3.4 cm wide prism for panoramic field of vision.

Field of vision

Image quality

Steadier and more comfortable to wear thanks to rubber on nose and support strap

Stability

Thermoformed shell protects glasses, which attach to harness.

Content protection

Easy to care for

We have developed these glasses for belayers of all levels who are tired of having a sore neck, indoors or on the cliff.

lightweight frame, only weighing 43 g, whilst you get the benefit of having a wide prism.(without strap)

Total weight

Gear

Keylock shape and flat tint on the carabiner for easier handling.

Easy opening/closing

Lightweight

This versatile quickdraw is designed for climbing and mountaineering.

Skill Level

New patented system for gate opening / closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Carabiner:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

Strap
Length: 11 cm (4 1/3")
Width: 16 mm (2/3") 

Technical features

Quickdraws should be cleaned with fresh water and dried away from a source of heat. Do not use chemicals.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the quickdraw in a dry, cool and ventilated place, away from UV and chemicals.
For more details, refer to the instructions for use.

Storage and transport

Guidelines for use

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018
The straps are certified   EN 566: 2017

Certification

clearance

Breaking resistance

Warning, red visual indicator is visible when karabiner is open.

Our team of climbers designed this snap hook for hooking up a belay system to a harness or for climber safety during rope manoeuvres.

Type of Snap Hook

Carabiner Shape

Anti-Cross-Loading

Gate Opening

Breaking strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

TECHNICAL FEATURES

The karabiner must be cleaned with fresh water and dried away from a heat source. Do not use any chemicals.
For further details, refer to the user guide.

CARE INSTRUCTIONS

Store the karabiner in a dry, cool, well ventilated place, away from UV rays and chemicals.
For further details, refer to the operating instructions.

STORAGE ADVICE

Carefully read the instructions before using.

DIRECTIONS FOR USE

UIAA Dry  hydrophobic treatment core and sheath. PFC free.

Waterproof

At 39 g per metre (1 1/3 oz. per yard), you won’t even feel it in your backpack.

This thin rope is smooth, light and compact.

Ergonomic grip

Absorbs fall force well with 7 kN impact force rating.

Stretch

Complies with 2 standards: Half rope and twin rope.

Versatility

We use a dope-dyeing process to reduce the environmental impact.

Eco-design

This lightweight, compact rope is perfect for easy alpine snow climbs, glacier walking, ski touring or setting up a handrail.

Diameter

Type of Climbing Rope

Weather Protection Type

Rope Length (m)

Sheath and core treated with water repellent finish (PFC free) to prevent water absorption. Less than 2% water retention.
The mechanical features help the rope last longer in cold and wet conditions.

UIAA Dry treatment:

Special treatment makes the rope smoother.

Plasma fluid treatment:

39 g/m (1 1/3 oz./yd)

Please note: Rope weights are set according to the EN 892 standard.
For example, a single rope must hold 10 kg (22 lbs) for 1 minute under specific temperature and humidity conditions.
This determines the rope’s actual weight, which is often superior to the weight given by the standard. 
The weight according to the standard is used to compare two ropes.

Weight:

Number of falls: 6/12
Impact force: 7/10.6 kN
Dynamic elongation: 28.5%/27.6%
Static elongation: 8.7% / 4.6%
Sheath slide: 0
Number of spindles: 32

Number of falls: 

Dyeing fabrics requires a lot of water and leads to a lot of waste water from the dyeing tanks. To reduce this environmental impact, we opt for the dope-dyed technique whereby the colour pigments are incorporated into the yarn during its manufacture.


More information on sustainable development:

It’s important to properly care for your rope to reduce wear.
We recommend the following:
1- Use a rope cover.
2- Wash off dirt under lukewarm water. 
If stains persist and you want to wash the rope with soap, use a pH-neutral soap (such as Marseille or household soap) and then rinse thoroughly with clean water.
3- Air-dry away from sunlight and heat sources.

Washing the rope:

Store in a cool, dry place away from direct light and corrosive agents. Never leave your rope in a car on a hot summer day.

Storing the rope:

It’s important to check your rope regularly. Run it through your hands and inspect it metre by metre. This will allow you to spot any nicks, cuts or weak spots. If you notice any abnormalities, if the core is visible, if the rope is deformed or if the rope has exceeded its fall rating, it must be replaced.  Take safety seriously!

Inspecting the rope:

Standards/certification

Bags & Ropes

Reduced volume for a minimal space requirement in the harness.

Compact design

Breaking strength of 2200 daN (kg) greater than that of a strap knot.

Durability

Available in 3 sizes easily identifiable by colour code-60/120/175cm

Ease of use

Flat strap rings, light and compact for minimal space requirement.Ideal for multiple uses in mountaineering, climbing and all vertical sports

Rope Length (cm)

Excellent weight distribution thanks to wide, very dense EVA foam pads.

User comfort

4 buckles for a better fit and good centring of the tie-in loop.

Weight

Reinforced upper and lower tie-in loops: better wear-resistance.

Robustness

Our instructors and climbers designed this harness to give you the highest level of comfort and versatility, wherever you climb.

Thigh Adjustment

Waist Belt Adjustment

GEAR LOOP

EASY ON/OFF

Fully adjustable.
 The advantage is that it adapts to fit all body shapes as well as clothes made for various activities (shorts, tights, trousers, overtrousers, etc.).
Sizes:2 buckles
Leg loops: 2 buckles

Available in 2 sizes

ADJUSTMENT

Size S to M: waist size: 65 cm to 90 cm
thigh sizes: 32 cm to 60 cm

size L to XXL:
waist size: 82 cm to 110 cm
thigh sizes: 35 cm to 70 cm

SIZING TIPS

We recommend that you wash your harness in warm soapy water (pH neutral) at 30°C maximum. Rinse thoroughly with tap water (do not use a high pressure water jet).
Dry your harness on a drying rack. Do not tumble dry.

Shoes & Harnesses

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

The rubber part keeps the carabiner in the main axis for safety

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Impact protection

Ventilation

ABS shell construction protects helmet from everyday scratches

Abrasion resistance

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Style

Detachable Visor

Fastener Type

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Keylock locking mechanism makes it easier to use

Breaking strength:
Major axis:  30 kN
Minor axis: 10 kN
Open gate: 10 kN

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

the rubber part keeps the karabiner in line with the major axis for safety

Designed for clipping into anchors on the crag, or to secure a route for alpine rock climbing.

Sports/

Outdoor/

Climbing/

Bags & Ropes/

simond

Climbing Single Lanyard 75 cm