clearance

Hose attached to the pump: easily access the valve between the spokes.

Wide-ranging flexibility

Dual-head inflation valve to easily connect to the valve.

Ease of use

Attach to the bike’s frame using the universal Btwin mount.

Easy transport

Lock-unlock system: remains closed during your ride.

Locking mechanism

Inflates up to 6 bars/87 PSI (MTB/hybrid/city/kids’ bike tires)

Power

Compact design

We designed this pump for all your hybrid bike outings. Can also be used on city bikes, mountain bikes, BMX bikes, and kids’ bikes.

Condition

Skill Level

Valve Type

deflating mode

Weight (g)

hose

type of connexion

number of compression tubes

inflation mode

Pressure Gauge

Tubeless compatibility (Tyre)

Sold In Set

Pressure (Bars & PSI)

Length (cm)

Pump Type

Main Material

Screws into any type of valve (Presta, Schrader, Dunlop). Adaptable thanks to its dual head.

Small and large valves

Stop looking for your hose, this one is directly attached to the pump. This versatile piece fits easily between spokes.

Its major advantage

1) Pull the hose out as much as possible using the pump head.
2) Select the right connector for your inner tube valve (black: large (Schrader) or grey: thin (Presta).
3) Fully screw the head onto the valve.
4) Unscrew the handle.

How to use your pump

Bike Pumps

100% effective on all types of Butyl inner tubes.

Compatibility

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

onlyonline

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Robustness

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

Volume (ml)

Frequency

reflective

Waterproof

Position

Attachment Type

Style

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

Clean the bladder and hose using the drying hanger and 3 brushes.

Easy maintenance

Keep your hydration reservoir and drinking tube fresh and clean with this easy to use three-brush set and one drying hanger.

Intensity

isothermal

Cap Type

Running Hydration Vests & Water Belts

700 x 35 to 700 x 45 tires. 48 mm (2") valve. ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Designed for replacing the inner tube of your 700 diameter, 35 to 45 section tires with a 48 mm (2") Schrader valve.

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 700 x 35 means that the tire is 700 mm in diameter and 35 mm wide.
The dimensions in mm are also on the tire sidewall.
For example, 36-622 means that the tire is 35 mm wide with a 622 mm inner diameter (approx. 700 x 35).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Weight:

Bike Tubes & Valves

Stability

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Bike Hydration

Limits taste and odour

The screw top and mouthpiece ensure a watertight seal.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Graduated scale makes it easy to track intake.

Precision

Compatible with our Water Bottle Cap (item code 8561474) for the mouthpiece.

Versatility

Compatible with all bottle cages on the market.

Container Type

There’s nothing worse than a plasticky taste or smell in a water bottle. But this occurs with most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is flexible and has a neutral taste and smell. When blind-tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C[158°F]).

How to care for your water bottle

Maximum pressure: 6 bar/87 PSI (MTB/hybrid/city/kids' bike)

Clip connection. Reversible to fit different valves.

Clips onto the valve. Adapts to different valve types by removing and reversing the pump head.(See instruction manual).

Valve compatibility

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

Remove the old inner tube using a tire lever.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Vol: 0.5 L (1/2 qt.). Can hold a spare inner tube, tire levers, patch kit, etc.

Attaches under any saddle using velcro tabs.

Easy-to-open zipper.
Cleans easily with water.

Designed to carry the minimum needed for bike repairs and small personal belongings. 

Can carry:
- 1 road inner tube (700) + 3 tire levers + 1 multitool + 2 x CO2 cartridges OR - 1 MTB inner tube (27.5") + 3 tire levers + 1 multitool

This product has a hook for attaching a Vioo Clip, an LED light that can be clipped on anywhere and unclipped in an instant.
With a red or white light that can be used in continuous or flashing mode, you will be clearly visible from up to 120 m (130 yd) away. Battery life is 9 hours in flashing mode, 4½ hours in continuous mode. Easy to recharge via a USB cable (sold with the VIOO Clip).

Inflate up to 6 bars / 87 PSI (MTB / Hybrid Bike / City Bike / Kids' Bike)

Pressure gauge built into the hose so you can always inflate to the right pressure.

Weight: 198 g (7 oz.)Size:30 cm (12").Designed to fit inside your travel bags.

Stainless steel folding base for better stability when inflating your tires

Flexibility

We have designed this pump to combine the compact design of a hand pump with the efficiency of a foot pump. Inflate up to 6 bars.

Inserting the inflation head into the handle protects it from mud, dirt, and everything else you can ride through!

Protective Cover

Power:

1) Unhook the hose and unfold the footrest. 2) Select the right connector for your inner tube valve (black: large (Schrader) or grey: thin (Presta).
3) Fully screw the head onto the valve.
4) Inflate to the desired pressure.

The ergonomic handle makes inflation easy.

Guaranteed grip

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

This bell ensures your safety when riding in a less noisy environment.

Assemble With Tools But Without Tools Provided

Bike's Bells

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

Visual efficiency

With its compact size, you can take the kit everywhere with you.

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Application Type

Maintaining your bike will let you:
- Extend the life of the various components 
- Ensure that it works properly
- Reduce unwanted noise
- Prevent breakages
- Enjoy the pleasure of riding a clean bike

Why should you maintain your bike?

To ensure full maintenance, we recommend that you follow these 3 steps: 
01. degrease your drive train
02. clean your bike
03. lubricate your chain

How to look after your bike

This kit contains the 3 products needed to carry out the 3 steps required to properly maintain your bike. You will be able to carry out at least 3 full services on your bike.
Products included in the kit: 
01. Plant-based degreaser (100 ml)
02. Concentrated bike cleaner (100 ml)
03. All-weather chain lubricant (50 ml)

Kit contents

This degreaser lets you effectively degrease your drive train. You can apply it using a brush or our chain cleaner. 
Application with a brush: pour about 25 ml into a pot and apply generously to your chain, cassette, derailleurs and derailleur pulleys. Leave for a few moments then move on to step 2.
Application with the chain cleaner: pour on about 9 ml, turn the pedals a few times before moving on to step 2.

How to use the drive train degreaser

Pour about 30 ml of concentrate into a bucket of water then apply generously with a sponge to the whole bike. 
The product will not damage the paint or any other components of the bike.
Rinse with clean water then dry your bike. Pay particular attention to drying, especially your drive train, to ensure total efficiency later on. Now you can move on to step 3.

How to use the concentrated bike cleaner

Remove the cap, position the applicator on the lower part of the chain (inner side) and make a full turn (in the opposite direction to pedalling). 
To make sure you don’t apply too much, use your quick-release as a guide.  
Remove the excess lubricant with a cloth placed under the chain, then do 2 or 3 complete turns of the pedal (in the opposite direction).
The lubricant will protect your chain in all riding conditions.

How to use your chain lubricant

01. degrease your drive train if you’re applying the product with a brush, be careful not to project the dirt towards you.
02. concentrated bike cleaner: in winter, use warm water to make this step easier and use cold water in the summer.
03. chain lubricant: apply on the inside of the chain, position the applicator on the lower part of the chain.

Good to know

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

Maintenance advice

Made in

List of ingredients:
Mix of saturated and unsaturated fatty acid methyl ester PEG-30 glyceryl cocoate 
Each ingredient is given with its INCI name (International Nomenclature of Cosmetic Ingredients)

Drive train degreaser composition

Concentrated cleaner composition

Synthetic oil with additives and anti-wear properties, corrosion protection and wash resistance.

Sports/

Cycling/

Bike Accessories/

Bike Pumps/

decathlon

Universal Pump Bracket