clearance

Storm protection.
3-layer membrane, 
25,000 Schmerbers.

Waterproof

29-cm (11”) side openings and component that wicks away perspiration (RET = 6).

Breathability

Lightweight

Stretch fabric (13% elastane) so you can move freely.

Freedom of movement

Drawstring at the jacket hem, adjustable sleeves with coverage, adjustable hood.

Anatomic design

2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket

Pockets

Lightweight, compressible fabric saves weight and space in your backpack.

Compact design

Designed to protect you during occasional hikes.

Maximum wash temperature of 30°C. Very delicate cycle.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Ventilation Zippers

Skill Level

Frequency

Season

Precipitation

Weather Conditions

sleeve length

Membrane Construction

Place of Practice

Windproof

Pocket

RECCO system

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Type of Length

Hood

Style

Schmerber

Main Material

Slim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. 
A warm layer, such as a fleece or a lightly padded jacket, can be worn underneath. 

Elastic drawstring and tightening toggle for easy adjustment. 
Integrated semi-rigid visor to provide high-level protection.
The small detail that makes the difference: a triangular opening on the side of the hood for better visibility.

Main component 

A product’s waterproof rating depends on two key criteria: component and construction. 
This product was made with a membrane.
The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof and breathable. 
It is flexible, lightweight, and breathable.

Membrane

3-layer design: The membrane is glued between the outer and inner fabric. We use it for durable, high-performing jackets.

Layer design

Laboratory tests are conducted to guarantee the waterproof rating of a component. We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. 
This product’s component has a 25,000-mm waterproof rating and can withstand the pressure of a 25,000-mm water column. 
This is equivalent to 25,000 Schmerbers.

Component waterproofing

We conduct laboratory tests that simulate rainfall to guarantee the jacket’s waterproof rating.  
This product was validated in a shower test under 18 cm of rain for 2 hours. This test reproduces the average conditions of a mountain storm.

Water resistance (jacket)

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: not very breathable fabric 
This product as a RET of 6.

A fabric is water-repellent when water slides off its surface without being absorbed. Because the fabric doesn’t soak up water, it remains lightweight and breathable.Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Water repellency can be reactivated by putting the item in the dryer for 10 minutes on low heat.
You can also use the waterproof spray (ref.: 8554908).

How to restore water repellency

This jacket optimizes the main component. This reduces its environmental impact. Reduced CO2 impact (by 31%) compared to the previous product.

We reduced this product’s environmental impact

Created in our international design centre at the foot of the Mont Blanc in France, this jacket is then manufactured by our suppliers in China and Vietnam.
We collaborate closely with these partners, who have specialist knowledge in manufacturing jackets. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.
By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment, and environmental protection.

Working conditions in our production workshops

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiast. It’s the perfect spot for designing our mountain hiking products.

Product design: our expertise

Jackets & Sweaters

Very warm hooded fleece jacket with a brushed component of density 380 g/sqm

Warmth

Quick-drying polyester mesh component. (RET = 14.47)

The cut provides great freedom of movement and flexibility.

Stretch

2 secure pockets to carry all your personal belongings

This fleece jacket is for occasional hikes in cold weather. The hood and warm pockets protect you from the cold.

Collar Type

Number of Pockets

Zipper Type

Grammage

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component traps air for natural insulation. This is exactly the same principle as animal fur and feathers.Cuffs provide extra protection against the cold.

Is my jacket warm enough for winter hikes?

Synthetic fleece performs like wool: warm with thermal insulation, yet still lightweight. Soft and comfortable, quick-drying and breathable.

What is the fleece material and why is it so warm?

We test for durability. For example, we verify that the fleeces do not pill, that colours do not run, and that repeated washing does not affect the fabric’s properties. The Martindale test measures a fabric’s abrasion resistance. A machine rubs a sample of the fabric on a reference surface with a weight at the end.

Is a soft, comfy material fragile?

With its wide fit and lightweight component, your fleece lets you move freely, which is essential when walking in the snow. The zippered pockets keep essentials safe and handy (e.g., tissues, lip balm, gloves, keys, and more). The hood makes this jacket ultra-warm for hiking in cold weather.

A comfortable, practical snow hiking jacket

Whatever your cold weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
Layer 2: A fleece or sweater to provide warmth and transfer moisture outward.
Layer 3: A parka to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for cold weather hiking

This product is guaranteed for two years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear or improper use.

How does my product warranty work?

Tops & Bottoms

Comfortable between 5°C and -5°C. Down with a fill power of 800 cuin.

Easily folds away into its left-hand pocket with a double-pull zipper.

Surface-treated outer fabric prevents water infiltration.

Water repellent

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

Abrasion resistance

This down jacket weighs approximately 430 g (15 oz.) in size L.

Weight

This down jacket keeps you warm during your cool weather hikes. Effective to -5°C for intense activity and 5°C for light activity.

Air Temperature

Condition

Pack

Worn as a third layer, this padded jacket has been certified for an active comfort temperature of -5°C during a standardized test in a thermal chamber. The model is wearing a synthetic, long-sleeved T-shirt and a light fleece underneath. Effective in simulated 5 km/h wind. 
We also tested this product in static mode: the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking:

- Thermal insulation, because of the air trapped in the down and feathers.
Ultra-lightweight: down is lighter than synthetic fill and provides the same warmth. This saves even more weight in your backpack.
- Ultra-compressible.

The advantages of duck down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches).
Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation.With an 85% down and 15% feather filling, this jacket has a guaranteed fill power of 800 cuin or more (international standard).

Measuring the fill power of down and feather wadding

A fabric’s water repellency is its ability to make water run off its surface without being absorbed.
This prevents the fabric from absorbing water and keeps it lightweight and warm. The fabric in this down jacket is water-repellent, although we recommend you wear a waterproof jacket over top in the rain. The fabric is made water-repellent by treating its outer surface, but the treatment can deteriorate with use. 
We recommend restoring it after each wash.

Water repellency (not to be confused with waterproofing)

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
 
In short: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Gentle spin cycle.

2. Tumble dry with 2 or 3 tennis balls and repeat 2 or 3 times until it is completely dry.

How to care for down jackets

Once you have cleaned your padded jacket, we recommend using a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water-repellent properties and optimizes its performance throughout its life cycle.

How do I reactivate the waterproofing properties?

Snags are common when hiking in a padded jacket. Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres escape. 
Not sure about repairing it yourself? Don’t worry! Our in-store workshops offer a repair service to mend your padded jacket with an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 70 g
S: 76 g
M: 81 g
L: 87 g
XL: 94 g
XXL: 100 g
XXXL: 112 g

Filling weight

Protects from a rain shower
2-layer coating
 5,000 mm/Schmerbers

18 cm (7”) side openings and component that wicks away perspiration (RET = 6).

Drawstring at jacket hem. Adjustable cuffs and hood.

2 zipped hand pockets with flaps, 1 zipped inside chest pocket.

Lining Material

Standard cut. The inner layer can be worn over a warm second layer such as a pullover or micro-fleece.

Elastic drawstring and tightening toggle for easy adjustment. 
Adjustable hook and loop tab strip at the back of the hood. 
A visor at the top of the hood protects your face.Removable hood.

2-layer component with coating and mesh lining (ventilated component).

A product’s waterproof rating depends on two key criteria: component and construction. 
This product was made with a coating. A coating is like a paint applied to the inside of the fabric to make it waterproof while remaining breathable. 
However, it requires a liner to protect it.

Coating

Laboratory tests are conducted to guarantee the waterproof rating of a component. We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. A component with a 5,000 mm waterproof rating can withstand the pressure of a 5,000 mm column of water. This is also equivalent to 5,000 Schmerbers.

We conduct laboratory tests that simulate rainfall scenarios to guarantee the jacket’s waterproof rating.  This garment was subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces average rain shower conditions in the mountains.

Jacket 
waterproofing

Component breathability is measured by thermal evaporative resistance (RET). 
This is the fabric’s ability to let perspiration escape during physical activity and prevent it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric
RET ≤ 20: not very breathable fabric 
This product was assessed at 12 RET.

A fabric is water-repellent when water slides over its surface without being absorbed. Because the fabric doesn’t soak up water, it remains lightweight and breathable.Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. The water repellency can be reactivated by putting the item in the dryer for 10 minutes on low heat.
You can also use the waterproof spray (ref.: 855490).

Created in our international design centre at the foot of the Mont Blanc in France, this fleece is then manufactured by our suppliers in Vietnam, Bangladesh, India, and Morocco. 
We collaborate closely with these partners who have specialist knowledge in manufacturing jackets. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

2,000-mm waterproof coating. 100% taped seams including zipped chest pocket. Hood

4 sealed pockets: 2 zipped hand, 1 watertight chest, 1 inner hook-and-loop fastener

Full-length zipper makes it easy to put on. Available in sizes S to 4XL.

Hydrophilic coating RET = 12: reduces condensation | Mesh lining

The NH 500 Hiking Waterproof Jacket was designed for regular hiking on lowlands, in the forest, or on the coast in rainy weather.

Closed Pocket

Ventilation

Playing Surface

   We use this process for the colours beige, navy blue, and black (codes 8650027 and 8785166).

This product reflects our commitment to consuming less water

Waterproof rating of 2,000 mm.
This jacket has been shower-tested at 60 L of water/m²/hr in 1 hour. It protects you from minor downpours, i.e., 6 cm of rain in one hour.
We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Waterproof material rated 2,000 mm can withstand the pressure exerted by a 2,000 mm column of water (roughly the equivalent of a two-hour shower).

Water resistance (fabric)

By recycling plastic bottles or used fabrics to produce our polyester, we reduce the use of petrol-based resources while maintaining the material’s quality and performance during hikes.
We use recycled polyester fibres on the blue (code 8731538) and on the red (code 8650029), as well as for the jacket lining in all colours.

Why choose recycled polyester?

The fabric of this jacket is water-repellent, i.e., water runs off its surface without being absorbed. This keeps the fabric from soaking up water so the jacket stays lightweight and breathable. A water-repellent treatment is applied to the exterior of the fabric. The main seams are also taped.

Fabric water repellency

Our fabric is extremely breathable – TER 12 
Breathability is measured according to the product’s thermal evaporative resistance. This refers to its capacity to release perspiration during activity. The lower the thermal evaporative resistance (RET), the higher the fabric’s breathability.

RET < 9 = extremely breathable 
RET < 12 = very breathable 
RET < 20 = breathable 
RET > 20 = slightly breathable to not breathable at all

Fabric breathability

We changed our water-repellent treatments to exclude perfluorocarbon (PFC) technologies.
PFCs make fabric water-repellent but are toxic to humans and the environment. By replacing PFCs with other technologies that deliver the same level of performance, we reduce our environmental impact.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) – with a hair dryer, moving back and forth from a distance of 20 cm (8”), twice
 – with an iron on the delicate setting and with the steam function off

How to maintain your jacket’s waterproof coating and long life

How much you perspire depends on the intensity and duration of your physical activity. If the fabric’s breathability is not right for your activity, perspiration will condense inside the jacket. Your clothing will feel damp. this is not rain coming through, but condensation caused by perspiration. It’s important to choose a jacket based on the type of physical activity you will be doing. This jacket is designed for the occasional one-day hike at a speed of 5 km/h (3 mph).

Choose your waterproof jacket according to the intensity of your activity. 

For full protection against wind and rain, we recommend the NH 500 Rain Overpants too.  

Other recommended products

2,000 mm-rated waterproof coating | Main seams taped | Hood

Closed pocket with zipper | The jacket folds away into its right pocket

Easy transport

Hydrophilic coating (RET = 12): reduces condensation under the rain jacket.

Hood adjustment | Zipper pull makes it easy to open with gloves

Ease of use

Light and compact rain jacket | Weight: 175 g in size L.

Eco-designed for your occasional hikes in the forest or on the coast. A backup solution in case of rain!

Duration

Wind

Tightening Type

Rain jacket fabric has a waterproof rating of 2000 mm
This jacket has been shower-tested at 60 L of water/m²/hr in 1 hr. It protects you from minor downpours, i.e., 6 cm of rain in one hour.
We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Waterproof material rated 2,000 mm can withstand the pressure exerted by a 2,000 mm column of water (roughly the equivalent of a two-hour shower).

Our fabric is extremely breathable – TER 12 
Breathability is measured according to the product’s thermal evaporative resistance. This refers to its capacity to release perspiration during activity. The lower the thermal evaporative resistance (TER), the higher the fabric’s breathability.

TER < 9 = extremely breathable 
TER < 12 = very breathable 
TER < 20 = breathable 
TER > 20 = slightly breathable to not breathable at all.

We changed our water-repellent treatments to exclude perfluorocarbon (PFC) technologies.
PFCs make fabric water-repellent, but are toxic to humans and the environment. By replacing PFCs with other technologies that deliver the same level of performance, we reduce our environmental impact.

This rain jacket has been designed for a two-hour hike at a pace of up to 5 km/h (3 mph), without elevation gain.
How much you perspire depends on the intensity and duration of your physical activity. If the fabric’s breathability is not right for your activity, perspiration will condense inside the jacket. Your clothing will feel damp. This dampness is not rain soaking through, but condensation caused by perspiration. You need to choose a rain jacket that suits your activity. 

For full protection against wind and rain, we recommend NH 500 rain pants too.  

Storm protection
2.5-layer membrane,
15,000 mm (Schmerbers)

Perspiration-wicking component (RET = 10).

Drawstring at jacket hem. Elastic cuffs. Adjustable hood.

Standard cut. The inner layer can be worn over a warm second layer such as a pullover or fleece.

Elastic drawstring and tightening toggle for easy adjustment. 
Adjustable hook-and-loop strip at the back of the hood. 
A visor at the top of the hood protects your face.

2.5-layer design: The membrane is glued beneath the outer fabric and protected on the inside with a thin film. We use it for lightweight jackets.

2.5-layer design: The membrane is glued beneath the outer fabric and protected on the inside with a thin film. This technique is used for light jackets.

Laboratory tests are conducted to guarantee the waterproof rating of a component. We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. 
This product’s component has a 15,000-mm waterproof rating and can withstand the pressure of a 15,000-mm water column. 
This is also equivalent to 15,000 Schmerbers.

We conduct laboratory tests that simulate rainfall to guarantee the jacket’s waterproof rating.  
This product was validated in a shower test under 12 cm of rain for 2 hours. This test reproduces average rain shower conditions in the mountains.

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: not very breathable fabric 
This product has a RET of 10.

By making polyester from plastic bottles, we have reduced the use of new oil-based resources while preserving the quality and performance of the material.

Created in our international design centre at the foot of the Mont Blanc in France, this jacket is then manufactured by our suppliers in Bangladesh. 
We collaborate closely with these partners, who have specialist knowledge in manufacturing jackets. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Brushed polyester fleece jacket with a density of 280 g/m2.

Back opening for moisture transfer
Quick drying polyester RET 11.06

Waterproof hood and panels (shoulders, sleeves, jacket hem).

Stretch side yokes for more freedom of movement during your activity

Made from 70% recycled polyester for effective product use.

Eco-design

Heading to the mountains? This fleece jacket is ideal for hiking in cold weather. Ventilation and stretch inserts provide good thermal comfort.

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: The knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. This is exactly the same principle as animal fur and feathers.Cuffs provide extra protection against the cold.

Thermal comfort is a balance between warmth and breathability. If moisture accumulates, you will feel the cold in less active phases. Designed for intense use, this fleece has a back opening and stretch side inserts that extend under the arms. A good balance between heat and ventilation for optimal thermal comfort.

Good ventilation for optimal thermal comfort.

In winter, protection from both moisture (snow, rain) and wind is important, because the latter can significantly cool the body. This fleece jacket has waterproof inserts on the shoulders, bottom of the sleeves, and hood. So, you can wear your jacket in damp weather or light snow showers.

How does my jacket protect me from the elements?

With a fitted cut and stretch inserts on the sides, your fleece allows for freedom of movement, essential when walking in the snow. The zipped pockets keep essentials safe and handy (e.g., tissues, lip balm, gloves, keys, and more). The waterproof hood and shoulders make your fleece jacket versatile—a cross between a second and third layer. A must for your winter hiking outfit.

This jacket is part of the ideal outfit for hiking off the beaten path: the SH 500 outfit. Your SH 500 Jacket, SH 520 Pants, SH 520 Boots, and SH 500 Snowshoes let you enjoy hiking on snow in all conditions. Travel light with the right gear.

The ideal snowshoeing outfit!

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
Layer 2: A fleece or sweater to provide warmth and transfer moisture outward.
Layer 3: A parka to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

Sportswear & Footwear/

Waterproof Clothing/

Rain Jackets/

Men's Rain Jackets/

forclaz

Trek 900 Trekking Softshell Windbreaker - Men