Bike Inner Tube - Schrader 700 x 35/45 48 mm

Compatibility

700 x 35 to 700 x 45 tires. 48 mm (2") valve. ETRTO 35/45 – 622

Waterproof

Optimized composition to guarantee your inner tube has a good seal.

How to choose your inner tube

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 700 x 35 means that the tire is 700 mm in diameter and 35 mm wide. The dimensions in mm are also on the tire sidewall. For example, 36-622 means that the tire is 35 mm wide with a 622 mm inner diameter (approx. 700 x 35).

Removing an inner tube

Remove the old inner tube using Btwin tire levers.

Checks to carry out before installing an inner tube

Check the condition of your tire and replace it if necessary. Make sure no objects are lodged in the tire. Check the condition of your tire rim strip. A rim strip that’s even slightly bent can cause punctures. Check that your rim doesn’t have any other issues that could damage your inner tube.

Installing the inner tube

Watch our video before you start. Pre-inflate the inner tube slightly to avoid pinching. Make sure you’re using the correct valve for your rim and then insert it. Put the entire inner tube inside the tire so that it fits inside the rim. Take care not to pinch the inner tube when installing it.

Installing the tire

Start installing the tire at the valve. Finish installing the tire across from the valve to avoid pinching the inner tube. Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Inflating the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI). Regularly check that your tire is in the correct position as you inflate it.

Our professional advice

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Weight:

165 g (6 oz.)