Name: Sailing Windbreaker Pullover 500 - Men
Brand: TRIBORD
SKU: 2535055
Price: 60 CAD
Availability: InStock
Rating: 4.75 (4 reviews)

Stretch

Abrasion resistance

Pockets

Bermuda shorts for inshore sailing in warm weather.

Ironing at a maximum iron soleplate temperature of 200°C.

Iron at a maximum soleplate temperature of 150°C.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Maximum wash temperature of 30°C. Very delicate cycle.

Stitching Type

Frequency

Pocket

Number of Pockets

Weather Conditions

Type of Bell

Style

Place of Practice

Main Material

Clothing

Tested in 2 hours of moderate rain
15,000 mm Schmerber

Waterproof

Very breathable coated fabric (RET < 12): less condensation.

Breathability

3 zip pockets, including 1 inner pocket.

Exterior coating to help counter the wind chill.

Windproof

Fabric treated so that water slides off the surface.

Water repellent

Resistance to salt water

An inshore jacket for sailing in warm and stormy weather.

Maximum wash temperature 70°C. Normal cycle.

Ventilation Zippers

Collar Type

Precipitation

sleeve length

Type of Length

Hood

Schmerber

We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 15,000 mm before and after ageing (5 washes). This is equal to 15,000 Schmerber (the average pressure exerted during rainfall).
This jacket was tested in 2 hours of moderate rain (60 L/m²/h).

Waterproofing 1/2

- High collar
- Injection-moulded plastic to avoid salt oxidation
- Water-repellent components (water runs off the fabric)
- 100% taped seams
- Central opening features a flap with a drainage channel for optimal waterproofing

Waterproofing 2/2

The hood is attached and doesn’t stow into the collar.
Height- and depth-adjustable.
The hood visor and headband provide good coverage and a better hold.
The high collar protects your neck.

Features 2 front zip pockets and 1 inner right chest pocket with a rip-tab closure. Note: Pockets are not waterproof.

The full-length zipper includes an inner storm flap that protects you from wind and water,
and the collar has a soft flap to shield your chin.

Front zipper

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for water vapour generated during physical exertion to pass through the fabric.
For example:
RET < 9 = very breathable;
RET 9–12 = breathable.
 
     

This jacket stays lightweight and breathable in wet conditions because water
slides off the treated fabric instead of seeping in. The water-repellent coating applied to the jacket’s exterior may change over time.
To restore it, place the jacket in the dryer for 10 minutes at the lowest temperature.

Water repellency

To preserve its water-repellent coating, do not wash this jacket too often.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Wash it on the synthetics cycle at 30°C or 40°C with your usual detergent. Don’t use fabric conditioner or bleach, as these could damage the water-repellent coating. Very important: Choose a full-rinse cycle or extra rinse.

How to wash your jacket

Drying is a crucial phase in restoring the water-repellent treatment.
We recommend laying your garment flat on a clothes rack to dry. Warning: Never dry your jacket directly on a radiator.
Next, put your garment in the dryer and run a short synthetics cycle (10–15 min.) before turning it right-side-out. Caution: Do not over-dry the garment.

How to restore water repellency

Fabric can withstand 2 hours of moderate rain. Fully taped seams. 

Breathable fabric to limit condensation (RET index = 12).

Fabric counters the windchill effect up to force 6/7 (50 km/h).

Loose fit adjustable at the waist (neoprene), neck and cuffs using the rip-tab.

Freedom of movement

Water repellent fabric that dries quickly (water slides off the fabric).

Quick drying

1 zipped shoulder pocket (the size of a penknife) with holes to drain away water

Fabrics and accessories resistant to salt water.

SIZE MARKINGS: inside markings for visibility when inside out or with neck open

Ease of use

Our Tribord designers—and fellow sailors—designed this windproof smock for regular dinghy/catamaran sailing in cool weather

Skill Level

Wind

This smock has been approved in a simulator reproducing the conditions of MODERATE RAIN
- Moderate rain corresponds to a flow of 60L/m2/h - (rainfall of 60mm/h) for two hours
- Component resistant to water pressure of 2000mm after ageing (= 2000 Schmerber - average pressure exerted by water during a downpour)
- 100% taped seams.
- The design of the extremities (adjustments and components) helps stop water getting in

WATERPROOFING of the Tribord 500 dinghy/catamaran smock:

The neck with its flexible fabrics can be adjusted in 2 ways:
* closing the half zip with its pull cord positioning the "wallet-like” pleats inside the waterproof fabric (depending on the shape of the neck, it is recommended to fold the fabric in your hand to avoid wrinkles)
* closing the smooth outer fabric with the rip-tab.

Adjustments of the Tribord 500 dinghy/catamaran smock: NECK FASTENING

For more waterproofing, less wind entry and greater freedom of movement:
* the belt is made of flexible neoprene, adjustable by 2 rip-tabs positioned on the right and left of the waistband
* the cuffs are made of a smooth, flexible and waterproof fabric, adjustable by a rip-tab (for small cuffs, the fineness of the fabric allows a clean fold).

Adjustments of the Tribord 500 dinghy/catamaran smock: WAISTBAND AND WRISTS

There are 2 small fabric straps sewn on each side of the neoprene belt. They are for hanging or sticking mittens or gloves in (hanging mittens or gloves by their rip-tabs), so as to not get in the way before or after practice.

Glove storage in the Tribord S500 dinghy/catamaran sailing jacket:

The size of the shoulder pocket was designed so as not to be cumbersome or too heavy in order to not hinder manoeuvres or movement.
Its design and tests were therefore carried out with a standard size penknife, a rope and a snack of 2 cereal bars. The contents remain stable in the pocket and remain accessible.

The shoulder pocket of the Tribord S500 dinghy/catamaran sailing jacket:

Flexible, grooved sole for good water drainage.

Grip

These waterproof boots will keep feet dry on board and on shore in wet weather.

Condition

Season

Boot Height

Fastener Type

Rain boots

Genuine rubber boots for total waterproof protection

Non-marking, non-slip micro-grooved natural rubber outsole.

The natural rubber flexes with your foot.

Fitting comfort

These rubber boots were designed for sailing in rainy or windy weather.

Maximum wash temperature 95°C. Normal cycle.

Removable Sole

Sock Height

Height: 32.5 cm.
Width: 42 cm at calf.

Lined for extra warmth and comfort.

Removable, machine-washable insole.
Hand made.

Technical features

Reinforced grip to protect your hands. Complies with standard EN 388.

Warmth

Made of soft neoprene that adapts to your movements.

Reinforced grip for better handling of ropes and lines

Traction

These gloves are designed to protect your hands in regular light sailing conditions in autumn and in spring.

Thickness (mm)

Glove Type

abrasion 

reinforced area

Reinforced Palm

Protection Area

anti-slip

Tightening Type

Neoprene fabric helps trap heat around the hands, even when the gloves are wet.
Duragrip (polyurethane) coating provides excellent grip and protects your hand from chafing.

Materials

Fingerless gloves are often used in summer to protect your hands while leaving your fingers free without overheating. Neoprene gloves help you retain maximum warmth in cool weather, particularly in spring and autumn.

How to choose the right gloves WHICH ONE SHOULD I CHOOSE?

Neoprene gloves are ideal for dinghy sailing, because they keep your hands warm and comfortable even when wet. They’re also suitable for yacht sailing.

Rinse with fresh water after each use to prevent odours. Air dry at room temperature.

Care tips

Neoprene has plenty of stretch, so we recommend choosing gloves that fit tightly over your hands. Gloves that are too big won’t provide as much insulation and will be less comfortable.

Choosing a size

Wetsuits and rashguards

3/2 mm neoprene. Blind-stitched and glued seams to help keep water out.

Wear-resistant anti-abrasive reinforcements on seat, backs of thighs and knees.

Durability

Cut suitable for the trapeze position
Separate pieces on the arms and torso.

Comfortable thickness on knees: 7 mm, with multi-layer stretch neoprene

User comfort

SIZE MARKINGS: marked inside for visibility when turned inside out after drying.

Zip at the back with a pull tab to make it easier to open and close.

Easy dressing

Our Tribord designers—and fellow sailors—designed this neoprene wetsuit for regular dinghy/catamaran sailing in cool and cold weather

anti-uv

Water Temperature

Zipper Type

Neoprene Thickness

By trapping a thin layer of water around the body, a neoprene wetsuit works in two ways: 
1. The water trapped inside the wetsuit gradually warms up
2. Heat transfer from the body decreases. 
The wetsuit and the thin covering of water form a layer of insulation.

Neoprene is a closed-cell elastomeric foam with trapped nitrogen bubbles that have insulating properties.

The concept of thermal insulation using neoprene:

The Tribord DG500 neoprene wetsuit is made of 100% neoprene (thickness: 3mm) to ensure optimal thermal insulation. 

All seams are sewn together with strong thread suited to this particular type of fabric and are glued to prevent water getting through the seams (GBS).
A neoprene strip is sewn under the zip to reduce the cooling effects of any water that may get through it.

In the event of moderate to strong winds and cold weather, also wear the Tribord S500 sailing anorak

The technical GBS design of the DG500 dinghy/catamaran neoprene wetsuit is intended for cool and cold weather:

The Tribord DG500 dinghy/catamaran neoprene wetsuit has a cut and materials designed to make the movements and different positions of sailing much easier.

The arms and chest piece consist of a different piece of fabric to make manoeuvres and movements much easier.
The legs, buttocks and knees are also separate pieces to make sitting, crouching and changing sides in the boat much easier.

All the seams are stretch seams.

Freedom of movement of the DG500 dinghy/catamaran neoprene wetsuit:

It has reinforcements on and below the knees and on the seat and thighs. The thickness is 7mm on the knees for added comfort.
The extra fabric works in two ways:
- to reduce the wear and tear of the neoprene in areas that are the most exposed to rubbing from the boat (deck fittings, rubbing strake, carpet, etc., depending on the craft) 
- to reduce the inconvenience of this rubbing on the knees, buttocks and thighs for the user, who is wearing the suit and is active on the boat

Neoprene reinforcements on the DG500 wetsuit on the knees, buttocks and thighs:

The neck finish and height has been developed to limit the sensation of discomfort from the neoprene and irritation on even the most sensitive skin. 
However, not everyone's skin reacts in the same way: in this case, we recommend that you wear a top under the wetsuit to reduce sensitive rubbing and chafing.

Construction of the neck of the DG500 dinghy/catamaran neoprene sailing wetsuit:

Tested in moderate rain for 2 hours
5,000 mm Schmerber JIS
Pockets are not waterproof.

3 secure pockets. (1 inner and 2 outer).

This jacket protects you from spray and moderate rain during training and inshore yacht racing.

We measure the resistance of a fabric to water pressure in mm of water column (ISO 811 standard).The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 15,000 mm before and after ageing (5 washes). This equates to 15,000 Schmerber (JIS standard), which is the average pressure applied by the water during a rain shower. 
This jacket has been tested in 2 hours of heavy rain (60 L/m²/h).

- Mid-height collar
- Plastic-moulded zippers to prevent salt oxidation
- Water-repellent materials (water runs off)
- Fully taped seams
Front zip with storm flap and drainage channel

The hood can be stored in the collar: this gives the anorak a completely different look!
Completely depth and height-adjustable hood.

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for perspiration to pass through the fabric.
For example:
RET < 9 = highly breathable fabric
9 < RET < 12 = breathable fabric
The RET of the Sailing 100 anorak is 12.

Water-Repellency Information

Washing your jacket

Thumbs and index fingers cut to improve dexterity.

Dexterity

Made of soft, comfortably stretchy neoprene.

Fingerless gloves are often used in summer to protect your hands while leaving your fingers free without overheating. Three-finger gloves keep more heat in when the weather is cooler, while keeping your index finger and thumb free to perform intricate sailing manoeuvres.

Dual knit design for warmth and breathability | Comfortable in 10°–13°C weather.

Softness

Manufactured to eliminate waste and reduce impact.

Eco-design

Weight

This elegant, sailing pullover will keep you warm when sailing in cool weather, between 10°C and 13°C.

Professional dry cleaning with tetrachloroethylene and all solvents listed opposite the F symbol. Normal cycle.

Type of Layer

Our designers were inspired by the sailor codes when designing this jumper. It features 4 buttons near the collar and a mesh knit for an authentic sailor look.

A sweater inspired by sailing.

100% cotton
We set out to design a unique garment with a breathable moss stitch above the arms and a dense pique knit below the sleeves. This choice makes the sweater lightweight and easier to move around in.
A straight knitting process allowed us to achieve a neat finish.

100% mesh knit

We intentionally designed this sweater as a knit garment. The yarn is knitted before the piece is assembled. As a result, we are able eliminate fabric waste.
Its environmental impact is 10% lower than similar products.

What makes this pullover eco-friendly?

The cut is intended to be fairly tight-fitting, while still having a straight cut. For a slouchy fit, choose a larger size.
The 4 collar buttons make it easy to put on.

This pullover pairs well with Tribord cotton pants and can be worn over a traditional sailing top. Complete the look
with a pair of boat shoes!

Style tips

Tested in 2 hours of moderate rain
16,000 mm Schmerber
Non-waterproof pockets

Adjustable ankle cuffs can fit right over your boots.

The flat elastic waistband ensures a secure, comfortable fit.

Anatomic design

The pants easily pack down into a pocket.

Compact design

These waterproof pants were developed for inshore sailing in stormy weather.

belt height

modular

Water-Repellent

We measure the water resistance of a fabric in mm (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Resistant to water pressure of 2,000 mm before and after ageing (5 washes). That’s equal to 15,000 Schmerber (the average pressure exerted during rainfall).
These pants were tested in 2 hours of moderate rain (60 L/m²/h).

Waterproof properties

Rinse with clean water after use.
Store in a dry place.
Wash as infrequently as possible to protect the water-repellent treatment.
Wash inside out, pocket zipped, on the synthetics cycle (30°C–40°C) with regular detergent. Do not use fabric softener. Do not overload your machine. Run extra rinse.
Line dry.
To restore its water repellency, tumble dry inside out on the synthetics cycle for 10–15 min.

Care instructions

Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the resistance, the more a fabric allows the body’s perspiration escape.
- RET < 9 = extremely breathable
- RET 9–12 = very breathable
- RET 12–20 = breathable
- RET > 20 = not very or not at all breathable

onlyonline

High collar and fitted cuffs and waist to block cold air.

Weighs 400 g in size L. Fabric density: 270 g/m².  

Eco-friendly dye method to reduce our environmental impact.

This elegant, sailing pullover is ideal for cooler temperatures (7°C–10°C).

Grammage

To Bring Warmth

Inspired by classic sailing apparel, this sleek pullover features subtle ribbing and reinforced shoulders.
It’s made in a sweater-like knit with a fleece underside, making it incredibly warm and comfortable.
Thanks to its timeless look, you can wear it on or off the water.

Knit-style exterior and fleece interior

The collar buttons up all the way for maximum protection from the cold.
The shoulders are reinforced with a soft matte fabric to prevent chafing from overall straps.  

Buttoned collar

This pullover is designed to provide maximum freedom of movement.
We reworked the previous model to create a larger, slightly looser-fitting silhouette with wider sleeves. You can therefore choose your usual size.

This pullover goes perfectly with Tribord cotton pants and can be worn over a traditional sailing top. Complete the look
with a pair of boat shoes!

UPF 50+ fabric. Long-sleeved. Blocks at least 95% of UV rays, even when wet.

Sun protection

This anti-UV rash guard is perfect for surfing in warm water for up to 1 hour.

Sports/

Water sports/

Sailing/

Clothing/

tribord

Sailing Windbreaker Pullover 500 - Men