Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Ease of use

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

Tire Assembly

Condition

Skill Level

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

onlyonline

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

Compatibility

Easy assembly/dismantling

This bell ensures your safety when riding in a less noisy environment.

Frequency

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Main Material

Bike's Bells

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

clearance

Brush up against nature! The durable fabric won’t get snagged or wear out.

Resistant

Sitting comfort

Special regular cut and stretch fabric for riding comfortably.

Freedom of movement

Stability

With bike shorts that effectively wick away perspiration.

Moisture management

Take everything you need with you in the zippered pocket on the right thigh.

Pockets

Weight

These mountain biking shorts are designed for warm weather. Elastic waistband and secure pocket.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Duration

Intensity

Season

reinforced area

Number of Pockets

retaining strip

Weather Conditions

Place of Practice

Stitching Type

Practice Conditions

Pocket

Type of Length

Type of Bell

Style

Undershorts

Zipper Type

With Straps

Our model is 1.87 m (6’1") tall and weighs 77 kg (170 lbs). He is wearing a size M top and size L bottoms

Inside leg: 28.5 cm (11") in size L.

Model’s measurements

Built-in undershorts: Yes
Type of fastening: Buttons
Adjustable waist: No
Built-in waistband: No
Number of pockets: 1
Resistant to vegetation: Yes

In a nutshell

This foam pad is designed for occasional users wanting to improve at mountain biking. The support foam is soft with medium firmness. It provides good user comfort and protects the cyclist’s pressure zones for rides of up to 1.5 hours. 

Foam thickness: 13 mm (1/2”)
Foam density: 65 kg/m3 (4 lb/ft3)
Foam firmness: 25 kPa (3 1/2 psi).

A base layer with added comfort.

For carefree riding, plan ahead and keep the essentials handy:
- On your right, a secure pocket (17 cm x 15 cm [7" x 6"]) with a zipper that’s easy to open (even with gloves on!) so you can access items you need while riding with only one hand, such as your tissues, tire lever, etc.

One secure pocket

When mountain biking, gloves are often the last thing you put on and the first thing you take off. These shorts have a buckle on the waist so you can keep your gloves handy without putting them in your pockets. You can snap your ST 100 and ST 500 Gloves to the shorts with the press stud and keep them handy at all times.

Keep your gloves handy!

Find detailed info on care instructions for mountain bike clothing on our website

Care instructions

Based at the Btwin Village in Lille, our product design team constantly works to make Biking more comfortable for our users.
Our goal is to create products that respond to our users’ needs and promote a good Biking experience.


Product tests

Men's Sports Shorts

Good insulation against the cold (between 6°C and 11°C).

Warmth

Outer fabric offers wind protection as you ride.

Windproof

Outer fabric offers protection from drizzle or light rain.

Water repellent

Cycling comfort

Touchscreen feature lets you use your smartphone without removing your gloves.

Connectivity

User comfort

Gloves for cyclists riding in fall and winter conditions in temperatures between 6°C and 11°C. 

Waterproof

comfort temperature

Tightening Type

A product’s ability to protect against the cold depends on its thermal resistance and breathability. The higher the thermal resistance, the more body heat it retains while you ride.
During intense rides, perspiration on your hands can make them feel cold. We therefore recommend exercising at a moderate intensity in cold weather.

Product warmth

Waterproofness is a fabric’s ability to prevent rainwater from soaking through. 
Water repellency refers to a fabric’s ability to make water bead off its surface without being absorbed. The fabric soaks up little or no moisture, dries more quickly, and remains light. Water repellency also helps keep the outer surface cleaner.
Water repellency is obtained by applying a treatment to the fabric's external surface.
This product is not waterproof!

Water repellent component

Machine wash at 30°C. Synthetic cycle. Use minimal laundry detergent. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry.

Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users. Our obsession is to create products that meet the specific cycling needs of our users and eliminate hindrances to a good cycling experience.
We then test our products in the field, as we are convinced that only by subjecting them to real world conditions, like the ones you experience on your bike, can we continuously improve our products.

Winter accessories

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

12 lumens in white (continuous, flashing).
4 lm. in red (continuous, flashing).

Visibility

Cont. white 30h / flash. 50h
Cont. red 30h / flash. 50h
Batteries (CR2032 incl.)

Autonomy

White and red, 2 modes (continuous and flashing).
Universal elastic mount.

Versatility

This front or rear bike light is designed to keep you visible. Easy to use with its 2 modes, 2 colours, and elastic fastening system.

Weight (g)

Brightness (Lumens)

reflective

Lighting Type

Type Light

Sold In Set

Autonomy (H)

Hook Type

Power Type

Range (m)

Feedback from cyclists and other road users (drivers, pedestrians, etc.,) led to optimum features for cyclists’ visibility. 

With one purpose in mind: the cyclists’ safety.


Lights

Compatible with bikes equipped with bottle cage screws.

Robustness

Designed for attaching your water bottle to the frame.

Bike Hydration

Volume: 27 L (24 qt.), 2 comprts: 10 L+17 L (9+15 qt.)
Max. load: 7 kg (15 lbs).

Capacity

Adjustable pannier rack mounts (6 - 16 mm diameter) with fall preventer.

Water-repellent bag is waterproof with the cover provided.

Converts from a backpack to a double saddlebag in three quick and easy steps.

Lightweight

This bag is perfect for comfortably carrying work items, your laptop, and other belongings on your commute on foot or on your bike, in any weather.

Volume (L)

Height (cm)

Bag Type

isothermal

Options

Attachment Type

Panier Type

Number of Compartments

Weight (kg)

Fastener Type

Clever!Your backpack, perfect for urban cycling, transforms into double saddlebags for a pannier rack in 3 quick steps. Backpack: comfortable padded straps and back.
Saddlebag: the pannier rack attachment system adjusts to adapt to nearly all types of models.
The locking system holds the bag in place so that it doesn’t accidentally fall off or get snatched.
A built-in cover protects the backpack from getting dirty.

Use when biking or walking.

You particularly appreciated this design with the first version (ref. 8405450) which has been around for 2 years now. Based on your feedback we’ve made several improvements on this second version:
- a more modern design with 3 colours added
- increased front compartment volume
- hooks staggered to make the bag more compact
- rainproof cover with better coverage and easier access
- flat base to stand up when placed on the ground

Improvements

This bag is compatible with:
- a great majority of pannier racks on the market with a tube diameter between 6 and 16 mm (1/4 and 3/5")
- all our pannier racks available in the bike department at Decathlon.
- All bikes equipped with a pannier rack sold at Decathlon, except for one model (Original 920E 8586865) that only takes single bags.

Bag compatibility

Total volume of 27 L (24 qt.), divided into two compartments: one for your work things and one for other items (clothing, food, sports gear).
The rear compartment (10 L [9 qt.] volume) can carry any laptop up to 15" (foam protection). Large zippered pocket for folders and documents. 3 pen holders.
Front compartment (17 L [15 qt.] volume) equipped with 2 inner pockets to separate smaller items. Roll-top closure so you can adjust the volume.
1 easy-access zippered outer pocket.

Volume

Water-repellent bag with waterproof cover:
This built-in neon yellow protective cover keeps your bag and belongings protected from dirt and moisture when biking.
It also helps keep it clean and dry when worn as a backpack.

Is this bike bag waterproof?

The product has 2 slots for the clip-on lighting range.
Large reflective strips keep you visible at night.

The hook system on this bag can be replaced if it breaks.
You can order the replacement part yourself from our website or ask your local store to order it for you. https://www.decathlon.ca/en/search?query=BIKE%20RACKS%20&%20WALL%20MOUNTS.

The rainproof cover is also available from our after-sales service (ref. 8735438).

Repairability and spare parts

Wash the bag with soapy water. Never use detergent, alcohol, or any product that could damage the fabric.

Product care

Height (cm): 45 [18"] 
Width (cm): 34 [13"]
Depth (cm): 23 [9"]
Distance between hooks (cm): 13 [5"]
Max distance between the two bags: 16 cm [6"]

Dimensions

Laptop Backpacks

Stretchy enough to fit different head sizes.

Anatomic design

A lightweight product that's easy to wear in hot weather.

The perfect protection for cycling in warm weather.

Type of Beanie

Bike Helmets

Thermoformed rigid case: protects glasses from crushing and shocks.

Content protection

Microfibre wipe: prevents your glasses from getting scratched.

Abrasion resistance

Rigid case with thermoformed fabric shell to protect glasses. Zipper fastening.

Case Type

Material: Thermoformed EVA
Dimensions: 17 cm x 7 cm x 7.5 cm
Closing system: Zipper

EVA is a semi-rigid material that protects against impact, crushing and scratching.

Case

Quechua is committed to limiting the environmental impact of its products.  
While this product is not currently eco-designed, we are working every day to make it more responsible: eco-design, repairability, and sustainability are at the heart of our actions.

Our environmental approach

Sun Protection

Neoprene strap that retains the glasses on your face.

Sewn sleeves compatible with most glasses temples.

Strap designed for hikers seeking to retain their glasses.

Sportswear & Footwear/

Accessories/

Sunglasses/

Women's Sports Sunglasses/

decathlon

Photochromic Cross-Country Mountain Biking Glasses Cat 1-3