90% down and 10% feathers with hood guarantees maximum warmth

Warmth

3D mesh on the back and sides for good breathability

Breathability

3D mesh on back for maximum freedom of movement

Freedom of movement

Maximum protection: raised collar, hood that fits under the helmet

Flexibility

Two hand pockets and one inside chest pocket

Pockets

Compact design

Weight

Designed for high-intensity freeriding, this modular liner jacket provides thermal protection without restricting movement.

Snow Skirt

Ventilation Zippers

Condition

Skill Level

Frequency

reinforced area

Weather Conditions

sleeve length

Air Temperature

Windproof

Pocket

Pack

RECCO system

type of hood

thumb pass

Type of Length

Hood

Zipper Type

Main Material

Down jacket (90% down and 10% feathers) for comfort and lightweight.
Heat zones added where you need them most.
Stretch zones on the back, sides, and underarms for freedom of movement.
Breathable stretch fabric wicks away perspiration.
The hood fits under your helmet, and the high collar protects you from the elements.

Design

During intense physical exertion, dressing too warmly can actually make you feel cold. If perspiration can’t evaporate, it stays on your skin. Wear a liner jacket that you can take off in mild weather. Also make a habit of opening the vents before you get too hot and closing them before you get cold, like when you switch from exertion to inactivity.

Directions

To stay warm and dry, follow the 3-layer rule: 
first, a base layer; second, a liner jacket layer for warmth; and third, a ski jacket to protect you from bad weather.
The base layer keeps you dry by wicking perspiration away from the skin to the other layers.
The second layer provides warmth. It could be a down jacket or fleece sweater.

What should you wear under your ski jacket?

This layer protects you from weather (snow, rain, and wind) by keeping it out but still letting perspiration escape so you don’t feel wet. Ideally, it should be waterproof and breathable. The third layer also insulates, with lined pants or jackets, and complements the second layer.

Third layer

Ethical down certified by RDS (Responsible Down Standard). Our tracking system ensures that our feathers are ethically sourced. Our suppliers are committed to using only feathers from ducks bred for their meat. The feathers are plucked after slaughter.

https://textileexchange.org/standards/responsible-down/

*What is RDS certification?

This down jacket is filled with 90% down and 10% feathers. Fill power is a measurement of the down’s thermal insulation capacity based on its ability to trap a certain amount of air. Down with a higher fill power (a higher cuin number) takes up more space, traps more air, and therefore provides greater thermal insulation.

Down/feather fill power

The down’s long-lasting fill power gives it 3 important advantages for freeriding:
- Thermal insulation, because of the air trapped in the down and feathers
- Lightness, because down is lighter than a synthetic but delivers the same warmth and saves even more weight in your backpack

- Compressibility

What advantages do duck down and feather filling have?

Some tips: close all the zippers on your down jacket before washing (synthetics cycle at 30°C). 
 
Be sure to select a gentle spin cycle: a fast spin cycle creates clumps that are difficult to break up.
See our advice by clicking the link below:
visit our website

How to wash your down jacket

When you take your down jacket out of the washing machine, it will look as if the down has disappeared. The best way to restore loft and fill power is to tumble it dry. Put your down jacket in the dryer with 2 tennis balls for 2 or 3 drying cycles.
If you don’t have a dryer, you can always dry your down jacket on a clothes rack, regularly shaking it out and turning it over.
https://www.forclaz.co.uk/advice-alias/how-should-i-look-after-my-down-jacket-tp_2579

How do I dry my down jacket?

This product is repairable. We will repair your product free of charge for the term of the warranty. Whatever needs repairing (accessories, seams, zippers, etc.), visit your local store for service. 
If your product can’t be repaired due to a production defect, we will offer you an exchange or refund.

Your product is repairable.

Adult's Ski Clothing

Comfortable between 5°C and -5°C. Down with a fill power of 800 cuin.

Easily folds away into its left-hand pocket with a double-pull zipper.

Surface-treated outer fabric prevents water infiltration.

Water repellent

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

Abrasion resistance

This down jacket weighs approximately 430 g (15 oz.) in size L.

This down jacket keeps you warm during your cool weather hikes. Effective to -5°C for intense activity and 5°C for light activity.

Waterproof

Style

Worn as a third layer, this padded jacket has been certified for an active comfort temperature of -5°C during a standardized test in a thermal chamber. The model is wearing a synthetic, long-sleeved T-shirt and a light fleece underneath. Effective in simulated 5 km/h wind. 
We also tested this product in static mode: the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking:

- Thermal insulation, because of the air trapped in the down and feathers.
Ultra-lightweight: down is lighter than synthetic fill and provides the same warmth. This saves even more weight in your backpack.
- Ultra-compressible.

The advantages of duck down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches).
Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation.With an 85% down and 15% feather filling, this jacket has a guaranteed fill power of 800 cuin or more (international standard).

Measuring the fill power of down and feather wadding

A fabric’s water repellency is its ability to make water run off its surface without being absorbed.
This prevents the fabric from absorbing water and keeps it lightweight and warm. The fabric in this down jacket is water-repellent, although we recommend you wear a waterproof jacket over top in the rain. The fabric is made water-repellent by treating its outer surface, but the treatment can deteriorate with use. 
We recommend restoring it after each wash.

Water repellency (not to be confused with waterproofing)

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
 
In short: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Gentle spin cycle.

2. Tumble dry with 2 or 3 tennis balls and repeat 2 or 3 times until it is completely dry.

How to care for down jackets

Once you have cleaned your padded jacket, we recommend using a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water-repellent properties and optimizes its performance throughout its life cycle.

How do I reactivate the waterproofing properties?

Snags are common when hiking in a padded jacket. Simply mend it or apply an iron-on patch to prevent the tear from getting bigger and letting the synthetic fibres escape. 
Not sure about repairing it yourself? Don’t worry! Our in-store workshops offer a repair service to mend your padded jacket with an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 70 g
S: 76 g
M: 81 g
L: 87 g
XL: 94 g
XXL: 100 g
XXXL: 112 g

Filling weight

Jackets & Sweaters

Temperature rating = -29°C.
Duck down: 90% down, 10% feather

Fill power = 700 cuin (IDFB standard). Fits in "Stow" Pocket

Cut with armholes suitable for mountaineering.

Durable component on forearms (high-wear area).

Extend the life of your jacket with the adhesive repair patch included.

Repair

Our warmest down jacket! Down-filled and specially designed to protect mountaineers on their expeditions in extreme cold: down to -29°C

Type of Layer

Lining Material

Duck down containing 90% down and 10% feather with a fill power of 700 cuin (IDFB standard). The jacket's assembly has 3D partitioning.

  

Thermal insulation

Our jackets are lab-tested in a climatic chamber to establish the temperature ratings. 
For moderate activity in a 5 km/h (3 mi/h) wind, this jacket is suitable for temperatures down to -29°C.

Temperature rating use

This jacket contains: 
- 2 outer hand-warmer pockets. - 2 outer chest pockets accessible when wearing a harness + 1 flap pocket inside to hold a phone. 
- 2 mesh pockets inside the jacket to keep a spare pair of gloves warm or for a flask.

Down hood designed for wearing over your mountaineering helmet, adjustable with 2 systems at the front and back of the jacket.

Durable component has been selected to reinforce the jacket's forearms. Indeed, when mountaineering, these areas are subject to significant stress. The component selected is more robust than the main component of the jacket.

Reinforced forearms

- XS = 208 g (7 1/3 oz.)
- S = 222 g (7 4/5 oz.)
- M = 236 g (8 1/3 oz.)
- L = 250 g (8 4/5 oz.)
- XL = 270 g (9 1/2 oz.)
- XXL = 290 g (10 1/4 oz.)

Weight of down lining

Machine-wash your duvet jacket on its own at 30°C and with 5 or 6 tennis balls. Wring out/spin as little as possible. Next, dry it in the tumble-dryer with the same number of balls. Following these recommendations ensures your jacket will maintain its fluffiness. More information is available via the following link: Decathlon website

Washing guidelines

Clothing

clearance

10,000-mm membrane and taped seams keep you dry.

Hybrid, down, and body filling for a comfort temperature of -9°C

Breathable fabric and back ventilation strip.

Water-repellent exterior fabric does not get waterlogged.

Adjustable

5 pockets: 2 hand, 1 ski pass, 1 inner, and 1 mask mesh.

A soft, warm collar for protection and comfort.

User comfort

The automatic snow skirt means no adjustment hassles.

Ease of use

Do you ski regularly? This jacket’s down padding provides plenty of warmth.

Membrane Construction

type of waterproofing

Schmerber

Recognized for their excellent thermal insulation, down and feathers also offer a great warmth-to-weight ratio and compressibility. However, the warmth provided is a combination of the weight of down and feathers and the jacket’s expansion capacity. Together, they provide warmth and insulation from the cold. (Padding: 50% down and 50% feathers in the body, recycled wadding 100 g/m² at the bottom of jacket and arms, 60 g/m² on the collar).

What type of padding is used for warmth?

Your jacket’s waterproof zippers, snow skirt, high collar, and adjustable hood and cuffs offer superior insulation to keep you warm.

In addition to the fill, which components provide warmth?

We lab-test each of our products so that we can provide you with a value indicating the item’s comfort temperature. This comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The measurement indicated is that of the external temperature at which the testers were neither warm, nor cold. Of course, this perceived temperature varies depending on the intensity of the activity and the metabolism of the individual.

How is comfort temperature measured?

To make sure you stay warm and dry, we recommend using the 3-layer technique: 
- Layer 1 or base layer, to stay dry. 
- Layer 2 or insulating layer, to keep the heat in.
- Layer 3 to protect against the elements.

Staying warm on the slopes

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. This component has a waterproofing resistance of 10,000 mm resists the pressure of 10,000 mm of water.
For skiing, we advise components rated 3,000 mm to 20,000 mm. 
Plus, here at Decathlon, we lab-test all of our waterproof products. This product has a score of 3/5

How is the water resistance of a jacket measured?

The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This component prevents water from seeping in while wicking away perspiration. The membrane is unbeatable when it comes to keeping you warm and dry.

What is a membrane and what’s it for?

The 500 Ski Jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements (rain, snow, wind, etc.). To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers have to face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Which parts of the jacket protect me from bad weather?

Water repellency is a material’s ability to let water bead off the surface without being absorbed. This jacket features water-repellent components that improve its weather resistance. The exterior surface of the fabric is treated to make it water-repellent.

Why does my jacket need water repellency?

Bear in mind that the water repellency can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray evenly over the entire garment, then allow to dry for 10 to 12 hours.

How to reactivate your jacket’s water repellency

This jacket wicks perspiration away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric. The 500 Ski Jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

What is a breathable jacket?

Regular fit The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

How does the 500 Ski Jacket fit?

The snow skirt adjusts automatically, and adjustable cuffs block drafts and snow, especially in the event of a fall.

Keeping snow out if you fall

* Close all the zippers on the jacket
* Turn it inside out
* Machine wash at 30°C, delicate cycle with little detergent and no fabric softener.
Important: set to a very gently spin cycle (less than 800 rpm): too strong a spin could create feather balls that are difficult to undo.
 * Perform a second or third rinse cycle to make sure that any remaining detergent from the previous wash has been eliminated.

How do I wash my jacket?

Tumble dry (strongly recommended) 
* Gentle or delicate cycle. * Put 2 clean, ideally white, tennis balls in the drum of the dryer. 
* Dry on several long cycles to dry completely. 
* Shake the down between cycles to break up any clumps that formed during washing.
If you do not have a dryer, the process is longer (drying flat can take one to two weeks). Make sure you pat the jacket to avoid clumps (at least 4–5 times).

How to dry my jacket

Our traceability system guarantees the origin of the feathers in accordance with our commitment to use responsible materials. Our suppliers are committed to using only feathers that come from ducks that are raised for their meat and plucked after slaughter.

Where do the feathers come from?

Torso fill: 85% down/15% feathers (cuin 600). Arms: stretch fleece.

A slim fit and stretch components for freedom of movement.

Central zipper for regulating body temperature.

Ventilation

Designed for skiers looking for a very warm, light, and compact ski midlayer jacket.

Number of Pockets

reflective

modular

What is the fit of the 900 Midlayer Jacket?

* Close all the zippers on the jacket
* Turn it inside out
* Machine wash at 30°C, delicate cycle with little detergent and no fabric softener.Important:set to a very gently spin cycle (less than 800 rev/min): too strong a spin could create feather balls that are difficult to undo.
* Perform a second or third rinse cycle to make sure that any remaining detergent from the previous wash has been eliminated.

How to wash your midlayer jacket

Tumble dry (strongly recommended) 
* Gentle or delicate cycle. 
* Dry on several long cycles to dry completely. 
* Shake the down between cycles to break up any clumps that formed during washing.
If you do not have a dryer, the process is longer (drying flat can take one to two weeks). Make sure you pat the jacket to avoid clumps (at least 4–5 times).

How to dry your midlayer jacket

This 85% down/15% feather jacket has a guaranteed fill power of 600 cuin (European standard).
Fill power is a measure of the down’s thermal insulation capacity through its ability to trap a specific amount of air. Down with a higher fill power (higher cuin number) takes up more space, traps more air, and provides greater thermal insulation.

The fill power of a jacket: what is it? (cuin)

The down’s long-lasting fill power gives it three important qualities for winter sports:
- Thermal insulation, because of the air trapped in the down and feathers
- Lightness, because down is lighter than synthetic fill and offers the same degree of warmth 
- Compressibility

The advantages of duck down and feather fill

We commit to repairing your product free of charge for the duration of the warranty. This service is offered in stores, including for snags, seams, zippers, and more. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

This product is repairable

The model, 1.85 m (6’ 1”) tall, is shown wearing a size M.  
Measurements: 
Chest measurement: 104 cm (41”)
Waist: 104 cm (41”)
Arm length: 45 cm (17.7”)
Inseam: 80 cm (31.5”)

Choosing the right size

Components resist abrasion, tearing, and traction force.

Durability

10,000 mm-rated coating. Taped main seams.

Regular fit, freedom of movement even with a back protector.

90% recycled filling: body 80 g/m², sleeves and hood 60 g/m²

Breathable component that facilitates perspiration wicking (10,000 g/sqm/24 h)

4 pockets: 2 hand, 1 inner, and 1 chest. Integrated ski pass holder.

This jacket is designed for beginner snowboarders. It was specially designed to accommodate back protection.

Season

breathability (in RET)

Grey jacket:
The model in the photo is wearing a size M and measures 181 cm.
Measurements:
Chest measurement: 96 cm
Waist measurement: 83 cm
Arm length: 61 cm

Yellow jacket:
The model in the photo is wearing a size L and measures 180 cm.
Measurements:
Waist size: 99 cm
Arm length: 51 cm

To help you choose the right size

This product is repairable: We commit to repairing your product free of charge during the 5 years of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you. 
Find all the warranty details on our website. 

How does the product warranty work?

Our snowboard jackets are guaranteed for 5 years. We offer repairs if your jacket is damaged. Contact us on our website to learn more on how to get your product repaired.

We opt for components and assembly processes that make our ski and snowboard jackets as durable as possible.

How can I be sure that my jacket is strong and durable?

We are aware of our sport’s impact on the environment and are committed to reducing the impact of our products as much as possible to protect our natural playground. This jacket was developed with the following features:

- 90% recycled wadding
- Fluoride-free main material
- Lining with dope-dyed yarn

Our actions toward a more environmentally friendly design

Dyeing textiles uses lots of water, chemical products, and energy. But we love colour. To reduce this impact, we use the dope dyed technique where powder colour pigments are added when the yarn is produced (and not by soaking it in dye baths, as is usually the case). This reduces consumption and the discharge of wastewater from colouring our fabrics.

What is dope dyeing?

Despite our efforts, it’s not always easy to reduce our impact as much as we would like. For this product, we are striving to:

- convert the main component into a recycled component
- use dope dyeing for all components
- find out how to make a product waterproof with a recycled polyurethane coating
- make the coating separable (or have the same chemical composition) so the product can be recycled

What we’re not doing so well when it comes to our environmental impact

The product’s environmental impact is calculated across its entire life using a range of indicators. An ABCDE rating shows the environmental impact of a product. Put forward by ADEME, it takes into account production, transportation, usage, and waste generated at the end of a product’s life. Decathlon displays this information voluntarily to help you identify products with lower environmental impact.

Learn more at sustainability.decathlon.com

Our products’ environmental impact

The product’s components and assembly were designed to keep the water out and reduce wind chill. The waterproof rating is measured by placing the product in a special shower that replicates real-life conditions. Finally, we spent a few days snowboarding, in all conditions, to validate the product’s waterproofing.

How can I be sure my jacket will protect me in bad weather?

We improved the jacket’s waterproofing with taped seams, in addition to the waterproof fabric. These heat-bonded waterproof strips are placed on the seams inside the clothing to make it perfectly watertight. These waterproof seams are used in the areas the most exposed to snow (hood and shoulders).

Water often gets in through the seams. Does my jacket have taped seams?

The water-repellent feature makes water run off the fabric without seeping in because of a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 or 3 washes on average. All the waterproof jackets that we design for snowboarders are water-repellent.

What is the water-repellent feature of my jacket for?

A breathable coating in the form of a paste or liquid is applied to the fabric, creating a protective film. The breathable coating is a waterproof barrier that lets perspiration pass through.

Coated jacket: what are the advantages of the coating?

To keep you warm, we use wadding insulation. Wadding is a synthetic component made from polyester that stores air depending on the length of the fibres. Wadding can be standard, hi-tech, or silicone-coated, and each type has different properties (warmth, low weight, elasticity, etc.).

Sports/

Outdoor/

Climbing/

Clothing/

simond

Mountaineering Hybrid Jacket - Men