Main fabric with a density of 190 g/sqm made of 86% wool

Warmth

Conductive material on the thumb and index finger for touchscreen use.

Tactile efficiency

Wool yarn sheathed with a polyamide filament to optimize abrasion resistance.

Abrasion resistance

These fine liner gloves are great for handling small objects.

Dexterity

Wool knit allows water vapour to escape so that your hands stay dry.

Breathability

These wool liner gloves are soft to the touch and provide additional warmth in cold weather.

Professional dry cleaning with tetrachloroethylene and all solvents listed opposite the F symbol. Normal cycle.

Only with oxygenated, non-chlorinated bleach.

Maximum washing temperature 60°C. Normal cycle.

Maximum washing temperature 30°C. Normal cycle.

Waterproof

Options

Air Temperature

Condition

Windproof

Frequency

anti-slip

reflective

Weather Conditions

Reinforced Palm

Water-Repellent

Tightening Type

Main Material

The dexterity of a glove is its ability to handle objects with ease. Our liner gloves have been given a score from 1 to 5 in a laboratory study. The closer the score is to 5, the easier it is to handle objects as if you weren’t wearing gloves. 
In particular, tests were done to measure how easily it is to get a jacket on and handle the zipper while wearing these liner gloves.

What does the dexterity of a glove refer to?

Size - Circumference of palm

3XS - 16.9-17.7 cm (6.7-7 in)
2XS - 17.8-18.5 cm (7-7.3 in) 
XS - 18.6-19.3 cm (7.3-7.6 in)
S - 19.4-20.1 cm (7.7-7.9 in)
M - 20.2-20.9 cm (8-8.2 in)
L - 21-21.7 cm (8.3-85 in)
XL - 21.8-22.5 cm (8.6-8.9 in)
2XL - 22.6-23.3 cm (8.9-9.1 in)
3XL - 23.4-24.1 cm (9.2-9.5 in)
4XL - 24.2-24.9 cm (9.5-9.8 in)

Size chart

When worn under hiking gloves, these liner gloves will give you 3°C of additional warmth.

This corresponds to the ambient temperature at which 100% of testers felt comfortable.
For better protection, we recommend that you wear gloves over the liner glove.

All our gloves are lab-tested using a thermal hand to determine their level of insulation and minimum temperature rating. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h (6 mph) winds. These temperature ratings are only valid in walking conditions.


How is the comfort temperature measured?

Optimize the insulation of your hands by applying the layering principle. Wearing liner gloves in addition to gloves creates several air pockets that effectively insulate your hands from the cold. To achieve this, the gloves must be big enough not to compress your fingers. This is because compression slows down blood flow in the fingers, which prevents them from staying warm.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If your clothing is inadequate, your body cools, and circulation to your hands and feet drops to keep your upper body warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

We recommend that you machine wash your merino wool liner gloves at 30°C on a normal cycle, preferably with liquid detergent. 

Dry them on a flat surface, away from moisture and all sources of heat. This could damage the fibre and make them lose their shape. Never put them in the dryer.
   

How to maintain your merino wool liner gloves

These gloves do not protect against the spread of viruses or microbes.

Warning!

Hats, Gloves & Neck Warmers

Two sides with two distinct functions. Can be folded away in its storage bag

Ease of use

This survival blanket can be reused multiple times

Reusable

This disposable survival blanket protects you from cold or heat during emergencies.

Orange side retains heat: reduces the risk of hypothermia. Maintains body temperature and protects against wind and moisture.

Orange side

Silver side keeps you cool and offers protection from the sun's rays: stays cool (e.g., cars, tents).

Silver side

Dimensions

To prevent suffocation, do not cover the head. Do not use the survival blanket in thunderstorms, near burning materials, or if electrosurgical equipment is used (e.g.,  DSA). Do not cut or perforate. Store in a dry place.

Precautions

Care

Contains basics to treat small wounds and make bandages.

Versatility

Multiple compartments

A first aid kit designed to take care of minor injuries on your hikes.

8 large dressings
8 medium dressings
8 small dressings
1 crepe strip
6 disinfectant wipes
4 gauze pads
1 set of suture strips
1 adhesive bandage
1 pair of scissors
1 pair of gloves
1 tick remover
1 bar of soap

Add anything else you need (does not include medicine)

Kit contents

Wool fibre encased in polyamide yarn for protection.

Durability

Merino wool combines warmth and compact design

Wool naturally helps prevent unpleasant odours.

Odour control

Ultra-fine (18.5 micron), soft merino wool. Not itchy.

Softness

Wool’s highly absorbent nature helps keep the head dry

Moisture management

This merino wool hat was designed to stave off the cold while trekking.

Ironing at a maximum iron soleplate temperature of 200°C.

Maximum wash temperature 70°C. Normal cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Type of Beanie

beanie compatible with

Style

Reinforced fibre for lasting durability: A new yarn structure includes a polyamide yarn sheath that protects the merino wool fibres against friction and cuts.
Weighs 155 g/m².

Resistance

We only use wool from Merino sheep raised on farms in South Africa where mulesing is forbidden.

Origin of the wool

Caps, Hats & Sunglasses

Weighs 60 g. Can be folded 4 times to save space
Folded dimensions: 29x9.5x4.5cm

Easy transport

The foam provides thermal insulation.
R-Value 1.3.

Thermal insulation

This seat was designed to protect you from the ground during breaks while trekking or camping.

The foam provides thermal insulation.
R-value 1.3.
The R-value expresses the thermal performance and resistance of the mattress. The higher the R-value, the better the mattress insulates you from cold ground.
An R-value of 5.9 means a minimum temperature of use of about -24°C. 0.7 corresponds to +11°C
The R-value is not a standard, and each manufacturer can use their own criteria. A standardization process is currently underway.

Thermal properties and warmth

Open dimensions: 39 x 29 x 2 cm.
Folded size: 29 x 9.5 x 4.5 cm

Dimensions:

Camping Mattresses, Sleeping Pads & Mats

Fast acting

Designed for hikers seeking an effective and quick lacing system.

Skill Level

shoelace shape

Shoe Height

Packaging

Sock Height

Socks, Insoles & Gaiters

Contains the essentials for dealing with minor cuts and support injured limbs.

Lightweight, compressible bag with 3 compartments.

This first aid kit contains everything you need to treat minor wounds and cuts, and to provide basic limb support.

1 bar of soap
1 self-adhesive strip
8 cleaning wipes (large)
2 non-woven compresses
6 gauze compresses
1 crepe strip
1 roll of medical tape
1 paper bandage
1 pair of tweezers
1 pair of vinyl gloves
2 saline solutions
18 dressings (S/M/L)
 1 set of suture strips
1 pair of scissors
1 cut-to-fit bandage
1 tick remover

Fully taped seams. 2-layer coating that can withstand a 5,000-mm column of water.

20 cm (7 ¾”) side openings and perspiration-wicking component (RET = 12).

Lightweight

Removable, adjustable hood. Removable and adjustable hood, adjustable cuffs, tightening cord at the hem.

Anatomic design

2 zipped hand pockets and 1 zipped inside pocket to keep your belongings safe.

Pockets

This low-cost waterproof jacket was developed for occasional hikes.

Ventilation Zippers

Jacket Type

Season

Number of Pockets

sleeve length

Membrane Construction

Place of Practice

Pocket

Lining Material

type of waterproofing

thumb pass

breathability (in RET)

Type of Length

Hood

Zipper Type

Schmerber

The feminine cut of this jacket suits different body types. You can wear a warm layer underneath, such as a fleece jacket or light sweater. The interior lining also improves comfort. 
You can choose your usual size or one size up if you want a looser fit.

Detach the hood using snaps. Adjust the height using an elastic cord and adjust the depth with the hook and loop tab at the back.

This jacket is made with 2 coated layers, including a large mesh lining. 
That means the jacket has an outer fabric and a lining. 
A coating similar to resin is applied to the inside of the fabric, making the material waterproof yet breathable. The jacket’s inner lining protects this coating.

Jacket composition

Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column. The higher the water pressure, the more waterproof the fabric. 
The component of this product has a waterproof rating of 5,000 mm: it can withstand the pressure exerted by a 5,000-mm column of water. 
This is also equivalent to 5,000 Schmerbers.

Waterproofness test

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity and prevents it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Breathability test

The water-repellent property of a fabric is its capacity to make water run off its surface without being absorbed. This keeps the fabric from soaking up water so it stays lightweight and breathable. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.

How to restore the water repellency

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiast. It’s the perfect spot for designing our mountain hiking products.

Product design: our expertise

This jacket was designed in our international design centre at the foot of Mont Blanc, in France, and then manufactured and assembled by our suppliers in Morocco, Vietnam, and Bangladesh.
These partners have genuine expertise in making our products, and we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.
By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment, and environmental protection.

Working conditions in our production workshops

Jackets & Sweaters

Carrying comfort

1 main compartment with a double zipper | 1 deep outer compartment

Volume: 10 L (2.2 gal) | Weight: 145 g (7 oz.) | Dimensions: 39 x 21 x 12 cm (15.3 x 8.2 x 4.7”)

Capacity

We have reduced the environmental impact by dyeing the thread before weaving it.

Eco-design

Durable, abrasion-resistant components and assemblies | 10-year warranty

Ventilation

Carry the bag horizontally when hiking for easy access to the outside pocket.

The  NH 100 10 L backpack is perfect for all kinds of hikes, whether in the field, forests or coastline.

Maximum wash temperature 95°C. Normal cycle.

Volume (L)

Duration

Frame

Bag Type

Weight (g)

Number of Compartments

Fastener Type

The volume of each backpack is measured using a standardized method: the main compartment and all the pockets are filled with little balls. These balls are then emptied into a graduated container to get the equivalent volume in litres.

How is volume measured?

1 - Loosen all the straps (straps, belt, and load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

How to adjust your backpack

Put heavy items at the bottom. Pack your clothes around these items. Keep your waterproof jacket and/or fleece in an easy-to-access location. Place small frequently used items in the pockets (sunscreen, map, glasses, etc.). 

How to pack your backpack

The backpack’s components were validated in the lab: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness when subject to UV light and washing, and waterproofing. We also check the resistance of its construction using a dummy that reproduces a hiker’s movements to replicate several years of wear and tear.

Tested for optimum durability and strength

Thanks to your feedback, we have improved the design of the NH 100 10-litre (2.2 gal) backpack.
On this new model, we added a double zipper on the main compartment and a larger pocket bottom on the outside pocket. The aim is to not lose your belongings when opening your bag. 
And of course, the price hasn’t increased!

Your opinion is important to us!

Hiking Backpacks and Travel Bags

onlyonline

12 dressings, 6 cleaning wipes, 4 gauze compresses, medical tape, and bandages.

This refill contains items to replenish the contents of your first aid kit.

12 dressings
6 cleaning wipes
4 gauze compresses
1 roll of medical tape
1 bandage

Pack contents

Attaches with 2 elastic straps around the backpack’s shoulder straps.

The built-in storage pocket makes it compact when folded away.

Compact design

Compatibility

This basic rain cover was designed to protect your 20-L to 40-L backpack from the rain and increase visibility.

Type of Cover

Foldable

carrying system

The colour was chosen because it’s important to stay visible in the mountains in case of an emergency. The bright yellow can easily be spotted by searchers in the air. 
It’s also visible on the road when cycling.

Why are our rain covers yellow?

To help preserve our natural playground, Quechua is committed to limiting the environmental impact of its products.  
This product is not yet eco-designed, but we are working on making it more responsible using a solution that consumes less water in the dyeing process. Coming soon!

Our environmental approach

Can contain up to 10L. The bag weighs 45 g when empty.

The bag folds up to occupy very little space.

Black fabric is dope-dye yarn that reduces the pack's water energy footprint.

A small pack to carry your essentials during short day hikes and urban travel.

Maximum wash temperature of 40°C. Normal cycle.

Pack

Wide zipper opening and handle to easily grasp each bag

These specially-shaped bags were designed for storing and organizing belongings in your backpack.

Sports/

Sport Accessories/

Wellness & Recovery/

Care/

forclaz

Blister Protection Bandage