clearance

Durable fabric inserts. Ultra-durable Coats thread.

Durability

Stretch fabric on the seat, knees, and lower legs.

Freedom of movement

Synthetic fabric used for its quick-drying properties

Quick drying

Reinforced, water-repellent front and rear zones.

Water repellent

Light, breathable fabric used in low-friction areas.

Breathability

5 secure pockets including 4 with a zipper and 1 with a flap and press studs.

Pockets

These pants weigh about 410 g (14.5 oz) in size L. 

Weight

Eco-design

These resistant pants are designed so you can hike for as long as possible.

Waterproof

modular

Windproof

Frequency

Pocket

reinforced area

Number of Pockets

belt height

Type of Length

Weather Conditions

Type of Bell

Place of Practice

Main Material

In three colours available for these pants (blue, black and brown),     

How are the blue, black and brown models eco-designed?

Pants with 2 different components:
- a durable fabric (207 g/m²) on the areas that need protection from abrasion (seat, bottom of the legs at the front). This fabric also has stretch. Offering plenty of freedom of movement.
- a lightweight and breathable fabric (125 g/m²) on the rest of the pants.

Dual-component structure

2 zipped hand pockets
1 zipped pocket on the right thigh with 1 phone compartment
1 pocket with a flap on the left thigh
1 zipped back pocket
Elastic tightening system at the hems so that the pants fit perfectly over the boot
Pants sold with a belt

Accessories

These pants have water-repellent inserts (bottom of the legs at the front, seat) that make water run off the surface of the fabric. This product is water-repellent, not waterproof.
These water-repellent pants won’t get wet too fast, but they don’t keep you dry under steady rain. To do this, you will need a pair of over-pants like the MT 500 model (ref. 8493660)
The water-repellent properties can be restored by warming the pants in a tumble dryer at low heat for 10 minutes.

Water-repellent properties

The regular cut and use of stretch fabric in the right areas guarantee high comfort when moving around.
This product is true to size.

83.7 cm (33”) in size L
Hem width: 21.3 cm (8.4”) in size L

Sizing information

Tops & Bottoms

Reinforced fabric stops tears and reduces accelerated wear and tear.

Cotton and polyester blend that dries quickly.

Anatomic design

These pants are designed so that you can travel the world with confidence, whatever the environment.

Iron - maximum temperature of 110Â°c - no steam

Options

Duration

The weft weave makes the fabric more durable than an equivalent but smoother material. 

This fabric will not let you down!

Use the removable belt to adjust the pants to your body shape. You can also use the belt on other pants and shorts, as it’s a standard size.

Removable belt

These pants have 8 pockets for your backpacking essentials: 
- 1 side pocket fastened with a zipper
- 1 small ticket pocket
- 2 flap pockets on the bottom with press studs
- 2 hand pockets
- 2 cargo pockets on the sides with press studs

Multiple pockets

Comfortable between 5°C and -5°C. Down with a fill power of 800 cuin.

Warmth

Easily folds away into its left-hand pocket with a double-pull zipper.

Compact design

Surface-treated outer fabric prevents water infiltration.

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

Abrasion resistance

This down jacket weighs approximately 430 g (15 oz.) in size L.

This down jacket keeps you warm during your cool weather hikes. Effective to -5°C for intense activity and 5°C for light activity.

Maximum wash temperature of 30°C. Very delicate cycle.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Air Temperature

Condition

Pack

thumb pass

sleeve length

Hood

Style

Worn as a third layer, this padded jacket has been certified for an active comfort temperature of -5°C during a standardized test in a thermal chamber. The model is wearing a synthetic, long-sleeved T-shirt and a light fleece underneath. Effective in simulated 5 km/h wind. 
We also tested this product in static mode: the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking:

- Thermal insulation, because of the air trapped in the down and feathers.
Ultra-lightweight: down is lighter than synthetic fill and provides the same warmth. This saves even more weight in your backpack.
- Ultra-compressible.

The advantages of duck down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches).
Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation.With an 85% down and 15% feather filling, this jacket has a guaranteed fill power of 800 cuin or more (international standard).

Measuring the fill power of down and feather wadding

A fabric’s water repellency is its ability to make water run off its surface without being absorbed.
This prevents the fabric from absorbing water and keeps it lightweight and warm. The fabric in this down jacket is water-repellent, although we recommend you wear a waterproof jacket over top in the rain. The fabric is made water-repellent by treating its outer surface, but the treatment can deteriorate with use. 
We recommend restoring it after each wash.

Water repellency (not to be confused with waterproofing)

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
 
In short: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Gentle spin cycle.

2. Tumble dry with 2 or 3 tennis balls and repeat 2 or 3 times until it is completely dry.

How to care for down jackets

Once you have cleaned your padded jacket, we recommend using a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water-repellent properties and optimizes its performance throughout its life cycle.

How do I reactivate the waterproofing properties?

Snags are common when hiking in a padded jacket. Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres escape. 
Not sure about repairing it yourself? Don’t worry! Our in-store workshops offer a repair service to mend your padded jacket with an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 70 g
S: 76 g
M: 81 g
L: 87 g
XL: 94 g
XXL: 100 g
XXXL: 112 g

Filling weight

Jackets & Sweaters

Woven fabric (prevents tears from worsening). Strengthened pocket bottoms.

2-in-1 pants turn into shorts via their zipper.

Flexibility

8 pockets, including 5 secure ones and 1 secret one, plus a hook for keys.

Uses a bi-stretch fabric that stretches in four directions.

The synthetic fabric wicks moisture and dries quickly.

Fabric wicks away perspiration for greater comfort when hiking.

We developed these resistant, adjustable pants for you to travel the world with complete peace of mind.

There’s nothing worse than carrying a heavy, overloaded backpack! 
A backpacker’s best friend is their bag. You will be walking for many hours wearing your backpack. It is therefore essential that you choose your equipment carefully to keep the weight down and travel with as light a load as possible. 
Pack the most “multi-functional” and modular clothing possible. 
The aim: clothing suited to several situations.

Why must clothing be modular?

Losing your passport or having your phone stolen while backpacking is incredibly frustrating. 
To prevent this and ensure you travel worry free, we have added zippered and secret pockets. 
Hide your bank card in the secret pocket under the belt, fasten your keys to the snap hook, and keep your wallet in one of the zippered pockets.

Keeping your belongings secure is a top priority!

When packing your backpack, you always wonder whether your clothing will measure up to your adventures and go the distance! Our materials and design guarantee sturdiness. For these pants, we chose a 186 g/m2 ripstop fabric and strengthened thread.

Hard-wearing clothing for backpackers!

It is not a matter of taking a stack of pants in your backpack—or having a single pair of stained pants at the end of the day, either!
To allow you to travel with complete peace of mind, we designed these pants with a quick-drying component so you can wash them in the evening and wear them the next morning.

How to stay clean when travelling?

The product’s environmental impact is calculated over its entire life cycle using various indicators. An ABCDE rating shows the environmental impact of a product. Put forward by ADEME, it takes into account production, transportation, usage, and waste generated at the end of a product’s life. 
Decathlon displays this information voluntarily to help you identify products with lower environmental impact. 
Learn more at sustainability.decathlon.com

Our products’ environmental impact

Durable fabric stops tears from getting bigger and reduces wear.

Semi-elastic waistband with soft lining fabric. Preformed knees.

A quick-drying, synthetic fabric providing breathability.

The front and rear reinforced areas are water repellent.

Lightweight synthetic fabric that lets body heat escape.

Lightweight, compressible fabric. These pants weigh about 330 g in size 44 (L).

Machine-washable synthetic fabric; does not require ironing.

Easy to care for

These clever pants were designed to convert into shorts so you can adapt to the weather.

Iron at a maximum soleplate temperature of 150°C.

Jacket Type

For the main fabric, we decided to use a more environmentally friendly dyeing process.

Fabric dyeing uses a lot of water and produces waste water from the dyeing baths. We have opted for mass pigmentation (also called Dope Dye) to reduce the environmental impact, integrating the colour pigments from the initial thread manufacture.

Reduced CO2 emissions by 37% compared to the old model.

To guarantee unfailing durability, a light fabric (150 g/m²) was used on the knees and seat, made from 200 denier polyamide yarn (on the warp) and 320 denier (on the weft). Indestructible!

These pants have water-repellent inserts (knees, seat) so water slides off the fabric's surface. This product is water repellent, not waterproof.

These water-repellent pants won't get wet too fast, but they don't keep you dry under steady rain. For this, we recommend that you wear waterproof pants such as the Trek 500 (prod. code 8493660).

Water-repellent properties can be reactivated by putting the pants in the dryer for 10 mins on low.

Water-repellent property information

To make it easy to identify the bottom of the legs, we have used a red zipper pull on the right leg and a grey on the left. You will not mix them up.

Partially elastic ankles to better fit your trekking shoes!

Features

Sports cut that offers good freedom of movement. 

78.9 cm pants inseam in size 36 (L)
24 cm shorts inseam in size 36 (L)

Sizing info

We recommend that you always wash the pants with the bottom of the legs zipped up to ensure that the colour washes out evenly!

What about care

Main fabric with a density of 190 g/sqm made of 86% wool

Conductive material on the thumb and index finger for touchscreen use.

Tactile efficiency

Wool yarn sheathed with a polyamide filament to optimize abrasion resistance.

These fine liner gloves are great for handling small objects.

Dexterity

Wool knit allows water vapour to escape so that your hands stay dry.

These wool liner gloves are soft to the touch and provide additional warmth in cold weather.

Professional dry cleaning with tetrachloroethylene and all solvents listed opposite the F symbol. Normal cycle.

anti-slip

reflective

Reinforced Palm

Water-Repellent

Tightening Type

The dexterity of a glove is its ability to handle objects with ease. Our liner gloves have been given a score from 1 to 5 in a laboratory study. The closer the score is to 5, the easier it is to handle objects as if you weren’t wearing gloves. 
In particular, tests were done to measure how easily it is to get a jacket on and handle the zipper while wearing these liner gloves.

What does the dexterity of a glove refer to?

Size - Circumference of palm

3XS - 16.9-17.7 cm (6.7-7 in)
2XS - 17.8-18.5 cm (7-7.3 in) 
XS - 18.6-19.3 cm (7.3-7.6 in)
S - 19.4-20.1 cm (7.7-7.9 in)
M - 20.2-20.9 cm (8-8.2 in)
L - 21-21.7 cm (8.3-85 in)
XL - 21.8-22.5 cm (8.6-8.9 in)
2XL - 22.6-23.3 cm (8.9-9.1 in)
3XL - 23.4-24.1 cm (9.2-9.5 in)
4XL - 24.2-24.9 cm (9.5-9.8 in)

Size chart

When worn under hiking gloves, these liner gloves will give you 3°C of additional warmth.

This corresponds to the ambient temperature at which 100% of testers felt comfortable.
For better protection, we recommend that you wear gloves over the liner glove.

All our gloves are lab-tested using a thermal hand to determine their level of insulation and minimum temperature rating. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h (6 mph) winds. These temperature ratings are only valid in walking conditions.


How is the comfort temperature measured?

Optimize the insulation of your hands by applying the layering principle. Wearing liner gloves in addition to gloves creates several air pockets that effectively insulate your hands from the cold. To achieve this, the gloves must be big enough not to compress your fingers. This is because compression slows down blood flow in the fingers, which prevents them from staying warm.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If your clothing is inadequate, your body cools, and circulation to your hands and feet drops to keep your upper body warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

We recommend that you machine wash your merino wool liner gloves at 30°C on a normal cycle, preferably with liquid detergent. 

Dry them on a flat surface, away from moisture and all sources of heat. This could damage the fibre and make them lose their shape. Never put them in the dryer.
   

How to maintain your merino wool liner gloves

These gloves do not protect against the spread of viruses or microbes.

Warning!

Hats, Gloves & Neck Warmers

Brushed fleece inner lining: pants comfortable down to -18°C

PFC-free water-repellent material: sheds water without absorbing it.

2 hand pockets and 2 flap pockets for personal belongings.

Ease of use

Straight cut. Elastic waistband and flat adjustable buckle

Stretch

Semi-elastic waist and ankles to keep out snow

Limits snow entering

Perfect pants for hiking in extremely cold weather. Extremely warm fleece inner and water-repellent outer fabric offer great comfort.

Ventilation Zippers

Season

Type of Brushing Boots

RECCO system

With Straps

The fleece traps air, which acts as a natural insulator, keeping the body warm. The brushed knit fabric traps air.

Fleece material: insulates with air

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by applying a PFC-free treatment to the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime (recommended after each wash). Products are available for this purpose in our stores. 

Component water resistance

onlyonline

Stretch fabric (2% spandex) and loose fit

4 pockets | 1 thigh pocket (hook-and-loop tab) | 2 hand pockets | 1 rear pocket

Easy transport

Main component contains 79% organic cotton.

Softness

Regular fit | Available from size S to 3XL

Belt with wide loops | Press stud fastening

User comfort

The main fabric contains small quantities of polyester to wick away moisture

Lightweight

Designed for occasional hikes on easy trails.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

The pant material makes them pleasant to wear between seasons or in summer, as it is not too hot.

Three-season pants

The pant material contains spandex. If you are between two sizes, choose the smallest of the two. After washing, the pants may seem a little tight. However, they will loosen after use (like a pair of jeans with spandex).

Our advice for choosing your size

The fabric of these pants contains 79% organic cotton.
We began using organic cotton in 2006, a market that currently represents just 0.4% of worldwide cotton production. The cotton is grown without chemical fertilizers or pesticides. It protects biodiversity, soil fertility and reduces the risk of groundwater pollution. This is still not enough and that’s why we are working to make this product eco-designed.

Our environmental approach

Thanks to all your feedback, we have improved the concept and design of the NH 100 pants. The stretch component of this new model increases your freedom of movement. We also improved comfort (softness of cotton, width of the waistband) and drying speed (synthetic component). Finally, we also took into account your feedback on the depth of the pockets and the cut of the pants.

Your opinion is important to us!

Lightweight synthetic fabric wicks away perspiration. 

Moisture wicking

The synthetic fabric wicks away moisture and dries quickly.

Sports/

Outdoor/

Hiking/

Tops & Bottoms/

forclaz

Trek 100 Mountain Trekking Modular Trousers – Men