Name: Hand Warmer - 30 pack
Brand: WEDZE
SKU: 2139632
Price: 17 CAD
Availability: InStock
Rating: 5 (3 reviews)

Eco-design

Two-fabric neck warmer protects you from the cold.

Warmth

Two fabrics mean it can be worn six different ways.

Flexibility

The knit part is worn over the face to provide good heat transfer.

Moisture management

This neck warmer is practical and clever: it can be worn six different ways to efficiently protect you from the cold.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

modular

Condition

pattern

Weather Conditions

Reversible

Style

Main Material

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Modular

Hats, Gloves & Neck Warmers

Main fabric with a density of 190 g/sqm made of 86% wool

Conductive material on the thumb and index finger for touchscreen use.

Tactile efficiency

Wool yarn sheathed with a polyamide filament to optimize abrasion resistance.

Abrasion resistance

These fine liner gloves are great for handling small objects.

Dexterity

Wool knit allows water vapour to escape so that your hands stay dry.

Breathability

These wool liner gloves are soft to the touch and provide additional warmth in cold weather.

Professional dry cleaning with tetrachloroethylene and all solvents listed opposite the F symbol. Normal cycle.

Waterproof

Options

Air Temperature

Windproof

Frequency

anti-slip

reflective

Reinforced Palm

Water-Repellent

Tightening Type

The dexterity of a glove is its ability to handle objects with ease. Our liner gloves have been given a score from 1 to 5 in a laboratory study. The closer the score is to 5, the easier it is to handle objects as if you weren’t wearing gloves. 
In particular, tests were done to measure how easily it is to get a jacket on and handle the zipper while wearing these liner gloves.

What does the dexterity of a glove refer to?

Size - Circumference of palm

3XS - 16.9-17.7 cm (6.7-7 in)
2XS - 17.8-18.5 cm (7-7.3 in) 
XS - 18.6-19.3 cm (7.3-7.6 in)
S - 19.4-20.1 cm (7.7-7.9 in)
M - 20.2-20.9 cm (8-8.2 in)
L - 21-21.7 cm (8.3-85 in)
XL - 21.8-22.5 cm (8.6-8.9 in)
2XL - 22.6-23.3 cm (8.9-9.1 in)
3XL - 23.4-24.1 cm (9.2-9.5 in)
4XL - 24.2-24.9 cm (9.5-9.8 in)

Size chart

When worn under hiking gloves, these liner gloves will give you 3°C of additional warmth.

This corresponds to the ambient temperature at which 100% of testers felt comfortable.
For better protection, we recommend that you wear gloves over the liner glove.

All our gloves are lab-tested using a thermal hand to determine their level of insulation and minimum temperature rating. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h (6 mph) winds. These temperature ratings are only valid in walking conditions.


How is the comfort temperature measured?

Optimize the insulation of your hands by applying the layering principle. Wearing liner gloves in addition to gloves creates several air pockets that effectively insulate your hands from the cold. To achieve this, the gloves must be big enough not to compress your fingers. This is because compression slows down blood flow in the fingers, which prevents them from staying warm.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If your clothing is inadequate, your body cools, and circulation to your hands and feet drops to keep your upper body warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

We recommend that you machine wash your merino wool liner gloves at 30°C on a normal cycle, preferably with liquid detergent. 

Dry them on a flat surface, away from moisture and all sources of heat. This could damage the fibre and make them lose their shape. Never put them in the dryer.
   

How to maintain your merino wool liner gloves

These gloves do not protect against the spread of viruses or microbes.

Warning!

clearance

The main yarn of the sole contains 44% wool.

Medium-thickness socks for medium or wide ski boots.

Precision

Synthetic yarn designed to wick moisture to the outside of the foot.

Fully elastic sock for perfect positioning on the leg.

Stability

These socks are designed for skiers and snowboards who practice regularly in all weather and are looking for warm, technical socks.

Skill Level

Season

reinforced area

height of the sock

thickness of the sock

reduced chafing

moisture management

Sock Height

Type of Socks

shoes with left or right mark

Packaging

The combination of materials provides good thermal insulation. 
The wool in the sole delivers a combination of durability, insulation, and moisture absorption. 
Acrylic also gives thermal protection.
The elastane gives you good foot support.

Composition

Medium-thickness socks recommended for ski boots with a medium or large shell.
Toe box for greater comfort.
French terry fabric heel and toe.
French terry fabric shin protects you from chafing against ski or snowboard boots.

Features

Fully elastic sock, ergonomic design for greater comfort.

Ergonomics

All our sock sizes cover 3 or 4 shoe sizes. The elastane helps the socks mould to your feet and stay in place. Foot length, size, and volume vary from person to person: That’s why it’s important to try your socks on before going skiing.
We always recommend choosing slightly small over slightly large socks.

Choosing the right sock size

Blisters are generally caused by socks, shoes, or foreign objects chafing feet. Humidity also plays a role, as it makes skin more vulnerable.
Chafing is reduced when the sock stays in place.
Some models have anti-friction yarn to reduce irritation.
These socks do not provide 100% protection from blisters.

Reduce blisters

Our skiing socks are guaranteed for 2 years.
Our commitment To offer you long-lasting products that you can use for all your winter sports. The products we love the most are those that have had many adventures, with many more to come!

Warranty

Ski Boots & Socks

Waterproof membrane, water-repellent outer fabric.

Polyurethane palm hand for extra strength.

Durability

Elastic tightening system at the wrist. Wide cuffs.

Adjustable

These mittens are designed for kids who ski occasionally. They will keep their hands warm in any weather conditions.

Glove Type

abrasion 

leash

To Bring Warmth

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the environment. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h (12 mph), the temperature will feel like -10°C.  Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to get on and off

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Loss prevention system

Warms the body in cold weather for 5 to 6 hours.

Ready to use, activated simply by contact with the air. Adhesive warmer.

Ease of use

Open the pack, shake 5 times, wait 10 minutes. Activate at room temperature.

Fast acting

Designed to provide you with warmth, additional comfort, and extra enjoyment during your winter sports activities.

Duration of Action

reusable

Body Area

Seniors, people with disabilities, and children should use this product with care and under supervision.
Seek the advice of a doctor before use in cases of diabetes, delicate or sensitive skin, blood circulation problems, paralysis or damaged nerves, rheumatoid arthritis, if you are pregnant, or if you have any doubts regarding the product.
Do not apply to frostbite or desensitized skin. 
Do not use while sleeping. 
Do not use at the same time as external analgesics or other heating devices.

Precautions

Never stick the warmer directly to your skin.
Ideally, stick it to your first layer of clothing, on the outside. The other layers (sweater, fleece, jacket, etc.) will keep the heat in.

Instructions

The exothermic reaction consumes the activated charcoal and oxidizes the iron. Once the fuel is consumed, the reaction is complete and the powder becomes hard.

Single-use product.

Compact, it fits easily in a pocket or backpack.

Compact design

This beanie can be worn unrolled or rolled for a trendy look.

Jacket Type

Type of Beanie

Beanie Length

All adult Wedze hats come with a small inner label on the back seam. You can instantly see which way to put it on: align the small marker with the back of the neck—that’s it! The hat fits perfectly!

Wedze models fit adults with a head size between 56 and 59 cm (22” to 23”). Depending on the elasticity of the weave, this measurement can vary slightly. 

Adult size

Warms feet in cold weather for 5 to 6 hours.Single-use product.

Open the bag, knead, wait 10 minutes. Activate at room temperature.

Ready for use. Activates when in contact with air. Adhesive warmer.

To last 5 hours, the warmer must be placed in the shoes when warm.

Long-lasting effect

Never stick the warmer directly on the skin. Seniors, people with disabilities, and children should use this product with care and under supervision.
Seek the advice of a doctor before use in cases of diabetes, delicate or sensitive skin, blood circulation problems, paralysis or damaged nerves, rheumatoid arthritis, if you are pregnant, or if you have any doubts regarding the product.
External use only. Do not apply to frostbite or desensitized skin. 
Do not use while sleeping. 

A combustible (iron powder/active carbon mix) and a combustive (oxygen in air)
 are required.
The reaction stops 
– when there is no more active carbon (after approximately 5 hours) – in an airtight environment (in a rubber boot or with neoprene cycling overshoes). The interruption is temporary. When the warmer is exposed to air, the reaction will start up again.

How it works


1. Remove the warmer from the bag and knead it to start the heating process with the oxygen and humidity in the air. 
2. Wait 10 minutes, as the warmer must be warm before enclosing it in your boots.
3. Ideally, activate it in an environment with an ambient temperature of 20°C (at home, in the car, etc.).
4. Although activating it at 0°C is possible, you will have to wait longer for the warmer to be hot.

The reaction stopped due to lack of air.
Remove the warmer from the boot and expose it to air, knead it between your fingers to warm it faster, and place it back in your boot once it has warmed up again.
It is frustrating when your warmer does not warm you up while you are exercising, but it warms up as soon as you get home and no longer need it.

What if my warmer stops heating after 1 hour?
Or if it isn’t hot enough?

3. Avoid intensive activity (cross-country skiing, figure skating, etc.), as the perspiration will dampen the mix and overheat it.
Warning: Kids’ feet and hands sweat two or three times more than adults for the same activity
4. Do not stick to the arch of the foot, as laces rest on this area and friction will accelerate the reaction. Stick to the toe area only.

Beware of burn risks

– if there is no air around the warmer: enclosed in a neoprene shoe cover or in rubber boots.
– in extreme conditions: in very cold weather, the warmer provides extra warmth. Unfortunately, if the temperature is too low, it takes a long time to warm up.
– in very high altitude: > 3,000 m, the lack of oxygen limits the reaction.

What happens when there is not enough oxygen

To keep your feet nice and toasty with these foot warmers, you should know:
– exothermal reaction starts on the production line, during manufacture 
– the active mixture is checked 
– at the end of the production line, the foot warmers are inserted into the plastic packaging that stops the reaction.
It will start again when the package is opened and it is exposed to oxygen and humidity.

Good to know

85% duck down and 15% feathers. Inner cuff.

Waterproof membrane and water-repellent outer fabric.

Mitten does not hinder movement or grasp.

These down-filled mittens were designed for the regular skier looking for maximum comfort and warmth.

Drying in a tumble dryer possible. Normal temperature, maximum exhaust air temperature of the drum 80°C.

Wedze gloves and mittens are treated for water-repellency to ensure that water is not absorbed, but rolls off the surface. This means the fabric does not become saturated with water. It remains light and warm. A fabric is made water-repellent by applying a treatment to its outer surface. To remain effective, this treatment must be restored every 2 to 3 washes using specific products available in our stores.

Component’s water-repellent property

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the outside. This membrane acts as a barrier to make the product waterproof. The product’s outer materials also benefit from a water-repellent treatment that reduces water absorption. Only a rubber-type glove is watertight. A glove with a membrane, under extremely humid conditions, will have limited waterproofness.

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C.  Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Simply pull the wrist-strap with the opposite hand.

Easy to put on

A drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Anti-loss system

It’s the glove’s ability to handle objects. Our gloves were field-tested for dexterity and rated on a scale of 1 to 5. A dexterity rating of 5 means that it is as easy to handle objects as with a bare hand. 
To evaluate the level of dexterity of our gloves, we tested putting on and removing masks, adjusting ski boot hooks, and fastening or unfastening a jacket.

What is a glove/mitten’s dexterity?

To warm up, the warmers need oxygen and humidity.

Open the bag, shake it, and wait 10 minutes. Ideally, activate it at room temperature.

Blow on the warmer for faster activation, especially at 0°C or altitudes over 2,000 m.

Releases a gentle heat for at least 5 to 6 hours. Single-use product.

These hand warmers offer you regular gentle warmth for 5 to 6 hours, for greater comfort during your winter activities.


1. Remove the warmer from the package and shake it 5–6 times to activate the heating process.
2. Wait for 10 minutes, since the warmer must be fully warm before it is put in a confined space (pocket, glove, etc.).
3. Ideally, activate them in an ambient environment of 20°C (at home, in the car, etc.).
4. At 0°C or above 2,000 m altitude, blow on them several times. The warmth and moisture of your breath will accelerate the reaction.

Heating instructions

The warmer is a mix of activated charcoal powder and iron that produces heat through oxidation. 
The reaction stops:
- When all the activated charcoal is gone. The reaction stops completely after about 5 to 6 hours.
- In an airtight space (in a rubber boot or with neoprene cycling overshoes). 
The reaction starts when the warmer is exposed to air.

Children, the elderly, and persons with disabilities should use this product with caution and supervision.
Persons who have diabetes, delicate or sensitive skin, circulation problems, paralysis, damaged nerves, rheumatoid arthritis, are pregnant, or who have any concerns should consult a physician before using the product.
Do not apply to frostbitten or desensitized skin. 
Do not use while sleeping. 
Do not use in combination with topical analgesics or heating devices.

The exothermic reaction begins on the production line:
- The mixture is activated, then checked 
- Once inspected and validated, the pair of hand warmers is inserted in the plastic packet, which stops the reaction and therefore the heat generation. The reaction will start again when the pack is opened and the warmer is exposed to oxygen and humidity.

This means that the reaction is suppressed by lack of air. Just remove the warmer and knead it or blow on it to begin the heating process again. You can then put it back in your glove or pocket.

What should I do if my warmer stops heating after an hour or so?
What if it doesn’t get warm enough?

The warmer will not work:
- If there isn’t enough air around the warmer (if it is enclosed in neoprene, for example).
- If conditions are extreme: the warmer provides additional warmth, but may not be able to generate adequate heat in extremely low temperatures.
- If the altitude exceeds 3,000 m, the lack of oxygen reduces the reaction.

Troubleshooting

The exothermic reaction consumes the activated charcoal and oxidizes the iron. Once the fuel is spent, the reaction ends and the powder becomes hard.

200 g/m² wadding on back and hand, 80 g/m² on the palm synthetic fur lining Cuffs.

Polyurethane palm and reinforced index finger.

Wide cuff that can be placed above or below the jacket sleeve.

These very warm gloves were developed for regular skiers. Soft and easy to put on, they will give you maximum comfort when out on the slopes.

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

All Wedze gloves and mittens are windproof.Did you know that the wind makes you feel colder?At an outside temperature of 0°C and a wind speed of 20 km/h (12 mph), the temperature will feel like -10°C.Windproof fabrics limit wind chill and cold caused by the speed of the sport.

A special cuff has been built inside the 500 gloves. This soft and comfortable cuff keeps out drafts and snow. Extra warmth.

Airtight

It reflects how easily you can handle objects while wearing the glove. All our gloves are field-tested and given a dexterity score on a scale of 1 to 5. Gloves with a dexterity score of 5 allow you to handle objects just as you would with bare hands. 
The dexterity score is based on how well we could remove and put on ski goggles, adjust the hooks on a ski boot, and open and close a jacket.

Warm your hands in cold weather for 5 to 6 hours.

Ready to use, activated simply by contact with the air. 

Diffuses a soft heat for at least 5 to 6 hours.Single-use product.

The heating process activates upon contact with the air: 
1. Remove the warmer from the package and shake it 5–6 times to activate the heating process.
2. For an optimal heating temperature, let it get activated in the open air for around 10 minutes before the start of your outdoor activity, ideally in an ambient environment of around 20°C.
3. Once you can feel the heat, place the warmer in a confined space (jacket pocket, gloves, etc.).

The exothermic reaction consumes the activated charcoal and oxidizes the iron.Once the fuel is consumed, the reaction is complete and the powder becomes hard.

Sports/

Winter Sports/

Snowboarding/

Hats, Gloves & Neck Warmers/

wedze

Hand Warmer - 30 pack