clearance

RDS down with a fill power of 660 CUIN. Comfortable between 0°C and -10°C. 

Warmth

Compact design

The outer fabric has a water repellent treatment to stop water getting inside.

Water repellent

This down jacket weighs approximately 380 g in size M.


Weight

Looking for a warm down jacket? This compressible down jacket is ideal for trekking comfortably down to -10°C.

Waterproof

Frequency

Pack

Weather Conditions

Hood

Main Material

Ethical down certified by RDS (Responsible Down Standard). Our traceability system guarantees the origin of the feathers in accordance with our commitment to use responsible materials. Our suppliers are committed to using only feathers that come from ducks bred for their meat and which are plucked after slaughtering.

sustainability.decathlon.com

What does the RDS* certification mean?


This 85% down / 15% feather down jacket has a guaranteed fill power equal or above 660 CUIN (European standard).The fill power is a measure of the down's thermal insulation capacity and its potential to "trap" air. So, down with a higher fill power (high CUIN number) will occupy more space, trap more air and provide greater thermal insulation.

Down/feather fill power

The durability and fill power properties of down give this jacket 3 qualities for hiking:
- The air trapped in the down and feathers provides thermal insulation
- Ultra low weight: down is lighter than synthetic wadding while offering the same degree of warmth. This saves even more weight in your backpack
- Ultra-compressible

What are the benefits of a duck down and feather filling?

The quilted jacket’s material is water repellent. This means that drops of water roll off the fabric, preventing them from soaking into the down jacket as quickly. But the down jacket is not waterproof. So we recommend wearing a waterproof jacket over the down jacket in the event of prolonged exposure to rain.

In case of rain

Some tips: close all the zippers on your down jacket and put it in the washing machine (synthetic cycle at 30°C). 
To preserve the fill power and warmth, put 2 tennis balls in the machine
NB: set a gentle spin cycle, as a fast spin cycle creates clumps that are difficult to break up.
Follow our advice by clicking the link below:
 

How to wash your feather down jacket

During washing, the down loses its loft. Tumble-drying is the best way to restore fill power. Put your down jacket in the dryer with two tennis balls. Run 2–3 drying cycles.
If you do not have a tumble dryer, you can completely dry your down jacket on a drying rack by turning it over and patting regularly.


How to dry my down jacket 

Over time, due to washing and wear and tear, the water-repellent treatment becomes less effective. 
This is how you can re-activate your padded jacket’s water repellency! 


Use the care product. Wash-in product for reactivating the water repellent properties


How to restore water repellency

XS: 117 g
S: 124 g
M: 130 g
L: 137 g
XL: 146 g
XXL: 157 g

Filling weight

Jackets & Sweaters

2,000 mm-rated waterproof coating | Main seams taped | Hood

One zipper pocket | The jacket can be stored in its pocket

Easy transport

Hydrophilic coating (RET = 12): reduces condensation.

Breathability

Protects against winds of up to 70 km/h (43 mph)

Windproof

Tightening hood | Pull on the zipper for easy opening

Ease of use

Lightweight, compact raincoat | Weight: 175 g (6 oz.) in size S-M

Lightweight

This Raincut jacket is designed to keep you dry on your hike in any weather. Our best-priced waterproof hiking jacket.

Ventilation Zippers

Precipitation

sleeve length

Membrane Construction

Pocket

type of waterproofing

breathability (in RET)

Type of Length

Style

Schmerber

The fabric for these overpants is water-repellent: water slides off its surface. This keeps the fabric from soaking up water, so it stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. In 2022, this model will be marketed with a more environmentally friendly water-repellent treatment.

PFC-free water repellency

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a tumble dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm (7 ¾”), twice
- by ironing on the delicate setting with the steam function off

Long-lasting performance

We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Waterproof material rated 2,000 mm can withstand the pressure exerted by a 2,000 mm column of water (roughly the equivalent of a two-hour shower).

Water resistance (fabric)

The fabric of this jacket is breathable: RET = 12. To find out whether a fabric is breathable, we test its total evaporative resistance (RET) based on the ISO 11092 standard. The lower the fabric’s resistance, the more perspiration can escape and the more breathable the fabric is. 
- RET < 9 = extremely breathable fabric 
9 < RET < 12 = very breathable fabric 
12 < RET < 20 = breathable fabric 
RET > 20 = little or no breathability

Fabric breathability

When playing sports, how much we perspire depends on the intensity and duration of the effort. If the fabric is not breathable enough, condensation from sweat can accumulate, making you feel damp. This is not rain coming through, but perspiration, so it’s best to choose a rain jacket suited to your activity. 

Choose your waterproof jacket according to the intensity of your activity. 

Wear the NH 500 Raincut Overpants to protect your lower body too. Then you’ll have complete and effective protection against wind and rain.
Plus, 

Other recommended products

Comfortable between -5°C and -18°C. 
Down with a fill power of 660 cuin.

Can be folded into its inner pocket to save space.

Completely water-repellent fabric. Waterproof panels on the shoulders and hood.

Reinforced at the shoulders and wrists to withstand friction.

Durability

Zippered air vents let excess body heat escape.

Ventilation

This down jacket only weighs 490 g (17 oz.) in size M.

This down jacket has a fill power of 660 cuin and thermobonded seams for hiking comfortably down to -18°C when active and -5°C when inactive.

Condition

Number of Pockets

Air Temperature

type of hood

thumb pass

This padded jacket, worn as a third layer, has been certified for a comfort temperature of -18°C during a standardized test in a thermal chamber.
The model is wearing a synthetic, long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h (3 mph) wind.

In our heat comparison tool, it represents 4 stars.

We have also tested this model in static mode; the comfort temperature is -5°C in this case.Heat-sealed compartments.

Thermal insulation.

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches).
Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation.
With an 85% down/15% feather filling, this jacket has a guaranteed fill power of 660 cuin or more (European standard).

Measuring the fill power of down and feather wadding

The durability and fill power properties of down give this jacket three qualities for hiking:
- The air trapped in the down and feathers provides thermal insulation.
- Ultra-low weight: down is lighter than synthetic wadding while offering the same degree of warmth. This saves even more weight in your backpack.
- Ultra-compressible.

The main stitching is heat-sealed to prevent feather loss.

Reducing the risk of feather loss

The quilted fabric is water-repellent. It allows water to slide off the fabric, keeping it dry while you get out of the rain. The shoulders and hood, which are more exposed to the rain, are waterproof. However, in the event of prolonged exposure to rain, wearing a waterproof jacket over the quilted jacket is recommended.

This down jacket can be worn all winter and will eventually need to be washed. 
  
In short: 
1. Machine wash with detergent specially formulated for down or technical garments at 30°C. Gentle spin cycle.

2. Tumble dry with 2 or 3 tennis balls and repeat 2 or 3 times until it is completely dry.

How to care for a down and feather jacket

Once you have cleaned your padded jacket, we recommend using a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water-repellent properties and optimizes its performance throughout the lifespan of your garment.

Waterproofing

Snags are common when hiking in a padded jacket. Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres escape. 
     

  Repairing a snag

XS: 144 g (5 oz.)
S: 152 g (5.3 oz.)
M: 159 g (5.6 oz.)
L: 170 g (6 oz.)
XL: 180 g (6.3 oz.)
2XL: 195 g (6.8 oz.)

200 g/m² fleece on the inside and outside insulates from the cold. High collar

Breathable, polyester knit fabric. Built-in zipper.

Two zipped pockets to safely carry your belongings.

Pockets

A thin micro-fleece that compresses perfectly at the bottom of a backpack.

Easy to care for

This low-cost, warm, and breathable fleece layer is a great choice in cool weather.

Skill Level

Collar Type

Grammage

Zipper Type

This fleece has a fitted, comfortable cut. Wearing a technical undergarment close to the skin is recommended for better protection against the cold. This fleece was designed to be worn under our windproof and waterproof jackets, such as the MH 100 Hiking Jacket.
Choose your usual size.


The brushed fleece component is designed to trap air; this air acts as a natural insulator, keeping the body warm. 

How does the material insulate you from the cold?

Two types of tests measure warmth:
- a material test 
- tests using a thermal mannequin in a thermal chamber We reproduce the temperature, wind (5 km/h), and humidity conditions encountered in the mountains during a 5 km/h hike.
These tests help us validate our design choices before field testing. 
This fleece has a comfort temperature between 7°C and 10°C (without a jacket over top).

How is warmth measured?

We make our polyester from plastic bottles, reducing the use of oil-based resources while preserving the material’s quality and performance.The white model is made from 100% recycled polyester and the grey model from 25% recycled polyester.

Why choose recycled polyester?

Textile dyeing requires a lot of water and produces wastewater from the dye baths. We use a bulk dyeing process that involves adding the colour pigments when manufacturing the thread to reduce the environmental impact. This dyeing process is used for our white and black models.

Our commitment to reduce water consumption

The aging of our hiking fleeces is tested to guarantee durability. We guarantee:
- resistance to wear from backpacks and moving arms to delay the appearance of pilling
- seam strength
- resistance to washing 
- colourfastness after washing and exposure to UV light and perspiration.

How is durability tested?

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie. 
This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect place to design quality hiking products.

Product design: our expertise.

Created in our international design centre at the foot of the Mont Blanc in France, this fleece jacket is manufactured by our suppliers in Vietnam, India, and Bangladesh.
We collaborate closely with these partners who have genuine expertise in fleece manufacture. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do your fleeces come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.
By conducting audits and having teams on site, we make sure that the working environment meets certain quality standards in terms of human respect, personal fulfilment, and environmental protection.

Working conditions in our production workshops

Tops & Bottoms

Comfort zone 5°C and -5°C. Good fill power (125 g/m²). Jacket hem drawstring

Easily folds away into its left-hand pocket with a double-pull zipper.

Surface-treated outer fabric prevents water infiltration.

Outer fabric 100% polyamide 39 g/m². 20 denier

Synthetic fabric and filling can be machine washed at 30°C.

This padded jacket weighs approximately 330 g in size M.

This padded and hooded hiking jacket offers warmth, light weight, and durability, for comfortable hikes in cool weather (as low as -5°C when active).

This padded jacket has been certified for a comfort temperature of -5°C during a standardized test in a heat chamber. The model was wearing a synthetic long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h wind. 

In our heat comparison tool, this represents 2 stars.

Thermal insulation and warmth

- Inside flap under the zipper protects you from the wind.

- Elasticized cuffs.
- Collar flap protects the chin
- Tightens with an elastic cord and toggle at the hem.

- Hood with elastic bias binding

Features

We use 100% polyester filling (70% recycled) weighing 125 g/m² for the torso and 150 g/m² for the sleeves and hood. Our fill is made from silicone-coated spiral fibres for excellent compression and durability. Despite its thinness, the trapped air makes the filling highly insulating.

It stays warm even when wet.

Technical information

This polyamide canvas uses 20 denier threads (thread unit of measurement) and resists up to 20,000 abrasion cycles. Durability is calculated using the Martindale test, Standard 12 947-2. This test consists of rubbing the jacket’s material against another material to see how well the product resists wear. 
Exterior: 100% polyamide fabric 39 g/m², 20 denier
Lining: 100% polyamide fabric 35 g/m², a mix of 15 and 20 denier threads

Durable materials

A fabric’s water repellency refers to its ability to shed water from its surface before it gets absorbed.
This prevents the fabric from absorbing water and keeps it lightweight and warm. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime (recommended after each wash). Water repellency-restoration products are available in our stores.

Water repellency (not to be confused with waterproofing)

Once you clean your padded jacket, we recommend a water-repellent reactivator spray to preserve the outer fabric’s hydrophobic properties. This renews the fabric’s water repellent properties and optimizes its performance throughout its lifespan. Look for this product in store and on our website using code 8554908

Water repellency restoration

Our water-repellent treatment contains no PFCs (perfluorocarbons).

PFCs make fabric water-repellent, but are toxic to humans and the environment. By replacing the PFCs with other technologies that we are currently developing to achieve the same level of performance, we help reduce this environmental impact.

What is a PFC-free water-repellent treatment?

The fabric we use reduces CO₂ emissions by 40%.
The lining is innovative; it weaves dope-dyed black yarn together with undyed yarn. Compared to a classic dyeing process, this method reduces:
•	fine particulate emissions (PM2.5) by 66%
•	Fresh water eutrophication by 74%
•	sea water eutrophication by 68%

Do you know why the lining of your padded jacket is grey?

Dyeing textiles uses lots of water, chemical products, and energy. However, we still enjoy wearing colour. To reduce our impact, we use the dope dyeing, a technique where colour pigments are added when the yarn being produced (not soaked in dye baths as usual). This reduces water consumption and wastewater from fabric dyeing operations.

We reduced the environmental impact by dyeing the threads before weaving them.

In general, it’s best not to wash a down jacket too often. Each wash lowers its thermal properties.

Valuable advice for improving your padded jacket’s durability!

Sometimes a padded jacket gets torn on the trails. Good news! It can be repaired! Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres to escape.

Not sure about repairing it yourself? Don’t worry! Our in-store workshops offer a repair service for your padded jackets.

Does your down jacket have a snag? How to repair it

The product’s environmental impact is calculated over its entire life cycle using various indicators. An ABCDE rating shows the environmental impact of a product taking into account its production, transportation, usage, and end-of-life waste generation. Decathlon displays this information voluntarily to help you identify products with a lower environmental impact. Learn more at sustainability.decathlon.com 

Our products’ environmental impact

Fleece (200 g/m²) on the inside and outside insulates from the cold. High collar.

Breathable polyester knit fabric. Built-in zipper.

This fleece has a fitted, comfortable cut. Wearing a technical base layer is recommended for better protection against the cold. This fleece was designed to be worn under our windproof and waterproof jackets, such as the MH 100 Hiking Jacket.

Choose your usual size. 

The brushed fleece component is designed to trap air, providing natural heat retention. 

We make our polyester from plastic bottles, reducing the use of oil-based resources while preserving the material’s quality and performance.

Two types of tests measure warmth:
- a material test 
- a test on a thermal dummy in a thermal chamber We reproduce the temperature, wind (5 km/h), and humidity conditions encountered in the mountains during a 5 km/h hike.
These tests help us validate our design choices before field testing. 
This fleece has a comfort temperature between 7°C and 10°C (without a jacket over top).

Wear on our hiking fleeces is tested to guarantee durability. We guarantee:
- resistance to wear from backpacks and arm movements to delay pilling, specific to this material
- the strength of seams
- resistance of the fleece material after three washes (size stability)
- the material retains its colour after washing and exposure to UV and perspiration

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie. 
This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect place to design quality hiking products by applying our full expertise.

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured and assembled by our suppliers in Vietnam, India, and Bangladesh.
These are partners that have genuine expertise in making our fleeces and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our fleeces come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.
By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment, and environmental protection.

Comfortable between 5°C and -5°C. RDS ethical down with a fill power of 800 cuin.

Folds away into its left side pocket using a double-pull zipper

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

Abrasion resistance

This down jacket weighs approximately 275 g in size M.


This down jacket keeps you warm during your cool weather hikes. Effective to -5°C for intense activity and 5°C for light activity.

Worn as a third layer, this padded jacket has been certified for an active comfort temperature of -5°C during a standardized test in a thermal chamber. The model is wearing a synthetic, long-sleeved T-shirt and a light fleece underneath. Effective in simulated 5 km/h wind. 
We also tested this product in static mode: the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking:

- Thermal insulation, because of the air trapped in the down and feathers.
Ultra-lightweight: down is lighter than synthetic fill and provides the same warmth. This saves even more weight in your backpack.
- Ultra-compressible.

The advantages of duck down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches).
Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation.With an 85% down and 15% feather filling, this jacket has a guaranteed fill power of 800 cuin or more (international standard).

Inflating power of down/feather filling

A fabric’s water repellency is its ability to make water run off its surface without being absorbed.
This prevents the fabric from absorbing water and keeps it lightweight and warm. The fabric in this down jacket is water-repellent, although we recommend you wear a waterproof jacket over top in the rain. The fabric is made water-repellent by treating its outer surface, but the treatment can deteriorate with use. 
We recommend restoring it after each wash.

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
  
In short: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Gentle spin cycle.

2. Tumble dry with 2 or 3 tennis balls and repeat 2 or 3 times until it is completely dry.

How to care for down jackets

Once you have cleaned your padded jacket, we recommend using a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water-repellent properties and optimizes its performance throughout its life cycle.

How do I reactivate the waterproofing properties?

Snags are common when hiking in a padded jacket. Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres escape. 
Not sure about repairing it yourself? Don’t worry! Our in-store workshops offer a repair service to mend your padded jacket with an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 70 g 
S: 75 g 
M: 81 g 
L: 87 g 
XL: 94 g
XXL: 100 g

The 5,000-mm coating will protect you even in a downpour.

20 cm (7 ¾”) side openings and perspiration-wicking component (RET = 12).

Removable, adjustable hood. Removable and adjustable hood, adjustable cuffs, tightening cord at the hem.

Anatomic design

2 zippered hand pockets and 1 zippered inside pocket for your belongings.

This low-cost waterproof jacket was developed for occasional hikes.

Jacket Type

Season

Place of Practice

Lining Material

The feminine cut of this jacket suits different body types. You can wear a warm layer underneath, such as a fleece jacket or light sweater. The inner lining also improves comfort. 
You can choose your usual size or one size up if you want a looser fit.

Detach the hood using the snaps. Adjust its height using an elastic cord and adjust the depth with the hook-and-loop tab at the back.

This jacket is made with 2 coated layers, including a large mesh lining. 
That means the jacket has an outer fabric and a lining. 
A coating similar to resin is applied to the inside of the fabric, making the material waterproof yet breathable. The jacket’s inner lining protects this coating.

Jacket composition

We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. 
The component of this product has a waterproof rating of 5,000 mm: it can withstand the pressure exerted by a 5,000-mm column of water. This is also equivalent to 5,000 Schmerbers.

Sports/

Outdoor/

Hiking/

Tops & Bottoms/

forclaz

MT 50 Hiking Jacket - Women