Name: 13" Inflatable Paddle Board - 500 Green
Brand: ITIWIT
SKU: 2722580
Price: 700 CAD
Availability: InStock
Rating: 5 (5 reviews)

clearance

A wide, thick board for maximum stability.

Stability

Dimensions when folded: 90 x 40 x 16 cm. Inflates to 15 psi in 5 minutes.

Compact design

Product can be repaired in more than 80% of damage cases.

Eco-design

Impact-resistant glued dropstitch PVC construction.

Robustness

Easy transport

Foam deck for comfort and grip.
EVA foam handle

User comfort

Comes with a comfy carry bag with padded shoulder straps.

Carrying comfort

Recommended for one person weighing less than 80 kg.
Maximum load: 230 kg

Weight

Designed for half-day trips for beginners weighing 60 (132 lbs) to 80 kg (176 lbs). The pump and the paddle are sold separately.

Skill Level

With Handle

Frequency

leash

sold in pack

Weather Conditions

Sportsperson’S Weight

Board Type

Sup Type

Recommended user weight:

Less than 60 kg: ultra-stable board.
60–80 kg: an ideal starter board.
Over 80 kg:if you’re a beginner, go for an 11′ board.

Max load: 230 kg.

Recommended user weight:

Inflation:
Make sure the orange valve pin is in the upright position.
Connect the pump.
Inflate to 15 psi. 
The more you inflate the SUP, the more stable it becomes.
Disconnect the pump and close the outer cap.

Deflation:
Push down on the valve pin to let the air out.
Stand back and keep away from your face.
Remove all air by rolling up from the side opposite the valve.

Inflating and deflating your SUP

Fins and fin bases are available from our after-sales service and website
SUP fin reference: 8403374

Always remove the fin once you’re on shore.
If possible, rinse the fin base before and after use.

Fold up from the fin base, following the dotted lines to avoid damage.

Fin and fin base

Never unscrew the valve to deflate your SUP (may cause injury).
If the valve leaks, deflate your SUP and tighten it a quarter turn using the valve wrench.
If you need to replace the valve, please contact the workshop at your nearest Decathlon store.

Maintenance tool

Inflated SUP:
Length: 10′ (305 cm)
Width: 32″ (81.5 cm)
Thickness: 5″ (12.5 cm)
Volume: 244 L
Weight: 9 kg (+/- 10%)

Stowed, folded SUP:
Height:  90 cm
Width: 40 cm
Thickness: 20 cm

There’s enough room in the bag to fit a pump and an adjustable split paddle.

Technical dimensions

We sell a stand-up paddle board repair kit (ref. 8512384).
Please contact your local service department for repairs.

Repair

If you fall, your leash prevents the board from drifting away. It’s best to attach it to your ankle, but it can also be attached to the knee.
Remove and rinse after each use.

Leash

You’ll love sailing with this inflatable SUP! It can be attached using the lines without obstructing or damaging the deck. The leash makes it easy to launch, and users can paddle around anchored boats. It’s a great sport for all ages.

Great for sailing

Tow your board using the front towing ring (no load). 
You can also attach your board to a dock or other anchor.

Safety

Board
Fin
Leash
User guide
Repair patch
Valve tightening tool (use only when deflated)

Bag contents.

We recommend the use of a buoyancy aid (ref. 8501295) or a flotation belt (ref. 8600104).

Recommendations

Stand-up paddle boards

Adjustable

Profiled blade for ease and stability: 565 cm² (87 sq in).

Ease of use

Features a removable handle (89 cm) for storing in a bag or car trunk.

Lightweight

Assembled paddle floats for at least 1 minute.

Buoyancy

This adjustable split paddle is designed for beginner SUP enthusiasts looking to cruise or surf small waves.

Paddle Type

To adjust, open the latch, pull the handle to the desired length, and then close the latch. The alignment rail ensures that the handle is properly in line with the blade.
If the handle isn’t secure enough, open the latch and tighten the metal screw.

The paddle length should be around 15-20 cm above your head, e.g.,
a person who is 1.90 m tall adjusts it to approx.
2.10 m; a person who is 1.50 m tall adjusts it to 1.70 m.

Adjustment

To disassemble the paddle, push in the pin on the back of the tube and pull apart.
Disassembled paddles can be easily stored in the SUP bag or the trunk of your car.
The disassembled paddle is 89 cm long.

Disassembly

For better grip, apply a small amount of wax to the handle.

Grip

Max. usage size: 220 cm 
Min. usage size: 170 cm
Disassembled size: 89 cm
Weight: 960 g
Tube diameter: 3 cm
Paddle surface: 565 cm² (87 in²)
Paddle width: 18.5 cm (7.3”)

It is important to rinse your paddle with clean water after use. 
To prevent salt build-up on the tightening bolt, push pin, and inner tubes, rinse the paddle in warm water. This will improve the paddle’s lifespan. 

In case of breakage or loss, blades are available from our after sales service (Ref: 8648642).

Maintenance

A good paddle is crucial for returning safely to shore. This paddle is only designed to float for a minute, so never leave it floating in the water, or you’ll risk losing it.
If you take a break, leave your paddle on the board, preferably tied to the leash.

Paddles, pumps and accessories

86 cm wide and 15 cm thick board for maximum stability.

Dimensions folded in the bag (96 x 40 x 16 cm). Inflates to 15 psi in 6 minutes.

Fits up to 2 people. 
Maximum load: 320 kg

Developed for beginners over 80 kg (176 lbs), this stand up paddle for half-day outings. The pump and the paddle are sold separately.

Recommended user weight:

Less than 60 kg. ultra-stable board. 
60 to 80 kg: very stable board.
Over 80 kg:an ideal board for beginners.

Maximum load: 320 kg.

Don’t store your board in direct sunlight.

If your board must be left in the sun, keep it away from spaces that radiate heat (e.g., walls, ground, car roof) and reduce the pressure to 10 psi to avoid excessive pressure and irreversible damage (e.g., explosion, detached seam, leak).

Storage

Inflated:
Length: 11’ (335.5 cm)
Width: 34” (86.5 cm)
Thickness: 6” (15 cm)
Volume: 335 L
Weight: 10.5 kg (+/- 10%)

Bag:
Height:   97 cm
Width: 40 cm 
Thickness: 20 cm

The bag has room for a pump and a paddle.

It sits 6” off the water so you stay dry when paddling in calm conditions.

Stay dry

Perfect for doing yoga on the water without getting wet, thanks to its stability and height.

Yoga

Our handy guides are available online:

https://www.itiwit.co.uk/all-stand-up-paddle-advice

Please note:
It’s best to protect your board with a towel.

SUP with your pet

This incredibly compact board fits into a small backpack.

Designed for users up to 130 kg.
Maximum load: 315 kg

Ultra Compact: Carry it on your back, on foot, by bike, skateboard, etc.

Our team developed this ultra-compact stand-up paddle board for users weighing up to 130 kg. It’s light enough to take anywhere!

Recommended user weight:

Less than 60 kg. stable board.
60 to 80 kg: very stable board. 
Over 80 kg:Stable board.

Can be used by more than 1: 1 adult + 2 kids or 2 adults (seated/standing) 

Maximum load for avoiding falls in the water: 315 kg.

Recommended user weight and maximum load

Inflation:
This SUP is equipped with a new-generation valve for more security. 
To inflate, open the valve and connect the pump (“In” mode).
For best results, inflate to 15 psi.
Disconnect the pump and replace the cap.

Deflating:
Turn the valve cap 90° clockwise (“Out” mode).
Remove all air by rolling up from the side opposite the valve.
Close the cap.

Fully deflate the board.
Roll up the product to push the air out through the open valve.
Unroll the board and lay out flat. Fold it lengthwise with the fin bases positioned outwards.
Roll up from front to back.
Use the compression strap to keep it rolled up so that it fits into the bag.
For more details, check out our videos on the product page.

How to get a compact fold

Two 118 mm fins for paddling in shallow waters.
Available through our after sales service and online (8502106).
 Remove the fins once you’re on shore.
Always protect your hands if you need to apply force to the rear of the fin to remove it.
If possible, rinse the fin bases before and after use for easier installation and removal.

Fins and fin bases

Eco-friendly innovations have

reduced the CO2 impact of this product by 15%. We use a lighter drop stitch that’s better suited to the shape of the board and uses less

material. We’ve dope-dyed 50% of the backpack,
a process that involves dyeing thread as it is being produced, rather than by soaking the fabric in large dye baths. Dope dying allows us to use less water and generates less wastewater and CO2.

Inflatable board:
Length: 10’ (305 cm)
Width: 35” (89 cm)
Thickness: 6” (15 cm)
Volume: 325 L
Weight: 8 kg (-10%)

Folded:
Height:60 cm
Width: 38 cm
Thickness: 22 cm

Comes with a 30 L carry bag that fits a pump and paddle on the outside

We sell a stand-up paddle board repair kit (ref. 8512384).
Please contact your local service department for repairs.
Fins, handles, valves, and significant leaks can all be repaired.

Board repair services

A lightweight, easy-to-store leash that you’ll barely even know is there.
If you fall, your leash prevents the board from drifting away. 
To avoid damaging to the leash or board, remove and rinse after each use.
This leash attaches to the ankle.

Note: do not use the leash in rivers.

Storage backpack,
compact board,
2 fins,
leash,
instructions,
repair patch

We recommend:
We recommend the use of a buoyancy aid (ref. 8501295) or a flotation belt (ref. 8600104)
  Not suitable for paddling further than 300 m from shore.
Don’t use the leash on the river.
Notify someone of your trip and location.
Make sure to familiarize yourself with any local navigation rules in the area.

Directions

Remove the fin and leash, deflate, and store flat away from sunlight. If storing inflated, release some of the pressure and store flat with no load.

When not being transported, the board can be stored inflated or rolled lengthwise.

Compact Board Storage

Redesigned for easier storage.
Features comfortable padded straps,
a side pocket for a compact paddle (8643049),
and two elastics to hold a pump.

Backpack

Don’t store your board in direct sunlight.
If your board must be left in the sun, keep it away from spaces that radiate heat (e.g., walls, ground, car roof) and reduce the pressure to 10 psi to avoid excessive pressure and irreversible damage (e.g., explosion, detached seam, leak).

For 2–3 people, maximum 230 kg (507 lb.).

Volume

Inflate in 10 minutes to 1.5 psi (0.1 bar) with a double-action hand pump.

Easy assembly/dismantling

Air chambers and inflatable floor for good stability.

The bow is shaped for smooth gliding. 3 keels.

Glide performance

A fun kayak you can fit in the trunk of your car. Comfortable and stable, perfect for family outings. The pump and the paddle are sold separately.

Maximum Load

Number of Users

Kayak Type

Place of Practice

Inflated
Length: 382 cm (12'46'')
Width: 108 cm (3'5'')

Folded in bag
Height:  73 cm (2'4'')
Width: 44 cm (1'4'')
Thickness: 33 cm (1')

Weight: 17 kg (37.4 lbs)
Max pressure: 0.1 bar (1.5 psi)

Seats: 2 or 3

Dimensions and weight

Includes: 
- Kayak
- Backpack
- Keels

Attention: the pump is not included.
Use with Itiwit double-action hand pump and adapters

What's in the bag

The front and back seats are raised for increased comfort when paddling.
Position the seats using the markings printed on the floor. 
For 3 people, place atop the 3-seater symbols. For 2 people, place atop the 2-seater symbols.

Seat comfort

Includes a carry backpack and
clip-on fins.

Deflate by unscrewing the 3 Boston valves.
Fold the air chambers onto the floor.
Roll, starting from the side opposite the valves, to remove all air.
Place the rolled-up kayak into the backpack’s main compartment.
Close the zip and tighten using the compression strap.

Easy to disassemble and fold

Inflate the floor, then the first air chamber. Partially inflate the second chamber. Check their positioning.  Fully inflate the kayak without exceeding 0.1 bar (1.5 psi).

Do not overinflate.

Close all the valves.
Install the 3 keels, unless you’re kayaking on a shallow river.

In extreme heat, slightly deflate the kayak on shore to avoid overinflation, which could damage the kayak. For the same reason,
Do not leave inflated in the sun.  

Inflation recommendations/precautions

Patented bow shape: the nose and tail provide good glide. The V-shaped nose helps the kayak cut smoothly through the water.

If one of the air chambers becomes damaged, unzip the outer layer and remove it.
You can uncover the floor by undoing the rip-tab fastenings.

Example 1: An air chamber is punctured. Patch the hole using the repair kit.
Example 2: There’s a hole along a seam. Visit a Decathlon store workshop to exchange the air chamber (2-year warranty).

Care instructions

We recommend wearing a buoyancy vest while kayaking.

Directions for use

Restrictions

Kayaks

For 1–2 people, maximum 195 kg (430 lb.).

Inflates in 8 minutes with a dual-action hand pump.
Compacity of the kayak.

Air chambers and wide inflatable floor for good stability.

Comfy raised seat for resting and paddling.

Dropstitch floor. Tarpaulin air chambers, pressure relief valves.

Quick drying

Inflatable touring kayak designed for beginners can accommodate 2 people for navigation in calm waters. 
Returns/exchanges within 365 days for members.

Inflated
Length: 365 cm (11'9'')
Width: 103 cm (3'3'')

Folded in bag
Height: 67 cm (2'2'')
Width: 40 cm (1'3'')
Thickness: 30 cm (1')
Weight: 16 kg (35.2 lbs)
Max floor pressure: 0.34 bar (5 psi)
Air chamber/seat pressure: 0.2 bar (3 psi)

Number of seats: 1 or 2

Includes:
- Kayak
- 3 fins
- User guide
- Inflation connector
- Strap 

Attention: the pump and the paddle are sold separately.
Use with Itiwit double-action hand pump and adapters.

The high seats provide increased comfort when paddling.
Position the seats on the floor using the rip-tabs under the seat and on the floor.
Stow any bags or equipment in the kayak’s rear hatch or attach to the rear deck.
Your kayak is ready for launch!

Seat comfort and positioning

Always fold the kayak on a clean surface. Remove the fins.
Deflate the air chambers. Valves are located at the back of the kayak. Please note: Do not unscrew the pressure relief valves at the front.
Fold the floor.
Fold the rest of the kayak in half lengthwise. Flatten the front fin base.
Lay the rolled floor on the front end. Roll the kayak toward the rear.
Strap the kayak.

Disassembly/folding

To connect the Itiwit pump (sold separately), twist the pump adapter 1/4 turn. Inflate the floor to 5 psi. Screw on the cap.
Place the floor inside the kayak. Strap down the ends. Align the floor valve with the air chamber valves at the back of the kayak. Position the floor to allow free access to the drain plugs in the middle of the kayak.

Inflation tips and floor positioning

To connect the Itiwit pump (sold separately), twist the pump adapter a quarter turn. Inflate the floor to 3 psi. Screw on the cap. Each air chamber has a pressure relief valve for evacuating excess air due to overinflation. When this happens, you may notice a hissing sound. This sound is normal and can occur during inflation or after prolonged sun exposure. It will stop once the pressure has been corrected.

Inflation tips

The dropstitch floor provides rigidity. Dropstitch material consists of 2 layers of PVC connected by thousands of polyester threads. When inflated to high pressure, these threads become taut, preventing the kayak from losing its shape.
This is what makes our inflatable kayak extremely rigid but easy to stow in a wheeled bag once deflated.

Clean and dry your kayak before storing in a dry, shady place that’s protected from significant temperature changes.
The kayak can be stored folded, but storing flat and slightly inflated will extend its life.

Remove the seats and slightly deflate the floor for easier rinsing.
Rinse the kayak, floor, and seats with clean water after use to avoid damage from sand, salt water, and sun.
Open the drain plugs located at the centre and rear of the kayak. Tip the kayak to empty out the water. 

This compact board fits into a small 30 L backpack.

Designed for a maximum weight of 60 kg.
Maximum load for buoyancy: 180 kg

Ultra Compact: carry it on your back, on foot, by bike, skateboard, etc.

This stand-up paddleboard is perfect for beginners weighing up to 60 kg. A lightweight SUP that you can take anywhere! 

Recommended user weight:

Less than 60 kg. beginners will easily get into stand-up position on calm bodies of water.
60 to 80 kg:We recommend the larger size (9’) for more stability.
Over 80 kg: This model is not for you; try our larger size (L).

Maximum weight to be able to stay afloat = 180 kg.

Inflating:
This SUP is equipped with a next-generation valve for more security. 
To inflate, open the valve and connect the pump (“In” mode).
Inflate to 15 psi for best results.
Disconnect the pump and replace the cap.

Deflating:
Turn the valve cap 90° clockwise (“Out” mode).
Remove all air by rolling up from the side opposite the valve.
Close the cap.

Fully deflate the board
Roll up the product to push the air out through the open valve.
Unroll the board and lay out flat. Fold it lengthwise with the fin bases positioned outwards.
Roll up from front to back.
Use the compression strap to keep it rolled up so that it fits into the bag.
For more details, check out our videos on the product page.

Follow our folding method for maximum efficiency.

Two fins for paddling in shallow water.

Replacement fins are available from our after-sales service and website (ref: 8502106).
Remove the fins after leaving the water.
Always protect your hands if you need to apply force to the rear of the fin to remove it.
If possible, rinse the fin bases before and after use for easier installation and removal.

Inflatable board:
Length: 8’ (244 cm)
Width: 30” (76 cm)
Thickness: 5″ (12.5 cm)
Volume: 187 L
Weight: 6 kg (±10%)

Folded:
Height:   48 cm
Width: 31 cm
Thickness: 19 cm

Storage backpack 
Board 
Fins x 2
Leash 
Instructions
Repair patch

We recommend
using a buoyancy aid (ref. 8501295) or a flotation belt (ref. 8600104)
  Not suitable for paddling further than 300 m from shore.
Don’t use the leash on the river.
Notify someone of your trip and location.
Make sure to familiarize yourself with any local navigation rules in the area.

For 2–3 people, maximum 245 kg (540 lbs).

Inflates in 10 minutes with a dual-action hand pump.

Dropstitch bottom. Tarpaulin air chambers, pressure relief valves.

A beginners’ kayak designed for 2- to 3-hour trips in calm waters. It fits in the trunk of your car. The pump and the paddle are sold separately.

Width: 45 cm (1'4'')
Thickness: 37 cm (1'2'')

Weight: 18 kg (39.6 lbs)
Max floor pressure: 0.34 bar (5 psi)
Air chamber/seat pressure: 0.2 bar (3 psi)

Number of seats: 2 or 3

Includes:
- Kayak
- 3 fins
- User guide
- Inflation connector
- Strap

Attention: the pump and the paddle are sold separately.
Use with Itiwit double-action hand pump and adapters.

To connect the Itiwit pump (sold separately), twist the pump adapter a quarter turn. Inflate the floor to 5 psi. Screw on the cap.
Place the floor inside the kayak. Strap down the ends. Align the floor valve with the air chamber valves at the back of the kayak. Position the floor to allow free access to the drain plugs in the middle of the kayak.

To connect the Itiwit pump (sold separately), twist the pump adapter a quarter turn. Inflate the floor to 3 psi. Screw on the cap. Each air chamber has a pressure relief valve for evacuating excess air due to overinflation. When this happens, you may notice a hissing sound. Hissing is normal and can occur during inflation or after prolonged sun exposure. It will stop once the pressure has been corrected.


Dimensions: 274.5 x 73.5 x 12.5 cm.
Designed for users under 60 kg.

Size when folded in bag: 80 x 40 x 16 cm Inflates to 15 psi in 4 minutes.

Versatile pointed shape suitable for cruising and small waves.

Suitable for one person under 60 kg.
Maximum load: 190 kg

For beginners weighing less than 60 kg (132.2 lbs), perfect for half-day trips cruising or surfing small waves. The pump and the paddle are sold separately.

Recommended user weight:

Less than 60 kg: Perfect for beginners.
60 to 80 kg: Choose a board for intermediate paddlers.
Over 80 kg:We recommend our larger size (11’).

Maximum load: 190 kg.

To ensure excellent stability and glide along the water, we recommend not exceeding the maximum load of 60 kg.

Fins and fin bases are available from our after-sales service and website.
SUP fin reference: 8363793.

Always remove the fin once you’re on shore.
If possible, rinse the fin base before and after use.

Start folding up from the fin base.

Inflated:
Length: 9’ (274.5 cm)
Width: 29” (73.5 cm)
Thickness: 5″ (12.5 cm)
Volume: 197 L
Weight: 7 kg (+/- 10%)

Bag:
Height:   85 cm
Width: 30 cm 
Thickness: 20 cm

These dimensions leave room for the pump and a small adjustable split paddle.

Storage bay 
Board
Fin
Leash
User guide
Valve tightening tool (only use when SUP is deflated)

For 1–2 people, maximum 150 kg (331 lb.).

Inflate in 7 minutes to 15 psi (0.1 bar) with a double-action hand pump.

A beginners’  touring kayak for solo or tandem half-day trips. It also fits in the trunk of your car. The pump and the paddle are sold separately.

Inflated
Length: 340 cm (11'1'')
Width: 103 cm (3'3'')

Folded in bag
Height: 67 cm (2'2'')
Width: 44 cm (1'4'')
Thickness: 30 cm (1')
Weight: 14 kg (30.8 lbs)
Max pressure: 0.1 bar (1.5 psi)

Number of seats: 1 or 2

Includes:
- Kayak
- Backpack
- Keels

Attention: the pump and the paddle are sold separately.
Use with Itiwit double-action hand pump and adapters

The high seats provide increased comfort when paddling.
Place the seat(s) just behind the markings printed on the floor.
When tandem kayaking, use the “2” markings. When kayaking alone, use the “1” marking.
Make sure you balance your load to optimize kayak performance.

If one of the air chambers becomes damaged, unzip the outer layer and remove it.
You can uncover the floor by undoing the rip-tab fastenings.
Example 1: An air chamber is punctured. Patch the hole using the repair kit.
Example 2: There’s a hole along a seam. Visit a Decathlon store workshop to repair or exchange the air chamber.

31” wide, 6” thick, and reinforced for extra rigidity and stability.

Carefully designed shape for maximum glide.

Reinforced dropstitch construction for strength and abrasion resistance.

Dimensions when folded: 90 x 46 x 24 cm. Inflates to 17 psi in 8 minutes

12 g. Carry bag, 2 ergonomic handles, and 1 loading area.

Thermocompressed EVA foam deck for comfort and grip on the water.

Placement markers help you stand in the right place.

Ease of learning

Your board is 80% repairable at your Decathlon workshop.

For intermediate SUP boarders weighing less than 125 kg (275 lbs) to spend longer on the water. The pump and the paddle are sold separately.

Sports/

Water sports/

Paddleboarding/

Stand-up paddle boards/

itiwit

13" Inflatable Paddle Board - 500 Green