clearance

Traction

Robustness

Waterproof

Cushioning

Lightweight

Our products are classified based on performance and features for 3 mountain hiking levels:
- Occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10 km (6 miles) and less than 700 m (2,296 ft.) in elevation gain.
- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km (6 to 12 miles), 700 to 1,200 m (2,296 to 3,937 ft.) of elevation gain per outing.
- Intensive: more than 20 times a year. More than 6 hours, more than 20 km (12 miles), 1,200 to 2,000 m (3,937 to 6,562 ft.) of elevation gain per outing.

How often do you hike and at what intensity?

Certified sole grip. 
To be certified, the boots must pass lab tests to assess their grip rate on different surfaces (smooth, rough, dry, wet). To validate these tests, we have a panel of representative testers evaluate our soles out in the mountains across 500 km (310 miles).
Warning: these boots need a few kilometres of use before reaching peak grip performance.

Grippy sole

In a lab, the boot is immersed in water to mid height while on a mechanical arm that simulates walking. We use this test to determine how long and how far the boot can go and still stay dry. This measurement is validated in the field and in the rain to ensure a consistent result.

Waterproofing test

To keep feet dry, use a waterproof gaiter or mini-gaiter to protect the top of your boots and to prevent water, pebbles, and sand from getting in.

Re-waterproof boots twice a year (search for “waterproofing” on our Decathlon website) to help to restore original water-repellent qualities and prevent stains on the outside.

Making waterproofing last longer

The most important thing is to try on several sizes and styles to find the one most suited to you. 
You can choose one size up from your usual size so your toes won’t bump the toe box when going downhill, as long as you still have the proper support to prevent friction.
Tip: keep your toenails short and, before a long descent, check that your laces are tight enough to keep your foot from sliding forward in the shoe.

What size should I choose?

Some Decathlon stores have a test trail.

1. Try on both shoes, standing up, wearing your hiking socks.
2. Tighten the laces, taking care to make sure they’re evenly tightened.
3. Check two points:
- your heel doesn’t lift up before the shoe when walking uphill.
- your foot doesn’t slide and your toes don’t touch the front when going downhill.
4. Try on several sizes and models.

Break them in gradually to adapt them to your feet.

Buying tips/how to try on hiking boots

Blisters generally develop when the skin is weakened by friction. To prevent blistering, we recommend the following:
- Choose a shoe in your size.
- Wear suitable socks.
- Tie and tighten your shoes properly.
- Make sure you tighten or loosen your laces accordingly, especially before starting a climb or a descent. 
- Wear your shoes on a short trip for the first use.

How to avoid blisters

Waterproof boots are less breathable than non-waterproof boots. Ideally, wear mid-length socks like the MH 500, MH 520, or MH 900 Socks to wick away perspiration and reduce friction.

Which socks?

The original insole in your shoes is designed to fit most feet. Changing the insole may provide:
1. Improved support, as some soles are preformed or reinforced to better support the arch of the foot. 
2. More comfort, as the insoles can also provide warmth and/or cushioning.
3. Longer life, as you can restore the support and comfort of your shoes by replacing the insole each season.

Optimize your shoes: replace your insoles!

Laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, and accelerated ageing.

Lab tests

- Leave to air dry.
- Remove dry mud with a stiff brush. 
- Clean marks using a brush and some warm water
- Leave to dry
- Spray with a re-waterproofing product to restore the upper’s water resistance

How to care for your shoes

To help preserve nature, Quechua is committed to limiting the environmental impact of its products.  
While not yet eco-designed, we work every day to make this product even more environmentally responsible: eco-design, repairability, and sustainability drive our development efforts.

quechua

Women’s Hiking Mid Boots – MH 100 Blue