100 g/m² insulation. Warm, soft, brushed knit lining.

Warmth

Very good: 10,000 mm membrane, 100% taped seams on the buttocks. Ankle gaiters

Waterproof

Patented PNF system: adjustable leg length up to 12 cm.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Label on the lining for writing your child’s name.

Customization

These ski pants were designed to accompany kids both in their skiing progress and their growth. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Condition

Frequency

reinforced area

Number of Pockets

belt height

reflective

Type of Brushing Boots

Weather Conditions

Place of Practice

modular

Stitching Type

Windproof

Pocket

RECCO system

Type of Length

Type of Bell

Schmerber

With Straps

Main Material

The innovative Pull’n Fit concept makes it easy to adjust the leg length of the ski pants so that they adapt perfectly to your child’s body shape. With the new Pull’n Fit system, say goodbye to pants that are too short or too long! Simply pull up the zippers to shorten them!

Pull’n Fit Zip system

Thermal insulation will keep your young skiers at just the right temperature. This garment adapts to the body’s movements and to the outside environment. Wedze uses wadding for insulation to keep the body warm. 
Wadding is a synthetic component made from polyester that stores more or less air, depending on the length of the fibres. The thicker the wadding, the more air it contains and the warmer it is.

Thermal insulation

The membrane is a very thin component applied to the inner surface of the outer fabric. This component prevents moisture from seeping in (snow, rain, etc.) while allowing perspiration to escape.

Membrane

In addition to waterproof fabric, taped seams make these pants even more watertight. Waterproof adhesive strips taped to the inside seams make these pants fully watertight. These taped seams are in the areas most exposed to snow. On these pants, this means the seat.

Taped main seams

Water repellency is a material’s ability to let water bead off the surface without being absorbed. The water-repellent features of these pants improve their resistance to bad weather. The exterior surface of the fabric is treated to make it water-repellent. However, this property may deteriorate with use.

Water repellency

Because sharp skis can sometimes damage or cut the lower parts of ski pants, Wedze has integrated high-performance reinforcements to prevent tearing to the maximum.

Durability

A label at the top of the lining allows you to write your child’s name. Practical for finding their pants after ski class or at school.

To keep your legs warm and dry, two layers of clothing are enough:
- One base layer to wick away perspiration 
- One pair of ski pants to protect against the elements and provide warmth

How should you dress kids so their legs don’t get cold on the slopes?

Kids' & Babies' Winter Clothing

clearance

Waterproof membrane, water-repellent outer fabric.

Elastic tightening system at the wrist. Wide cuffs.

These mittens were designed for young occasional skiers. They will keep their hands warm in any weather conditions.

Skill Level

abrasion 

Season

Reinforced Palm

Breathability

To Bring Warmth

leash

Tightening Type

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the environment. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Loss prevention system

Waterproof membrane and water-repellent outer fabric.

Designed for young occasional skiers who want to stay warm in winter. These gloves will keep their hands dry whatever the weather conditions.

Glove Type

Options

All Wedze gloves and mittens have a water-repellent treatment that makes water slide off the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water-repellent. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier, making the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h (12 mph), the temperature will feel like -10°C.Windproof fabrics limit wind chill and cold.

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Component encourages wicking and minimal drying.

Moisture management

This ski base layer was developed for kids. It will keep them warm on the slopes.

Intensity

Reversible

Style

The BL 100 Base Layer Bottoms have a regular fit.
The classic straight cut adapts to a wide variety of body shapes.

How do the BL 100 Base Layer Bottoms fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


What are the benefits of polyester?

We commit to repairing your product free of charge for the duration of the warranty. If you need seams, zippers, or another element repaired, contact your store. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

This product is repairable

100 g/m² wadding. Warm, soft, brushed knit lining.

Good: 5,000-mm-rated coating. Taped seams at the seat. Lower leg gaiters.

Elastic waistband. Adjustable, detachable straps.

Breathable, perspiration-wicking component.

These pants were developed for occasional skiing. Perfect for enjoying the snow and staying warm and dry.

Adjustable Straps

Thermal insulation will keep your young skiers at just the right temperature. This garment adapts to the body’s movements and the conditions. Wedze uses wadding for insulation to keep the body warm. Wadding is a synthetic component made from polyester that stores more or less air, depending on the length of the fibres. The thicker the wadding, the more air it contains and the warmer it is.

The waterproof coating is spread on the inside of the outer fabric. It prevents water from seeping into the garment but allows water vapour produced by the body to escape. This keeps kids dry and more comfortable.

Coating

In addition to the waterproof fabric, we increased the waterproofing of these pants with taped seams. Waterproof adhesive strips taped to the inside seams make these pants fully watertight. These taped seams are in the areas most exposed to snow. On these pants, they are around the buttocks.

To personalize this jacket, write your child’s name on the label at the top of the back lining. Practical for finding their jacket after ski class or at school.

To keep your legs warm and dry, 2 layers of clothing are enough:
One base layer to wick away perspiration and one pair of ski pants to protect against the elements and provide warmth.

This ski undergarment is designed for little skiers. It will keep them warm for a great day of skiing this winter.

Collar Type

sleeve length

anti-uv

The BL 100 Base Layer has a regular cut.
It is a classic straight cut that adapts to a wide variety of body shapes.

How does the 100 base layer top fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive and offers excellent performance in various respects, and especially because the fibres can be knitted to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.
Its ability to reduce odours is limited.

To make sure you stay warm and dry, we recommend using the “three technical layers” rule:  Layer 1: a second skin, to stay dry. Layer 2: an insulating layer that keeps the heat in. Layer 3: a protective layer that protects against the elements.

How to dress your children so they keep warm on the slopes

Polyester knit for breathability and drying.

Regular cut and stretch fabric for freedom of movement.

Freedom of movement

Very soft, warm and comfortable ski tights. So pleasant you’ll forget you’re wearing them.

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

Beanie Length

Type of Beanie

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Very soft, warm and comfortable base layer. So pleasant you’ll forget you’re wearing it.

200 g/m² back wadding, brushed knit lining, and imitation fur.

Polyurethane palm and finger tips for extra durability.

Wide cuff makes them easy to get on. Anti-loss wrist leash.

Easy dressing

Adjustable wrist hook and loop tab strap and elastic tightener at the cuff.

Label in the lining to write your child’s name.

These ski mittens were designed for regular use by young skiers. Longer cuffs make them easy to get on while providing an excellent seal.

Maximum wash temperature of 30°C. Very delicate cycle.

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. 

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C.  Windproof fabrics limit wind chill and cold.

Easy to get on and off

An elastic drawstring that goes around the wrist can be used to remove the mittens on ski lifts without losing them.

With its wide cuff, the mitten sits naturally over your ski jacket, providing an effective barrier against air and snow.

A watertight mitten

Soft fleece balaclava for warmth and comfort.

This fleece balaclava was designed to protect your child’s head from the cold.

beanie compatible

Wearing a balaclava is also more hygienic if you rent or borrow a helmet.

Hygiene

Cut short in back to make it comfortable to wear with a ski jacket. This prevents added layers that can limit freedom of movement while skiing.

Cut of the balaclava

Wedze models fit children with a head size between 52 and 56 cm (20.5” and 22”). Depending on the elasticity of the weave, this measurement can vary slightly.

For a child with a head size between 48 and 52 cm (19” and 20.5”), choose the kid size. 
For a child with a head size below 48 cm (19”), choose a baby size.

Sizing

Kids' Neck Warmers

200 g/m² back insulation, brushed knit lining, and imitation fur.

Adjustable wrist hook-and-loop strap and elastic tightener at the cuff.

These gloves were developed for young regular skiers. Thanks to their long sleeves, they are easy to put on and guarantee a good seal. 

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. As a result, the fabric does not become saturated with water. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. 

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold.

With its wide cuff, the glove fits naturally over your ski jacket, keeping out any air and snow.

Airtight gloves

Elastic waistband.Adjustable, detachable straps.

These pants were developed for occasional skiing during winter.Perfect for enjoying the snow and keeping warm and dry.

Thermal insulation keeps your young skiers at just the right temperature. This garment adapts to the body’s movements and the conditions. Wedze uses wadding for insulation to keep the body warm. Wadding is a synthetic component made from polyester that stores air depending on the length of the fibres. The thicker the wadding, the more air it contains and the warmer it is.

The waterproof coating is applied on the inside of the outer fabric. It prevents water from seeping into the garment but allows perspiration to escape. This keeps kids dry and comfortable.

In addition to the waterproof fabric, we increased the waterproofing of these pants with taped seams. Waterproof adhesive strips taped to the inside seams make these pants fully watertight. These taped seams are in the areas most exposed to snow. On these pants, they are around the seat.

To personalize these pants, write your child’s name on the label at the top of the lining. Practical for finding their pants after ski class or at school.

To keep your legs warm and dry, two layers of clothing are enough:
One base layer to wick away perspiration and one pair of ski pants to protect against the elements and provide warmth.

Medium thickness sock for narrow or medium ski boots.

Precision

Fully elastic sock for perfect positioning on the leg.

Stability

Synthetic yarn designed to wick moisture to the outside of the foot.

Designed to keep young skiers and snowboarders warm on their adventures.

pattern

height of the sock

Packaging


The wool and acrylic blend combine insulating power and durability. We have refined this sock to provide support in more sensitive areas. The tibia reinforcement is positioned to provide comfort. 

Composition

All our sock sizes cover 3 or 4 shoe sizes. The elastane helps the socks stay in place. Foot length, size, and volume vary from person to person: it is important to try on the socks before going skiing.
We always recommend choosing slightly small over slightly large socks.

Choosing the right sock size

Designed for young skiers and snowboarders for all their adventures on the slopes.

Maximum wash temperature of 40°C. Normal cycle.

All our sock sizes cover 3 or 4 shoe sizes. The elastane helps the socks stay in place. Foot length, size, and volume vary from person to person: that’s why it’s important to try your socks on before going skiing.
We always recommend choosing slightly small over slightly large socks.

Double-sided microfleece. A density of 200 g/m² ensures optimal comfort.

Polyester knit: allows perspiration to escape (RET = 6.3).

Only 176 g (6.2 oz) in size 10 to 11 years.

Lightweight

Compressible and can be easily carried in a backpack.

Machine washable at 30°C, quick drying and crease-resistant.

Easy maintenance

This fleece was designed to keep your children warm during outdoor activities in cool weather.

Sportsperson’s Height

type of hood

Hood

Zipper Type

The mission of the fleece component is to trap air thanks to the volume created by its texture (and the brushing of the knit).
This air acts as a natural insulator, keeping the body warm.

Fleece material: Insulates with air

We conduct lab tests to ensure the highest durability standards: an abrasion- and friction-resistance test to ensure that the fleece does not pill; a colourfastness test; and an aging test to ensure that repeated washing does not alter the fabric’s properties, thickness, or appearance.

Fabric durability

Created in our international design centre at the foot of Mont Blanc in France, this fleece jacket is manufactured by our suppliers in Vietnam and Bangladesh.
We collaborate closely with these partners who have specialist knowledge in fleece manufacturing. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

wedze

Kids' Ski Neck Warmer - Firstheat