clearance

Shoulder strap with ergonomic pad for comfort and stability.

Easy transport

The inside is made of polyethylene for increased protection.

Impact protection

A full-length zipper allows your skis and poles to be packed away easily.

Easy opening/closing

The rolltop lets you adjust the bag to the length of your skis.

Ease of use

Fits a pair of skis up to 190 cm in length and a pair of poles.

Capacity

Robustness

If you want to transport your ski equipment, this bag is designed to hold a pair of skis and poles. 

Condition

Skill Level

Frequency

Weight (g)

Number of Pockets

Type of Cover

Waterproof

Foldable

carrying system

Customization

Number of Compartments

Fastener Type

Adjust the length of the bag to your skis with the rolltop. Then clip the buckle and use the ring (which acts as a handle) to pull your bag.
The foam padded, adjustable shoulder strap lets you carry the bag over your shoulder more comfortably.

Transport

We use high-density, 600D polyester canvas for the exterior of the case. The component has been subjected to a battery of tests to verify its durability. These tests offer a guarantee of quality, which means that the products will last a long time.
The inside of the bag is made of a polyethylene liner that provides superior resistance to abrasion and cuts.

Durability

You can carry a pair of skis (up to 190 cm) and a pair of poles.
The bag is 201 cm (79”) long.

A small elastic between the two wheels lets you keep it in a rolled position, saving you space.

Compact design

There is an insert on the bag for writing your personal information.

Suitcases & Luggages

Shoulder strap comes with an ergonomic pad for comfort and stability.

Separate, padded helmet compartment for impact resistance.

Wide mesh insert at the top for air flow.

Ventilation

Developed for skiers/snowboarders seeking a bag to protect their boots and to transport them easily over short distances. 

impact protection

Number of Skis/Snowboards

Use the main compartment for your ski or snowboard boots.
The secondary compartment holds a ski helmet, gloves, and goggles.

Compartments

A handle to carry your bag when travelling short distances.
A foam padded, adjustable shoulder strap for carrying the bag over the shoulder more comfortably.

When the pocket is fully open, it can be used as an insulating mat for putting your ski or snowboard boots on in the parking lot.

Floor mat

A wide mesh at the top that allows air to flow inside in order to speed up drying and provide ventilation for the entire bag.
However, we recommend that you take your boots out at the end of the day so that they can dry fully in the open air.

We use high-density 600D polyester canvas for the exterior of the case. The component has been extensively tested to check the resistance and guarantee the long life of the product.The inside of the bag is made of a polyethylene liner that provides superior resistance to abrasion and cuts.

Once empty, you can fold down the case so that it takes up as little space as possible.

This bag has an insert on the shoulder strap for writing your personal information, to prevent you from losing it or confusing it with someone else's.
You can add:
your last name, first name, phone number, home address, and email address.

Ski Bags

100% anti-UV. Brown S3 lens for good vision in sunny and overcast conditions.

Sun protection

Essential anti-fogging, double screen with anti-fogging treatment.

Anti-fogging

Wraparound lens with Essential field of vision.

Field of vision

User comfort

Stability

Adjustable

Compatibility

From the entry-level range, we equip our ski goggles with dual lenses to reduce fogging and guarantee good visibility in good weather.

Ventilation Zippers

Strap Type

Technical Lens

Season

Compatible with prescription glasses

Weather Conditions

Field of Vision

glass composition

fogging treatment

Lens Colours

Glass Category

anti-uv

With Case

Tightening Type

Diving Mask Type

All our goggles are 100% anti-UV certified by the EN-174 standard. Goggles, which perfectly enclose the eyes and prevent any direct or reflected UV light from entering, provide the best protection.

UV Protection

S3 Sun is a dark lens that protects you from bright sunlight. 
We have selected a brown tint that offers good visibility in shaded areas or in the late afternoon when the sun is less bright.
Lenses are not scratch-resistant.

Sun S3 lens

Essential anti-fogging is a dual lens with treatment on the inside of the inner lens.
To ensure effective ventilation, do not block the vent with a neck warmer, for example.
Do not rub inner surface of lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible. Dry goggles thoroughly every night.

Essential anti-fogging system

Dual screen reduces condensation. The air trapped between the lenses creates a layer of thermal insulation. The thermal shock between the inside and the outside of the goggles is lower, limiting fogging on the goggles’ inner lens. The inner lens also has an anti-fog treatment.

Double lens

Wraparound dual lens, made of polycarbonate for the outer lens and cellulose polycarbonate for the inner lens, both cut to fit the shape of the goggles.

Wraparound lens

There is a vertical and a horizontal visual field. The G 100 has an Essential field of vision, providing good, safe, visibility on the sides.

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

The padded sides and the shape of the goggle skirt leave space for the stems of eyeglasses. G 100 ski goggles in size L can be worn with glasses (maximum width of 135 mm).

Compatibility with prescription glasses

40 mm-high polyamide, polyester, and rubber strap.

Strap

The EN -174 standard is a European standard applied to goggles used for eye protection when downhill skiing or during similar activities, such as snowboarding. The ANSI standard, the American standard, has more stringent requirements for resistance to shocks and impact.
These ski goggles pass both these standards.

CE - EN -174 and ANSI Standard

Moisture causes fogging. To prevent fogging, keep the foam dry by not placing your goggles on your head or helmet. Falling face down in the snow can also cause your goggles to fog up. Dry your ski goggles completely overnight to get rid of all traces of humidity so you can hit the slopes with bone-dry goggles the next day.

To avoid fogging

The size of the goggles is based on head size
Up to 55 cm, choose size S (formerly S/M); from 56 cm up, choose size L (formerly L/XL)

Two sizes

Kids' Ski & Snowboard Goggles

Different settings on both the front and back of the straps.

Attach seamlessly to the loops on your ski pants.

These ski straps provide extra support for your Wedze ski pants. Compatible with most of our models.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Main Material

- 100 Ski Pants (Women) - 8547082.
- 180 Ski Pants (Women) - 8563097, 8603856. 
- 500 Ski Slim-Fit Pants (Women) - 8602800, 8607637.
- 180 Ski Pants (Men) - 8569208.
- 100 Ski Pants (Men) - 8569208.
- 500 Ski Softshell Pants (Men) - 8558868.

Our straps are compatible with the following ski pants:

Attach the straps to your pants before you put them on. 
The straps have three parts in a Y shape: The two longer parts attach to the front of the pants in the loops intended for this purpose. Put the end of the strap through the loop and attach using the hook-and-loop tab. 
The right setting for the straps is the one that puts slight pressure on the shoulders.

How do I adjust the straps?

This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. The store. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

Repairs

Ski Pants & Bibs

The straps keep your skis together as you carry them

A foam protector separates the edges and reduces the risk of damage

Use these straps to carry your skis and prevent their edges from rubbing together.

The main yarn used for the sole is 38% wool.

Warmth

Medium thickness. Recommended for ski touring.

Precision

Extremely fine woollen yarn + polyamide for excellent moisture wicking.

Moisture management

Elastic ankle area for perfect positioning on the leg.

Anatomic design

These socks are designed for demanding skiers and snowboarders looking for the benefits of wool!

reinforced area

height of the sock

thickness of the sock

reduced chafing

silicone

moisture management

anti-slip

touch

shoes with left or right mark

Style

Elastic

Packaging

The high percentage of wool delivers durability, insulation, and high moisture absorption.
The elastane keeps the sock snug against your feet.

Composition

Medium-thickness socks are recommended for ski boots with a medium to narrow shell.
Ideal for all your ski touring expeditions.
Toe box for greater comfort.
Light reinforcement on the shin and ankles.

Features

This ski sock prevents discomfort. The seams never sit on a pressure point.

Ergonomic design

All our sock sizes cover 3 or 4 shoe sizes. The elastane helps the socks mould to your feet and stay in place. Foot length, size, and volume vary from person to person: that’s why it’s important to try your socks on before going skiing.
We always recommend choosing slightly small over slightly large socks.

Choosing the right sock size

The size chart for this sock is more precise than for other models in the range: One sock size covers three foot sizes instead of the usual four. This model also offers asymmetrical feet (differentiated right and left foot) for a perfect fit.

Sizing

This sock is made with an anti-friction yarn.
Blisters are generally caused by socks, shoes, or foreign objects chafing feet. Humidity also plays a role, as it makes skin more vulnerable.
Chafing is reduced when the sock stays in place.
Some of our socks have anti-friction yarn to reduce irritation.
These socks do not provide 100% protection from blisters.

Reduce blisters

Our ski socks are guaranteed for 2 years.
Our commitment: To offer you long-lasting products that you can use for all your winter sports. The products we love the most are those that have had many adventures, with many more to come!

Warranty

Ski Socks

Adjustment wheel for the entire head circumference. Semi-rigid ears.

8 holes, ventilation channels, 1 rear extraction grill, and ventilated liner hat

Lightweight

Complies with the EN 1077:2007 standard (Cat B), MIPS anti-rotation system.

The ear pieces press up against the face and prevent drafts. Thin liner.

Adjustable ventilation and head size adjustment wheel.

Developed for frequent skiers looking for a lightweight, highly ventilated helmet, with excellent retention and an anti-rotation system (MIPS). 

Adjustable Helmet

Intensity

helmet compatible with

protection technology

ear pad

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Certification

Detachable Visor

The PST 900 Ski Helmet is equipped with the MIPS anti-rotation system. Its purpose is to reduce the rotational energy of an impact and thereby reduce the risk of brain damage.
The low-friction layer (yellow layer under the helmet liner) allows multi-directional movement of 10 to 15 mm with certain oblique shocks. This is to reduce the rotational force transmitted to the head and brain.

Anti-rotation

Our PST 900 Ski Helmet includes the MIPS system and semi-rigid ears covered with a shell. They provide excellent coverage of the ear (no cartilage pain and excellent hearing) and conform perfectly to the shape of the face (superior retention and no drafts).

Semi-rigid ears

The liner of our PST 900 Ski Helmet with the MIPS system is not the warmest in our range. As this helmet is intended for frequent skiers, we wanted it to be ventilated and breathable. The areas (in light grey) with memory foam allow the helmet to conform perfectly to the shape of each person’s head and reduce uncomfortable pressure points.

The PST 900 Ski Helmet with the MIPS system is very efficient for temperature regulation. It has adjustable air vents (open/closed) that provide very good thermal comfort, whatever the conditions.
Internal ventilation channels with an outlet grill at the back allow excellent airflow.

The adjustment dial is key for keeping your helmet secure. The dial is easily accessible even with gloves on, allowing for easy and precise adjustments at any time. This makes it very comfortable and provides maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment dial

Known as In-Mould, this type of structure features a polycarbonate outer shell moulded directly to an EPS liner. The inner EPS liner absorbs shock in the event of a collision. The whole helmet is extremely lightweight. Change your ski helmet at least every 5 years or after any significant impact.

In-Mould construction

The European standard EN 1077:2007 applies to helmets used for cranial protection during downhill skiing and snowboarding. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: Protects the top and back of the head as well as the ears and the side of the head.- Class B: Protects the top and back of the head but doesn’t cover the ears.

EN 1077 standard

* Measure the circumference of your head in centimetres (around the middle of the forehead, just above the ears).

* Then choose the size that corresponds to this measurement. 
Example: For a head circumference of 56 cm (22”), try a helmet in size 55 cm-59 cm (21.5”–23”).

Which size?

Take plenty of time to try it on properly. You shouldn’t feel any discomfort. If you do, try another model.
Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there are no gaps between the top of the goggles and the helmet.

When skiing, your helmet should be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference should be adjusted using the adjustment dial.
* The chinstrap must be properly adjusted.
It’s a bit like a car seat belt: if it’s too loose, it won’t protect you.

Helmet adjustment

For optimal protection, avoid wearing a thick hat under your helmet that could cause the helmet to shift on your head. 
Wear a thin beanie or balaclava instead. Helmets have good insulating properties. Often, nothing else is needed. Do not attach a camera to your helmet, as it could affect your safety. The standard does not take into account any elements added to the helmet.

Safety

Removable comfort foam is machine-washable at 30°C. The ears of the PST 900 Ski Helmet with the MIPS system are not detachable.
Use only soapy water and a soft cloth to clean your helmet.

Ease of use:

Make sure this product is right for you.
If not, you can return it in accordance with our terms and conditions, i.e., with the instructions, labels, and the original packaging, as applicable; it can be refurbished. 

Product returns (specific product: personal protective equipment).

Helmets

Simple shoulder strap. Adjusts to the size of your skis.

Resistant material for protecting and storing skis.

With this useful bag, you can store and protect your skis (< 192 cm) and poles.

Sports/

Winter Sports/

Ski Gear/

Ski Poles/

wedze

Downhill Ski Poles – Boost 900 Safety