2,000 mm-rated waterproof coating | Main seams taped | Hood

Waterproof

One zipper pocket | The jacket can be stored in its pocket

Easy transport

Hydrophilic coating (RET = 12): reduces condensation.

Breathability

Protects against winds of up to 70 km/h (43 mph)

Windproof

Tightening hood | Pull on the zipper for easy opening

Ease of use

Lightweight, compact raincoat | Weight: 175 g (6 oz.) in size S-M

Lightweight

This Raincut waterproof jacket is designed for your occasional hikes in the rain.

Ventilation Zippers

Frequency

Precipitation

sleeve length

Membrane Construction

Pocket

type of waterproofing

breathability (in RET)

Type of Length

Hood

Style

Schmerber

Main Material

The fabric for this jacket is water-repellent: water slides off its surface. This keeps the fabric from soaking up water so that the jacket stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free.

PFC-free water repellency

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm (8”), twice
- with an iron on the delicate setting and with the steam function off

Long-lasting performance

Rain jacket fabric has a waterproof rating of 2,000 mm.We measure a fabric’s resistance to water pressure in terms of water column height in mm (ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Waterproof material rated 2,000 mm can withstand the pressure exerted by a 2,000 mm column of water (roughly the equivalent of a two-hour shower).

Water resistance (fabric)

The fabric of this jacket is breathable: RET = 12.To find out whether a fabric is breathable, we test its total evaporative resistance (RET) based on the ISO 11092 standard. The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
- RET < 9 = extremely breathable 
- 9 < RET < 12 = very breathable 
- 12 < RET < 20 = breathable 
- RET > 20 = little or no breathability

Fabric breathability

This rain jacket was designed for a 2-hour hike at a maximum pace of 5 km/h (3 mph), with no ascent.How much you perspire depends on the intensity and duration of your physical activity.If the fabric’s breathability is not right for your activity, perspiration will condense inside the jacket.The jacket will feel damp inside.This dampness is not rain soaking through, but condensation caused by perspiration.You need to choose a rain jacket for your activity. 

Choose your waterproof jacket according to the intensity of your activity. 

Wear the NH 500 Raincut Rain Pants to protect your lower body, too. Then you’ll have complete, effective protection against wind and rain.
Plus, the rain pants are also eco-designed using bulk dope dyeing.

Additional product recommendations

Jackets & Sweaters

Waterproof to a depth of 2 metres for 30 hour (IPX8 standard).

Watertight

Allows for touchscreen use out of the water.

Tactile efficiency

Easy opening/closing

This watertight pouch is designed to protect your phone during water sports.

Maximum wash temperature 95°C. Normal cycle.

Maximum wash temperature 70°C. Normal cycle.

Skill Level

Slide the clip. 
Open the pouch. 
Insert your phone. 
Seal the pouch. 
Slide the clip until you hear a click.

Check the bag’s watertightness regularly using paper towel.

How it works

On dry land: 
Your phone’s touchscreen is functional. You can still make calls, take pictures, and read your screen. 
Note: Picture quality is reduced.

Underwater: 
The touchscreen won’t work underwater.
You can’t take pictures.

Phone functions

Dimensions
Width: 110 mm
Height: 210 mm
Thickness: 8.5 mm

Weight: 40 g

Maximum dimensions of phone:
Width: 90 mm
Height: 160 mm

Technical dimensions

Regularly check the pouch’s waterproofness. A dent or small puncture can damage the seal.
Slip the pouch under your UV top, T-shirt, or life jacket while you’re on the water.
During high-speed activities (jet skiing, kite surfing, etc.), protect it from the wind by keeping it in your wetsuit, for example.

Directions

Waterproof Bags

clearance

Foam back - 2 pads | Foam straps | 2 thumb loops | Chest strap

Carrying comfort

1 compartment | 5 pockets: 2 zippered, 2 bottle holders, 1 divider (15” laptop)

Pockets

Volume: 20 L (4.5 gal) | Weight: 470 g (9.5 oz.) | Dimensions: 47 x 25 x 14 cm (18.5” x 10” x 5.5”)

Capacity

Carry the bag horizontally when hiking for easy access to the outside pocket

Side compression straps effectively distribute the load

Stability

Durable, abrasion-resistant components and assemblies | 10-year warranty

Abrasion resistance

2 vertical pads on the back for ventilation

Ventilation

Eco-design

Our team of hikers has designed this NH100 20-litre rucksack for use during your occasional walks in lowlands, forests, and the coast in dry weather.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Ironing at a maximum iron soleplate temperature of 200°C.

Volume (L)

Options

Duration

Weight (g)

Number of Pockets

Number of Compartments

Fastener Type

The volume of each backpack is measured using a standardized method: the main compartment and all the pockets are filled with little balls. These balls are then emptied into a graduated container to get the equivalent volume in litres.

How is volume measured?

- Loosen all the straps (shoulder straps, belt, load adjusters)
- Put on the backpack
- Tighten the shoulder straps
- Adjust the load adjuster straps as needed

How to adjust your backpack

Put heavy items at the bottom. Pack your clothes around these items.
Keep your waterproof jacket and/or fleece in an easy-to-access location.
Place small, frequently used items in the pockets (sunscreen, map, glasses, etc.). Put your water bladder in the compartment provided along the back and water bottles in the external pockets.

How to pack your backpack

The backpack’s components are validated in the lab: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness when subjected to UV light and washing, and waterproofing. We also check the resistance of its construction using a dummy that reproduces a hiker’s movements to replicate several years of wear and tear.

Tested for durability and optimal resistance

Thanks to your feedback, we have improved the design of our NH 100 20-L (4.5 gal) backpack.
The main zipper on this new backpack has been improved so it’s easier to open. We have also added a compartment and a zippered pocket in the main pocket.

Your opinion is important to us!

Hiking Backpacks and Travel Bags

40 lm | Recommended to provide light for 1 person.

Power

50 hours of full-power battery life (40 lm)

Autonomy

Single switch, single lighting mode | Built-in loop for hanging

IPX4 rated lamp: withstands rain in all conditions

The lamp is 4 cm high and 7 cm in diameter.

Compact design

Weight

This lamp was designed to provide enough light for one person. For use outdoors or in tents for camping or bivouacking.

Lighting Type

reflective

Number of Users

Hook Type

Power Type

Supply type

This lamp was designed for use:
- laid flat
- by detaching the loop to fix it on the second attachment point and create a small buckle Hang it on a branch or on a tent hook (which fits in the hole on the tongue), or place it on the side of your table.
The shape and size make it easy to hold. Backup lighting on a short trip.

Recommended use

This small lamp provides good lighting in the evening or during the night for: eating, reading, or looking through your belongings. Light loses brightness as batteries lose their charge.

Light comfort

During its development, we have worked to make the new BL 40 Camping Lamp 100% recyclable at the end of its life.
- We use one single material for the (white) light diffusion part and the battery case to make recycling easier
- No welding (easy to separate and recyclable)
- 100% recyclable TPE rubber
We have achieved a 6% reduction in CO2 impact: Eventually, our goal is for this product to be eco-designed.

Our environmental approach

Headlamps & Lighting

Padded belt to carry on the hips, wide adjustable straps. Thumb loop.

Very well ventilated back (AirCooling label) that regulates back perspiration.

Volume: 20 L/Dimensions: H 56 cm, W 26 cm, D 18 cm
Suitable as carry-on luggage

Pockets:1 exterior, 1 interior
1 water compartment
2 mesh pockets
1 belt pocket

Multiple compartments

The main compartment has a front opening to access the bottom of the bag.

The backpack has a ventilated back, and the waist strap makes it comfortable to carry. Includes a 3 L top pocket and smartphone pocket on the front of the belt.

Condition

Frame

Bag Type

Place of Practice

Abrasion-resistant for durability
Tests performed on the components, seams, and finished product to simulate aging. 
These results guarantee that the bags are good to go for 10 years from the date of purchase.

10-year warranty.

Our products are perfect for your mountain hikes. 
Over time, they will age, and some parts can wear or break.
To make repairs easier, we sell tightening buckles and chest clips that are compatible with your bag. Don’t throw away, repair!

Don’t throw it away, fix it!

There is a compartment in the bag to place a water bladder as well as a hole to let the tube out.
The water bladder is not included, but you can buy a 1, 2 or 3 litre one in store.

Water bladder

Our model comes with a detachable front pocket. Depending on your body shape, it can be really useful to move your pocket to the front using the rip tab to make it accessible. Plus, it won’t annoy you on the sides when hiking.


Tip: Detachable front pocket

Not waterproof. If you want to protect your belongings from the rain, you can buy a 20 to 40 L rain cover, available on our website (reference 8734213).

Waterproofing

When you are travelling by plane, the authorized carry-on luggage size is 55 x 35 x 25 cm maximum. This can vary depending on the airline. 
This bag can be used as carry-on luggage as long as you don’t load the top too much.

Carry-on baggage

1 - Loosen all the straps (shoulder straps, belt, load adjuster straps). 
2 - Put the backpack on. 
3 - As this bag is small in volume, put the belt around the waist and tighten it. 
4 - Tighten the shoulder straps. 
5 - Adjust the load adjuster straps as needed

How to adjust the backpack



Put your bedding at the bottom. Place heavy equipment against your back. Pack your clothes around these items. Keep a waterproof and/or fleece jacket at hand. Place small frequently used items in the pockets (sunscreen, map, glasses, etc.). The water bladder can be placed in the compartment generally provided down the back.

How to pack a backpack

We recommend handwashing your backpack. Use soapy, lukewarm water and focus on the areas in contact with the body (shoulder straps, back, and belt), using a brush if needed. 
This is the best way to maintain the fabric’s properties, particularly the waterproofing. 
Rinse well with lukewarm water and dry away from heating sources and sunlight. Store in a dry place.

How to care for and wash your backpack

To help preserve our natural playground, Quechua is committed to limiting the environmental impact of its products.  
We are working to ensure that, one day, this backpack will be 100% responsible: eco-design, repairability, and sustainability are at the heart of our developments.

Wide zipper opening and handle to easily grasp each bag

Two different colour bags make identifying your belongings easy.

Fit perfectly inside 40 to 60 L backpacks

Compatibility

These specially-shaped bags were designed for storing and organizing belongings in your backpack.

Polyester main envelope
Mesh window to see contents and let belongings breathe

Construction

Weight of one bag: 50 g
Weight of the set: 120 g

Dimensions

onlyonline

Stretch fabric (2% spandex) and loose fit

Freedom of movement

4 pockets | 1 thigh pocket (hook-and-loop tab) | 2 hand pockets | 1 rear pocket

Main component contains 79% organic cotton.

Softness

Regular fit | Available from size S to 3XL

Anatomic design

Belt with wide loops | Press stud fastening

User comfort

The main fabric contains small quantities of polyester to wick away moisture

Quick drying

Designed for occasional hikes on easy trails.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Weather Conditions

The pant material makes them pleasant to wear between seasons or in summer, as it is not too hot.

Three-season pants

The pant material contains spandex. If you are between two sizes, choose the smallest of the two. After washing, the pants may seem a little tight. However, they will loosen after use (like a pair of jeans with spandex).

Our advice for choosing your size

The fabric of these pants contains 79% organic cotton.
We began using organic cotton in 2006, a market that currently represents just 0.4% of worldwide cotton production. The cotton is grown without chemical fertilizers or pesticides. It protects biodiversity, soil fertility and reduces the risk of groundwater pollution. This is still not enough and that’s why we are working to make this product eco-designed.

Thanks to all your feedback, we have improved the concept and design of the NH 100 pants. The stretch component of this new model increases your freedom of movement. We also improved comfort (softness of cotton, width of the waistband) and drying speed (synthetic component). Finally, we also took into account your feedback on the depth of the pockets and the cut of the pants.

Tops & Bottoms

2-year guarantee. Combines heavy duty material and reinforced components.

Can contain up to 2 L. The fanny pack weighs 45 g when empty.

The fanny pack occupies very little space when folded.

1 large main compartment + 1 zipper pocket on the outside.

The fabric is dope-dyed, a process that requires very little water.

This compact fanny pack was designed to carry your essentials on daylong outings.

Volume

Pack

Waterproof material to hold or carry wet belongings.

Designed for swimmers needing to carry wet belongings or protect items from the water.

This pouch is not watertight: it will not provide total protection in the event of immersion in water.

- Width: 17 cm 
- Height: 30 cm 
-Depth: 6 cm

Cross-Body Pouches

1 main compartment with a double zipper | 1 deep outer compartment

Volume: 10 L | Weight: 145 g | Dimensions: 39 x 21 x 12 cm

Shift the bag to one side when hiking for easy access to the outside pocket.

The  NH 100 10 L backpack is perfect for all kinds of hikes, whether in the field, forests or coastline.

 
 1. We don’t dye the interior fabric.
   ).

We use a standardized method to measure the volume of each backpack: the main compartment and all the pockets are filled with small balls. The balls are then emptied into a graduated container to determine the equivalent volume in litres.

1 - Loosen all the straps (straps, belt, and load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

Place heavy items at the bottom. Pack clothing around these items. Keep your waterproof jacket and/or fleece in an easy-to-access location. Place small, frequently used items in the pockets (sunscreen, map, glasses, etc.). 

These components were validated through laboratory tests: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness when subjected to UV light and washing, and waterproofing. We also use a dummy to reproduce several years’ hiking movement to check for resistance to wear and tear.

Sports/

Sport Accessories/

Monitoring/

Earbuds and Smartphone Accessories/

triban

100 Waterproof Smartphone Sleeve