Time, distance, ascent, and position. Optional heart rate sensor.

Parameter measurement

Bluetooth/smartphone connection.ANT+ connection
Smartphone notifications

Connectivity

Autonomy

Waterproof

Easy reading

Cyclometer with GPS and automatic sync over Bluetooth. This GPS cyclometer is perfect for road, gravel, and mountain bike rides in areas without tree cover or tall buildings

Condition

Skill Level

Weight (g)

Screen Type

Heart Rate

Communication Protocols

Countdown Timer

Ipx Waterproofness

Without Cadence Sensor (Optionnal Accessory)

Cadence Sensor

Practice Conditions

Stopwatch Timer

Backlight

Battery Life In GPS Mode

Navigation Type

Autonomy (H)

Altimeter

Power Type

With its large 2 2/5" (6 cm) segment LCD HTN screen, the Van Rysel 500 GPS can display up to 6 cycling data points per screen page, allowing cyclists to keep a close watch on their status.The pages can be configured using the free OnelapFit app.

A large screen

With its Bluetooth and Ant + connectivity, it's easy to view your ride data. The OnelapFit app can be used to track your activities and sync them with Decathlon, Strava, and more.

Compatibility:
Heart rate monitor belt
Turbo trainer 
Power meter

The RC 500 GPS Cyclometer has a long battery life, lasting up to 16 hours. It can also be powered by external portable batteries, which allow you to charge it while it's recording. Which is really handy when you occasionally need more battery life!

Battery range

This feature lets you see your route by syncing with the free OnelapFit app.

The 500 GPS shows you your stats in real time (speed, average speed, current / average / max heart rate, odometer, gradient, pace, elevation %, training, and much more). 
GPS system: GPS + BeiDou + GLONASS + Galileo

GPS tracking features

The 500 GPS automatically adjusts how it displays data when it detects paired sensors.

Automatic display of ASD sensors.

No software needed to convert data files. Training files are automatically saved in FIT format (compatible with Strava) and can be uploaded to popular cycling apps and websites including Strava, TrainingPeaks, Endomondo, Map My Ride, Fit Track, and many others. 

Synchronization with Strava and all your favourite apps.

Take advantage of the synchronization with the OnelapFit app: You can sync your training rides directly from the device to the OnelapFit app over Bluetooth. You can then use the graphs to track your progress and share your sessions on social media. Simple configuration and automatic synchronization with Decathlon, Strava, and other apps.By syncing to your Decathlon account, you'll join the Decathlon loyalty programme!

Sync with the Decathlon app

GPS: Highly sensitive chip.
Waterproof: IPX5
Alerts and notifications: Yes. 
Historical log: 30 hours in 1-second mode; 120 hours in smart record mode. 7 zones. 
Operational temperature: -10°C to ~50°C

Specifications


Turbo trainer
Heart rate monitor
Pace sensor
Speed sensor
2-in-1 speed and pace sensor
Power sensor

Compatibility (not included)

Cyclometers & Cadence Sensors

Stability

Compatible with bikes equipped with bottle cage screws.

Compatibility

Designed for carrying a water bottle on your bike.

Assembly Type

Position

Main Material

Bike Hydration

clearance

Very thin material for better moisture management.

Moisture management

Elastic bands at the ankle, the arch of the foot, and the tibia.

High-quality technical socks that go up to the base of the calf.

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

Weather Conditions

Style

Packaging

Sock Height

Socks developed in collaboration with Trerè Innovation srl in Italy to meet the needs of the most demanding cyclists; inspired by the products worn by professional cyclists. 


Development 

Mid-rise sock measuring 20 cm (8") high in size 6½-8.
The height doesn't vary much between sizes.

Sock height

Men's Socks

Quickly and easily clean any type of chain with a single cleaner!

Using the chain cleaner is quick and easy, and becomes a real pleasure.

Ease of use

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Frequency

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

How to use this product: 

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

How much degreaser should you use?

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Maintenance advice: 

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

Bike Tools

onlyonline

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Easy assembly/dismantling

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Robustness

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

Volume (ml)

reflective

Attachment Type

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

The screw top and mouthpiece ensure a watertight seal.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Limits taste and odour

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Graduated scale makes it easy to track intake.

Precision

Compatible with our Water Bottle Cap (item code 8561474) for the mouthpiece.

Versatility

Compatible with all bottle cages on the market.

isothermal

Cap Type

There’s nothing worse than a plasticky taste or smell in a water bottle. But this occurs with most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is flexible and has a neutral taste and smell. When blind-tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C[158°F]).

How to care for your water bottle

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Bike Tubes & Valves

Mesh inserts (ultra breathable fabric) on the sides

Breathability

Enter the world of performance with a jersey that weighs only 129 g in size M

Lightweight

Elastic sleeves and hem at the back provide a snug fit

Back: 3 regular pockets and one zippered pocket 
Sides: 2 pockets for trash

Pockets

This cycling jersey is part of the Racer range from Van Rysel. It's designed for male and female cyclists who want technical features and performance.

Maximum washing temperature 30°C. Normal cycle.

Intensity

Collar Type

sleeve length

anti-uv

Pocket

Introducing the new version of our Racer jersey. It's even lighter and more breathable than the previous version, making it perfect for your training rides and races! 

Our starting point was clear: we wanted a dedicated performance jersey that wouldn't compromise on either breathability or aerodynamics.
Mission accomplished with the 2nd-generation Racer jersey!

The 2nd version of our go-to racing jersey!

This jersey is unisex! 
The materials and pattern used will fit absolutely any body shape, whether you're male or female. 

The cut is close-fitting for a second-skin effect. 
The lightweight elasticated hem and its silicone band hold the jersey in place, no matter your hip width.

Unisex jersey

For this jersey, we've chosen ultra-light materials that keep you really comfy. 
Most of this jersey is made from a fabric called Amigo, which is extremely breathable and lightweight. 

The sides and arms are made from mesh to let plenty of air through and keep you nice and cool.

An extremely light, breathable jersey

Ride outdoors in even the hottest weather without feeling damp from sweat. 

We've used a thin, breathable, anti-UV fabric on the front and back of the jersey to keep you cool, comfortable, and protected from UV light.

Ultimate comfort for seasoned cyclists

Every technical aspect of this jersey has been designed to take you to the next level under the best conditions:
- Ventilation: mesh sides and sleeves.
- Pockets: 4 back pockets, including one with a zipper.
- Trash pockets: two trash pockets on the sides.
- Support: elastic at the waist and wrists for an excellent fit.- Length: shorter to stop it creasing at the front when you're in a racing position and sagging at the back when your pockets are full

Design choices that make a difference

The Pro Fit cut is designed for sport cyclists who want something close-fitting.
This aerodynamic cut gives you a second-skin effect that boosts performance.
The Racer range also features sleeves that cover almost all of your biceps.
Unisex jersey that fits both men and women.

If you want to get this Racer jersey but prefer a slightly looser fit, we recommend buying the next size up.

Pro Fit

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not use bleach. Do not place on a heater to dry. 

Care instructions

Men's T-Shirts & Tank Tops

Close-fitting cut and wide elastic bands around the hem.

Keep warm riding on cold days. Racer is Van Rysel’s flagship range, made up of products designed for cyclists who want to push their limits. 

van rysel

Garmin-Compatible Front Cyclometer Mount