Wide opening and Spider system for greater ease of use.

Ease of use

Lightweight

Its orange colour makes it easy to identify on a harness.

Visual efficiency

Its round, pear-shaped body (HMS) and Spider fastening allow for use in all situations (relays, etc.) without snagging.

Type of Snap Hook

Carabiner Shape

Gate Opening

Total weight

Major axis, gate closed: 21 kN
Major axis, gate open: 6 kN
Minor axis: 9 kN

Durability

Standards/Certification

Gear

Breaking resistance

Red visual indicator is visible when carabiner is open.

Easy opening/closing

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

Anti-Cross-Loading

Strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

Technical features

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

Guidelines for use

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

Certification

Wide opening makes it easier to run rope and belay devices through.

BLC system for attaching carabiner to harness tie-in loop in line of major axis.

This screwgate carabiner is designed for hooking a belay system up to a harness when climbing or mountaineering.

Strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

Attaches to a plate, don't forget to close sleeve before anchoring

Our climbers have designed this quick link for use in climbing, big wall climbing use.

Excellent weight distribution thanks to wide, very dense EVA foam pads.

User comfort

4 buckles for a better fit and good centring of the tie-in loop.

Versatility

Weight

Reinforced upper and lower tie-in loops: better wear-resistance.

Robustness

Our instructors and climbers designed this harness to give you the highest level of comfort and versatility, wherever you climb.

Maximum wash temperature 95°C. Normal cycle.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Skill Level

Thigh Adjustment

Waist Belt Adjustment

GEAR LOOP

EASY ON/OFF

Fully adjustable.
 The advantage is that it adapts to fit all body shapes as well as clothes made for various activities (shorts, tights, trousers, overtrousers, etc.).
Sizes:2 buckles
Leg loops: 2 buckles

Available in 2 sizes

ADJUSTMENT

Size S to M: 
Waist size: 70-95cm (28" to 37")
Thigh sizes: 48-58 cm (19" to 23")

Size L to XXL:
Waist size: 84-117cm (33" to 46")
Thigh sizes: 57-67 cm (22" to 26")

SIZING TIPS

We recommend that you wash your harness in warm soapy water (pH neutral) at 30°C maximum. Rinse thoroughly with tap water (do not use a high pressure water jet).
Dry your harness on a drying rack. Do not tumble dry.

CARE INSTRUCTIONS

Shoes & Harnesses

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Bags & Ropes

Keylock locking mechanism makes it easier to use

Our team of climbers designed this snap hook for hooking up a belay system to a harness or for climber safety during rope manoeuvres.

Breaking strength:
Major axis:  30 kN
Minor axis: 10 kN
Open gate: 10 kN

TECHNICAL FEATURES

The karabiner must be cleaned with fresh water and dried away from a heat source. Do not use any chemicals.
For further details, refer to the user guide.

Store the karabiner in a dry, cool, well ventilated place, away from UV rays and chemicals.
For further details, refer to the operating instructions.

STORAGE ADVICE

Carefully read the instructions before using.

DIRECTIONS FOR USE

Keylock® System. Bent and straight gate.

This carabiner was designed for making a quickdraw or attaching an accessory to your harness.

New patented system for gate opening / closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Strength:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

For a single rope only, from 8.5 to 11 mm.

The new design allows for excellent control of descent.

Ease of learning

For lead climbing or top roping, first or second climbers, and abseiling on a single rope.

Wide opening to make it easier for rope and belay device to run through.

Karabiner with auto-locking sleeve, open single handedly, and closes by itself.

Our climbing team designed this carabiner to connect a belay system to a harness for climbing and mountaineering.

Breaking strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

Sports/

Outdoor/

Climbing/

Gear/

simond

HMS Auto-Locking carabiner - Goliath Black