clearance

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatibility

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Tire Assembly

Skill Level

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Ease of use

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

Condition

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

Limits taste and odour

100% waterproof with the mouthpiece closed, non-drip with mouthpiece open.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Capacity

Clear body graduated for easier intake monitoring.

Precision

The elastomer cap won’t slip off and makes closing the bottle easy.

Traction

Compatible with all bottle cages on the market.

Developed for demanding cyclists who want a bottle that keeps them hydrated as they ride.

Volume (ml)

isothermal

Cap Type

Main Material

All of our "FastFlow" bottles use the SureSnap® valve, the best on the market. This valve controls the flow of water effectively and precisely. When you press down, water squirts out of the mouthpiece.
Plus, the anti-leak mouthpiece can stay open while riding without water dripping onto your bike's frame.

SureSnap® valve

The mouthpiece is 100% watertight in closed position. Use this position for mixing the isotonic drink in the bottle or for carrying it in a bag.
Once on your bike, leave it open. The SureSnap® valve prevent leaks. Drink quickly and safely!

How to use the FastFlow valve

There’s nothing worse than a plasticky taste or smell in a water bottle. But this is the case for most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is supple and has a neutral taste and smell. When blind tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap, and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C).

How to care for your water bottle

Bike Hydration

onlyonline

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

Easy assembly/dismantling

This bell ensures your safety when riding in a less noisy environment.

Frequency

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Bike's Bells

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

Remove the old inner tube using a tire lever.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Our professional advice

Fabric that wicks away perspiration for quick drying.

Moisture management

4 back pockets (including 1 zipped) and 2 side pockets.

Pockets

This jersey was designed for you to start cycling in hot weather, on rides of up to 2 hours or 50km.Cut:Regular fit.

Maximum washing temperature 30°C. Normal cycle.

Intensity

Collar Type

Season

Weather Conditions

sleeve length

anti-uv

Pocket

Style

Machine wash at 30°C. Synthetics cycle. Turn the garment inside out. No fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not bleach. Do not place on a heater to dry.

Care tips

"Regular" cut suitable for all body types.

Men's T-Shirts & Tank Tops

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Sitting comfort

Wide elastic and silicone strips at the thighs.

Stability

Quick drying thanks to active sweat-wicking fabric.

Super handy pocket on the outside of the thigh for easy access while riding.

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

reinforced area

Number of Pockets

retaining strip

belt height

Reversible

Stitching Type

Type of Length

Zipper Type

With Straps

The Endurance collection is for all cyclists looking for comfort, no matter the distance. 

Our designers and engineers pay particular attention to your comfort on the bike at every step of the design process. 
Our aim: make you (almost) forget what you’re wearing and simply enjoy the pleasures of road cycling.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:

• Discover: simple, effective products, suitable for beginner cyclists

• Endurance: main collection for experienced cyclists looking for comfort for their cycle outings.

• Endurance Ultra outfits specially designed for long-distance and touring cyclists.

Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- silicone elastics around the thighs for excellent hold when pedalling
- a fit that is close without compression, so you can forget you're wearing it
- two easily accessible side pockets

How our Endurance cycling shorts were designed

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle.

Developed for men’s bodies, it is made of stretch layers that follow your body’s movement when pedalling.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. Both in the ischial and perineal areas. It has a protective, high-density, 120 kg/m³ foam insert. The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. 
All layers are extremely breathable.

Breathable, high-density foam

Men's Sports Shorts

11-speed chains and derailleurs: Shimano, Sram, MicroShift, and KMC

Designed for road biking and use with direct drive home trainers.

Set of Teeth

Number of Speeds

Cogs: 11-12-13-14-15-17-19-21-24-28-32.
11-28 gearing.
Weight: 375 g (13 oz.).


Teeth

Degrease, clean, and lubricate your cassette regularly for prolonged life. We recommend replacing the chain each time the cassette is replaced. Do not clean using high-pressure water jets

Care instructions

Easy assembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable or open-ended spanner.

Assembly

Easy disassembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable spanner or open-ended spanner and a chain-whip tool.

Dismantling

Bike Cassettes

This pump is designed so you can quickly and comfortably inflate your bike tires.

Weight (g)

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on the this pump was designed so you can get a good and comfortable grip.

Ergonomic handle.

The Pump 100 was designed to be durable and repairable. All wear parts (hose, joints, and pump heads) are available from our after-sales service.

Durability / repairability

Bike Pumps

Category 1 to 3 photochromic lenses - 100% UV protection: adjusts to brightness

Sun protection

Anti-fogging

Lenses made from high-resistance polycarbonate plastic.

Robustness

Wraparound design: protects eyes from wind, objects, and the elements.

Coverage

Large lenses: provides enhanced peripheral vision.

Field of vision

Grips on the arm tips and the nose: keeps the sunglasses from slipping.

Lightweight

Third generation unisex glasses. This new version is defined by a more modern line with a wider screen and lighter weight.

Grip Zone

Technical Lens

Light Level

Service Coverage

Glass Category

With Case

Category 1 to 3 photochromatic lenses: filters 15% to 55% of light at 23°C.
In cold weather (under 10°C), the change in tint is highly reduced. Standard ISO 12312-1.

Full UV protection filter.

Lens

Photochromic lenses automatically adjust to brightness.

Lenses darken in approximately 30 seconds (takes 45 seconds to lighten).
The perceived brightness does not change much even when the outside brightness level changes. 
For example, when cycling, the change in tint is almost imperceptible. 
The tint adjusts gradually, and the eye adjusts to it.
The lenses tint faster in cold temperatures.

Photochromatic technology

Frame material: polyamide.
Nose pad material: shock-resistant polycarbonate.
Arms material: polyamide and rubber.

Arm tips material: shock-resistant polycarbonate.
Size:suitable for all types of faces (narrow to large).

Frame

To effectively clean the treated lenses, rinse them under water with or without liquid soap and gently rub with your fingers. 
Allow to air dry, then wipe gently with a soft, dry (glass cleaning) cloth to remove any remaining marks

Women's Sports Sunglasses

Palm padded with foam for a more pleasant handlebar grip.

Cushioning

Soft, breathable palm. Light, thin elastane fabric on the exterior.

User comfort

Made for maximum comfort on your first ride.

Tightening Type

Cycling Gloves

Vol: 0.6 L (1/2 qt.). Can carry a spare inner tube, tire levers, patch kit, etc.

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zipper closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Volume (L)

Height (cm)

reflective

Attachment Type

Fastener Type

This bag can typically hold:
- One 700x35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700x25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5”x1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29”x1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This saddle bag is also available in a larger 1 L [1 qt.] size (ref. 8569836)

Sports/

Our Brands/

Rockrider/

decathlon

Inner Tube Patch Repair Kit