simply attach to harness tie-in loop using a cow hitch

Ease of use

dynamic lanyard capable of absorbing potential fall at anchor

Durability

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Versatility

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Condition

Skill Level

Number of Carabiners

Main Material

Bags & Ropes

Keylock locking mechanism makes it easier to use.

Easy opening/closing

Lightweight

This carabiner is designed for connecting a belay system to a harness or for ensuring climber safety during rope manoeuvres.

Carabiner Shape

Lock type

Type of Snap Hook

Gate Opening

Strength:
Major axis:  30 kN
Minor axis:10 kN
Open gate: 10 kN

Technical features

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

Guidelines for use

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018

Certification

Gear

1 adjustable carry strap for easy transport. 
2 compression straps. 

Easy transport

No need to refold your rope after each session thanks to these 2 straps.

Heavy-duty cover (600D polyester) protects rope from the ground.

Flexibility

Designed to hold up to 100 m (110 yd) of rope.

Capacity

This bag is designed to hold and protect climbing ropes for indoor or big wall climbing.

Waterproof

Weight (g)

Number of Pockets

Type of Cover

Foldable

carrying system

Number of Compartments

Fastener Type

Weight

onlyonline

Seam resistance is greater than a webbing knot.

Abrasion resistance

Breaking resistance

Available in 3 lengths (60, 120, & 175 cm [24/47/69"]) depending on your needs.

Tubular ring for multiple uses in mountaineering, climbing, and all vertical sports.

Diameter

Rope Length (cm)

Adjustable Length

Style

Hook Type

Elastic

Length (cm)

Product certified in line with the EN566:2017 standard

Standards

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

Anti-Cross-Loading

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

Red visual indicator is visible when carabiner is open.

Strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

UIAA Dry  hydrophobic treatment core and sheath. PFC free.

At 39 g per metre (1 1/3 oz. per yard), you won’t even feel it in your backpack.

This thin rope is smooth, light and compact.

Ergonomic grip

Absorbs fall force well with 7 kN impact force rating.

Stretch

Meets two standards: Half rope and twin rope.

Compact and lightweight, this dry core rope is perfect for easy alpine snow climbs, glacier trekking, ski touring, or setting up a handrail.

Floatability

Type of Climbing Rope

Weather Protection Type

Rope Length (m)

The sheath and core have a water-repellent finish so the rope stays dry.
Less than 2% water retention.
The mechanical features help the rope last longer in cold and wet conditions.

UIAA Dry treatment:

Special treatment makes the rope smoother.

Plasma fluid treatment:

39 g/m (1 1/3 oz./yd)

Please note: Rope weights are set according to the EN 892 standard.
For example, a single rope must hold 10 kg (22 lbs) for 1 minute under specific temperature and humidity conditions.
This determines the rope’s actual weight, which is often superior to the weight given by the standard. 
The weight according to the standard is used to compare two ropes.

Weight:

Number of falls: 6/12
Impact force: 7/10.6 kN
Dynamic elongation: 28.5%/27.6%
Static elongation: 8.7% / 4.6%
Sheath slide: 0
Number of spindles: 32

Number of falls: 

It’s important to properly care for your rope to reduce wear.
We recommend the following:
1- Use a rope cover.
2- Wash off dirt under lukewarm water. 
Should stains persist and you want to wash the rope with soap, it is important to use a pH-neutral soap (such as Marseille or household soap) and then rinse thoroughly with clean water.
3- Air-dry away from sunlight and heat sources.

Washing the rope:

Store in a cool, dry place away from direct light and corrosive agents. Never leave your rope in a car on a hot summer day.

Storing the rope:

It’s important to check your rope regularly. Run it through your hands and inspect it metre by metre. This will allow you to spot any nicks, cuts, or weak spots. If you notice any abnormalities, if the core is visible, if the rope is deformed or if the rope has exceeded its fall rating, it must be replaced.  Take safety seriously!

Inspecting the rope:

Stds/Certif.

Comfortable between 0°C and -10°C. Down with a fill power of 800 cuin. 

Warmth

Compact design

Outer fabric treated to prevent water infiltration.

Water repellent

Outer fabric with reinforced mesh stops tears from getting worse.

2 hand pockets, 1 zipped chest pocket, 2 inner pockets.

Pockets

Down jacket with hood for trekking in cold weather down to -10°C.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Frequency

sleeve length

Air Temperature

Windproof

Pack

Pocket

type of hood

thumb pass

Type of Length

Hood

When worn as a third layer, this padded jacket has been certified for an active comfort temperature of -10°C during a standardized test in a thermal chamber. The model is wearing a synthetic, long-sleeved shirt and a light fleece underneath. It works with a simulated 5 km/h wind. We also tested this product in static mode; the comfort temperature is 0°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking: 
- Thermal insulation, because of the air trapped in the down and feathers.
- Ultra-lightweight: down wadding is lighter than synthetic and provides the same warmth. This saves more weight in your backpack.
- Ultra-compressible.

The advantages of down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches). Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation. This jacket is filled with 90% down and 10% feathers and has a guaranteed fill power of 800 cuin (international standard) or more.

Measuring the fill power of down and feather filling

XS: 122 g (4.3 oz)
S: 131 g (4.6 oz)
M: 140 g (4.9 oz)
L: 149 g (5.2 oz) 
XL: 159 g (5.6 oz)
2XL: 170 g (5.9 oz)
3XL: 181 g (6.3 oz)
4XL: 192 g (6.7 oz)

Filling weight

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
Our advice: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Use a gentle spin cycle. 
2. Tumble dry with 2 or 3 tennis balls; repeat 2 or 3 times until completely dry.

How to care for down jackets

This fabric is water-repellent. Water repellency keeps the fabric lightweight and warm. It is recommended to wear a waterproof jacket over top in the rain. Treatment on the outer surface achieves water repellency, but the treatment can deteriorate with use. We recommend restoring it after each wash.

Water repellency (different from waterproofing)

After washing, we recommend using a water-repellent spray to prevent water absorption. This renews water-repellent properties and improves performance throughout the garment’s life cycle.

Restoring water repellency

Snags are common during hikes. The good news is that it can be repaired to prevent further tearing and to stop feathers from escaping. Need help repairing? Don’t worry! Some Decathlon workshops offer in-store repairs.

Got a snag? How to repair your jacket

Men's Hiking Jackets

Impact protection

Ventilation

ABS shell construction protects helmet from everyday scratches

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Detachable Visor

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Helmets

Absorption

absorbing sweat from the CLIMBER'S hands.

type de craie

Can hold a maximum of 600 kg without breaking.

Ideal for securing accessories when climbing or mountaineering.

5 mm diameter low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Diameter:

Static strength:

- Please note that this cord is static
- It should only be used as a backup for climbing, mountaineering, caving, or working at height.
- It will not absorb energy.
- It should not be used as a belay rope.

Restrictions of use:

Standards/certification

Chlorine resistance

Can hold a maximum of 400 kg without breaking.

A low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

the rubber part keeps the karabiner in line with the major axis for safety

Designed for clipping into anchors on the crag, or to secure a route for alpine rock climbing.

Type of Harness Tether

Highly resistant to repeated folding and high levels of friction.

Elastic cordelette to really bite into narrow ropes.

Compatibility

Extremely lightweight—30 g compared to mechanical systems.

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

Keylock® System. Bent and straight gate.

This carabiner was designed for making a quickdraw or attaching an accessory to your harness.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner's main body. This new system replaces the strip system. It has the advantage of being more reliable during the assembly phase and in use (no more jumping slats). This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Strength:
Major axis:  22 kN
Minor axis: 8 kN
Open gate: 7 kN

Clean the carabiner with fresh water and dry away from sources of heat. Oil the gate regularly to make sure it's working properly. Do not use chemicals.
For more details, refer to the instructions for use.

Wide opening makes it easier to run rope and belay devices through.

BLC system for attaching carabiner to harness tie-in loop in line of major axis.

This screwgate carabiner is designed for hooking a belay system up to a harness when climbing or mountaineering.

simond

11 cm Mountaineering Quickdraw - Klimb