and easier to move around in.
A straight knitting process allowed us to achieve a neat finish.

100% mesh knit

We intentionally designed this sweater as a knit garment. The yarn is knitted before the piece is assembled. As a result, we are able eliminate fabric waste.
Its environmental impact is 10% lower than similar products.

What makes this pullover eco-friendly?

The cut is intended to be fairly tight-fitting, while still having a straight cut. For a slouchy fit, choose a larger size.
The 4 collar buttons make it easy to put on.

This pullover pairs well with Tribord cotton pants and can be worn over a traditional sailing top. Complete the look
with a pair of boat shoes!

Compact enough to pack into one of its pockets.

This jacket is designed for sailing in warm, stormy weather.

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for water vapour generated during physical exertion to pass through the fabric.
For example:
RET < 9 = very breathable;
RET 9–12 = breathable.
The RET of this sailing jacket is 12.

Outsole made of non-marking, non-slip, flexible rubber.

Grip

Full-grain leather outer, lined inner. Quilted collar and tongue.

Fitting comfort

These boat shoes were designed for sailing in dry weather.

Sports/

Water sports/

Sailing/

Rain boots/

tribord

Leather Boat Shoes – Men’s