Waterproof coating for 2 hours of protection (5,000 Schmerbers), 100% WTP seams

Waterproof

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Breathability

The elastic waistband and loose fit make them easy to put on over pants.

Freedom of movement

Only weighs 146 g (5 oz.) in size 10–11 years.

Lightweight

Designed to protect your child from the wind and rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Pocket

Type of Length

Type of Bell

Schmerber

Main Material

Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: Little breathability.
 
Our product has a 12 RET rating.

Component breathability

A fabric is water-repellent when water slides off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (every 3 washes). 

Component waterproofing

Technical details

Kid's Hiking Pants

Double-sided microfleece. 200 g/m² density for optimal warmth. High collar.

Warmth

Polyester knit: lets the body's moisture pass through (RET=6.3). 
Full zipper.

Pockets

Machine washable at 30°C, quick drying, and crease-resistant.

Ease of Maintenance 

A zippered fleece jacket that will become your child's best friend for staying warm on outdoor excursions. 

pattern

Collar Type

Customization

Hood

Style

Zipper Type

A warm fleece is good, but a warm, stylish fleece is even better! This fashionable fleece has a colour block look your child will love. We also added 2 zippered pockets for kids to store small items safely. 

Your child will love this fleece 

Your kids need to stay warm during their outdoor activities. With this fleece, there's no need to worry. The fleece fabric traps air, creating an insulating barrier.

A fleece that parents will love

If their clothes are not breathable, kids can quickly get too hot when they’re playing. We selected a breathable fabric that wicks away moisture even at high activity levels so this fleece jacket remains comfortable.

A comfortable fleece for high-intensity exercise

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET of 6.3.

What is the RET index?

This fleece is available in the following sizes: 
- Age 7-8 
- Age 8-9 
- Age 10-11 
- Age 12-13 
- Age 14-15 

What sizes are available?

Wash the fleece at 30°C on a synthetics cycle to avoid damaging it. Wash it inside out with the pockets closed. To protect the fabric, do not exceed a 1,000 rpm spin speed. Do not tumble dry.

How should I care for this zippered fleece? 

Kids' hiking t-shirts

Comfort temperature:  -6°C
Limit temperature: -16°C.

Breathable and waterproof to keep your feet dry.

Tread with Snow Contact technology: sole materials and tread pattern for snow.

Grip

Easy dressing

The location and depth of the 3.5 mm (0.14”) lugs provide traction on snow.

Traction

Designed so your kids can enjoy the snow! Simple and effective for snowy outings.

Condition

type of lining

Removable Sole

Season

comfort temperature

Outsole Technology

Boots Type

Lining Material

Foot Width

Boot Height

Tightening Type

Fastener Type

We perform comparative studies in a thermal laboratory in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. Everyone feels the cold differently.Comfort temperature: Felt slightly cold and 70% of users experienced thermal comfort in the boots.
Limit temperature: Felt extremely cold and 10% of users found experienced thermal comfort in the boots.

Are these boots warm enough for winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) on the inside of a fabric that prevents water from entering, but allows moisture to escape.

How do these boots protect from outdoor conditions?

We made sure that your boots are waterproof by conducting lab tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. 

Are my boots 100% waterproof?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

Follow these principles for your winter activities. 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can get wet from condensation and perspiration.
If your boots are very wet, remove the insole, fill the upper with balls of newspaper, and change the newspaper regularly. The paper will absorb the moisture and dry them faster.
Never put the boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Toddler & Kids Hiking Shoes

This dual-material neck warmer effectively protects from the cold.

Two fabrics mean it can be worn six different ways.

Flexibility

When worn over the nose, it provides effective moisture wicking.

Moisture management

This neck warmer is practical and easy to use. The dual materials mean kids can easily adapt the warmth around the neck.

Maximum wash temperature of 30°C. Very delicate cycle.

Skill Level

Reversible

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Kids' & Babies' Winter Clothing

clearance

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

reflective

Beanie Length

Type of Beanie

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Protects from light rain. Water slides off and is not absorbed by the fabric.

Water repellent

Polyester knit: fabric lets through water vapour generated by the body.

Only 406 g (14.3 oz) in size 10–11 years.

Very pleasant liner fabric also used in the hood.

Softness

Stretch fabric for greater freedom of movement.

2 zipped pockets safely carry your belongings.

This warm, comfortable padded jacket lets kids get the most out of cold-weather activities.

sleeve length

Air Temperature

Pack

thumb pass

Water repellency is achieved by applying a treatment to prevent water from remaining on the fabric’s surface. 
Water rolls off without being absorbed so the garment remains light, breathable, and warm. This product is water-repellent, not waterproof.
This treatment should be reapplied to remain effective. Apply sprays on the outside instead of using additives during washing, as these additives can damage the product’s breathability.

Water repellency

Created in our international design centre at the foot of the Mont Blanc in France, this jacket is then manufactured by our suppliers in China and Bangladesh.
We collaborate closely with these partners who are experts in fleece manufacturing. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our fleeces come from?

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

Product design: our outdoor experts

Kids' Hiking Jackets

Comfort temperature: -4°C
 Limit temperature: -13.5°C

The breathable, waterproof membrane keeps your feet dry.

Snow Contact technology: optimal grip and traction on snow.

Perfect both in the city and shallow snow. The leather provides style and protection for everyday use.

Type of Shoes

Shoe Height

Playing Surface

We perform comparative studies carried out in a thermal laboratory, in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently.
Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users consider the thermal sensation acceptable on their feet.

Are my boots warm enough for winter hikes?

Your boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering but allows moisture to escape.

How do my boots protect me from outdoor conditions?

- Allow to dry away from a heat source. 
- On dry leather, brush with a stiff brush (horsehair and brass fibres) to remove mud and dirt.
- Use a crepe brush or nubuck eraser to remove stains.
For stubborn stains, clean with a brush and a little warm water and leave to dry.
- Brush again with a stiff brush.
- Spray a waterproofing product. This will give a shine to the leather and brighten up the colour.

How to care for nubuck leather shoes

Thermal comfort is a balance between warmth and breathability. Too much heat or not enough breathability lets moisture accumulate and cold set in. Designed with your activities in mind, this membrane prevents water infiltration on one side and lets moisture escape on the other.

Breathable boots for optimal thermal comfort

We made sure that your boots are waterproof by conducting laboratory tests that simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. We tested 3 levels of waterproofing: 2,000 flexes (approx. 4 km/2.5 mile walk), 4,000 flexes (approx. 8 km/5 mile walk) and 8,000 flexes (approx. 16 km/10 mile walk). This boot has been tested for up to 4,000 flexes, equivalent to an 8-km (5-mile) hike.

The boot’s traction depends on the number and shape of the lugs. The grip depends on the materials of the sole and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

What is the difference between traction and grip?

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding anti-slip crampons to your boots is the only way to ensure optimum safety.

What are the advantages of Snow Contact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements:  

Will my boots withstand regular use in the long term?

Boots can become heavy through condensation and perspiration if you wear them in wet conditions.
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and help them dry faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place instead.

Waterproof protection for 1 hour (5,000 mm) before washing; taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Ventilated back for greater comfort when hiking.

Ventilation

Weighs 312 g (11 oz.) in size 10–11 years.

This waterproof hiking jacket was designed to protect your kids from the wind and rain.

Maximum wash temperature of 40°C. Normal cycle.

Ventilation Zippers

Sportsperson’s Height

type of waterproofing

breathability (in RET)

Removable Hood

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 1092 standard).The higher the water pressure, the more waterproof the fabric. A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Windproof effect

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric.      
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured by our suppliers in Vietnam, Ethiopia, and Bangladesh.
These are partners that have genuine expertise in making our products and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

Comfort temperature: -4°C 
Limit temperature: -13.5°C

SnowContact technology: optimal grip and traction on snow.

Easy to slip on with their hook and loop adjustment and stretchy laces.

The location and depth of the 3.5 mm lugs provide traction on snow.

Boots for playing in the snowy wilderness or in the playground in winter. 

We carry out comparative studies in a thermal laboratory in walking conditions with low wind (5 km/h). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently. Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users consider the thermal sensation acceptable on their feet.

Will these boots be warm enough for your child’s winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very thin component applied to the inner surface of the fabric that prevents water from entering while allowing moisture to escape.
We tested this product in a laboratory simulating walking with the feet half immersed.
This shoe model was tested for up to 8,000 flexes, equivalent to 16 km of walking.

The material and tread of SnowContact soles are specifically designed for optimal grip and traction on snow. SnowContact soles are more effective on snow than traditional soles. When walking on ice, adding crampons to your boots is the only way to ensure optimum safety.

What are the advantages of SnowContact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, UV resistance, abrasion resistance of outsole and upper components, and accelerated aging.

To stay warm when hiking in the winter, we recommend: 
Warmth: wear warm socks (ideally with a good percentage of wool).
Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of your socks should correspond to the height of the boot—for more protection, choose higher socks.

Boots can become heavy if you wear them in wet conditions (through condensation and perspiration).
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and the boots will dry faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

Double-sided microfleece. A density of 200 g/m² ensures optimal comfort.

Polyester knit: allows perspiration to escape (RET = 6.3).

Only 176 g (6.2 oz) in size 10 to 11 years.

Compressible and can be easily carried in a backpack.

Machine washable at 30°C, quick drying and crease-resistant.

Easy maintenance

This fleece was designed to keep your children warm during outdoor activities in cool weather.

type of hood

The mission of the fleece component is to trap air thanks to the volume created by its texture (and the brushing of the knit).
This air acts as a natural insulator, keeping the body warm.

Fleece material: Insulates with air

We conduct lab tests to ensure the highest durability standards: an abrasion- and friction-resistance test to ensure that the fleece does not pill; a colourfastness test; and an aging test to ensure that repeated washing does not alter the fabric’s properties, thickness, or appearance.

Fabric durability

Created in our international design centre at the foot of Mont Blanc in France, this fleece jacket is manufactured by our suppliers in Vietnam and Bangladesh.
We collaborate closely with these partners who have specialist knowledge in fleece manufacturing. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

quechua

Kids’ Fleece Gloves - SH 500