Wide opening and Spider system for greater ease of use.

Ease of use

Lightweight

Its orange colour makes it easy to identify on a harness.

Visual efficiency

Its round, pear-shaped body (HMS) and Spider fastening allow for use in all situations (relays, etc.) without snagging.

Type of Snap Hook

Carabiner Shape

Gate Opening

Total weight

Major axis, gate closed: 21 kN
Major axis, gate open: 6 kN
Minor axis: 9 kN

Durability

Standards/Certification

Gear

Breaking resistance

Red visual indicator is visible when carabiner is open.

Easy opening/closing

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

Anti-Cross-Loading

Strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

Technical features

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

Guidelines for use

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

Certification

Wide opening makes it easier to run rope and belay devices through.

BLC system for attaching carabiner to harness tie-in loop in line of major axis.

This screwgate carabiner is designed for hooking a belay system up to a harness when climbing or mountaineering.

Strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

Highly resistant to repeated folding and high levels of friction.

Abrasion resistance

Elastic cordelette to really bite into narrow ropes.

Compatibility

Impact protection

Extremely lightweight—30 g compared to mechanical systems.

Weight

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Maximum wash temperature 95°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Maximum wash temperature 70°C. Normal cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Weight:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

Diameter:

Reduced volume for a minimal space requirement in the harness.

Compact design

Breaking strength of 2200 daN (kg) greater than that of a strap knot.

Available in 3 sizes easily identifiable by colour code-60/120/175cm

Flat strap rings, light and compact for minimal space requirement.Ideal for multiple uses in mountaineering, climbing and all vertical sports

Diameter

Rope Length (cm)

Attaches to a plate, don't forget to close sleeve before anchoring

Our climbers have designed this quick link for use in climbing, big wall climbing use.

Excellent weight distribution thanks to wide, very dense EVA foam pads.

User comfort

4 buckles for a better fit and good centring of the tie-in loop.

Versatility

Size S to M: 420 g (15 oz.)
size L to XXL: 460 g (16 1/4 oz.)

Reinforced upper and lower tie-in loops: better wear resistance.

Robustness

Our instructors and climbers designed this harness to give you the highest level of comfort and versatility, wherever you climb.

Skill Level

Thigh Adjustment

Waist Belt Adjustment

Gear holder

Easy on/off

Fully adjustable.
 The advantage is that it adapts to fit all body shapes as well as clothes made for various activities (shorts, tights, pants, over pants, etc.).
Sizes:2 buckles
Leg loops: 2 buckles

Available in 2 sizes

Adjustment

Size S to M:
Waist size: 70 cm to 95 cm (27" to 37")
Thigh sizes: 48 cm to 58 cm (19" to 23")

size L to XXL:
Waist size: 84 cm to 117 cm (33" to 46")
Thigh sizes: 57 cm to 67 cm (22" to 26")

Sizing tips

We recommend washing your harness in warm, soapy, pH neutral water at 30°C maximum. Rinse thoroughly with tap water (do not use high water pressure).Dry your harness on a drying rack. Do not tumble dry.

Care instructions

CE-certified product according to EN 12 277+A1 2018

Shoes & Harnesses

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Bags & Ropes

Keylock locking mechanism makes it easier to use

Our team of climbers designed this snap hook for hooking up a belay system to a harness or for climber safety during rope manoeuvres.

Breaking strength:
Major axis:  30 kN
Minor axis: 10 kN
Open gate: 10 kN

TECHNICAL FEATURES

The karabiner must be cleaned with fresh water and dried away from a heat source. Do not use any chemicals.
For further details, refer to the user guide.

CARE INSTRUCTIONS

Store the karabiner in a dry, cool, well ventilated place, away from UV rays and chemicals.
For further details, refer to the operating instructions.

STORAGE ADVICE

Carefully read the instructions before using.

DIRECTIONS FOR USE

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Keylock shape and flat tint on the carabiner for easier handling.

This versatile quickdraw is designed for climbing and mountaineering.

New patented system for gate opening / closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Carabiner:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

Strap
Length: 11 cm (4 1/3")
Width: 16 mm (2/3") 

Quickdraws should be cleaned with fresh water and dried away from a source of heat. Do not use chemicals.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the quickdraw in a dry, cool and ventilated place, away from UV and chemicals.
For more details, refer to the instructions for use.

Storage and transport

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018
The straps are certified   EN 566: 2017

Can hold a maximum of 900 kg without breaking.

Eco-design

Ideal for securing accessories when climbing or mountaineering.

A lightweight, low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Rope Length (m)

Static strength:

- Please note that this cord is static
- It should only be used as a backup for climbing, mountaineering, caving, or working at height.
- It will not absorb energy.
- It should not be used as a belay rope.

Restrictions of use:

Standards/certification

onlyonline

Features teeth on the side for easy setup on the rope

For an 8.9 mm (1/3") by 11 mm (2/5") single rope or a 7.5 mm (1/4") by 9 mm (1/3") half rope.

Single belaying/abseiling system, intended for indoor climbing or rock climbing activities.

This belay has 2 V-shaped brake grooves to slow the climber's descent.

Braking principle

If the system is dirty, clean it with fresh water and dry it away from heat sources. Do not use chemical products.
For more details, refer to the instructions for use.

Store the system in a dry, cool, and ventilated place, away from UV rays and chemicals.
 For more details, refer to the instructions for use.

Product in line with the standard EN 15151 -2 2012 and UIAA 129

Ventilation

ABS shell construction protects helmet from everyday scratches

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Style

Detachable Visor

Fastener Type

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Wide opening to make it easier for rope and belay device to run through.

Karabiner with auto-locking sleeve, open single handedly, and closes by itself.

Our climbing team designed this carabiner to connect a belay system to a harness for climbing and mountaineering.

Breaking strength:
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN

Sports/

Outdoor/

Climbing/

Gear/

simond

HMS Auto-Locking carabiner - Goliath Black