onlyonline

Shelf for your tools and 360° rotating clamp.

Ease of use

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Compact design

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Condition

Intensity

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Main Material

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Bike Racks & Stands

Quickly and easily clean any type of chain with a single cleaner!

Compatibility

Using the chain cleaner is quick and easy, and becomes a real pleasure.

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Frequency

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

How to use this product: 

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

How much degreaser should you use?

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Maintenance advice: 

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

Bike Tools

clearance

Apply with a brush or with the chain cleaner

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Disc Brake Compatibility

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

A precise, durable, reusable spray nozzle

Use the cleaning spray on all of your bike's parts.

Versatility

This bike cleaning spray is designed for cleaning your bike without harming the paint or any parts.

This bike cleaner is designed for doing step 2. 
Remember to degrease your drive train before spraying the cleaner onto your bike (step 1). Next, spray on the cleaner, rinse it off and dry your bike (step 2) before applying your chain lube (step 3). Your bike will then be as good as new.

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

The spray nozzle used for this product is very precise, specifically designed to be used with bikes, and extremely durable. In fact, it can be used to spray on more than 50 L (44 qt.) of bike cleaner. Because of this, we've created a 1 L (1 qt.) refill that avoids you having to throw away the spray nozzle.

Danger! Cause skin irritation. Causes severe eye irritation. Keep out of reach of children.Wear protective gloves and eye / face protection. 
In case of contact with eyes: Rinse cautiously with water 
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Warnings:

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

With its compact size, you can take the kit everywhere with you.

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Maintaining your bike will let you:
- Extend the life of the various components 
- Ensure that it works properly
- Reduce unwanted noise
- Prevent breakages
- Enjoy the pleasure of riding a clean bike

Why should you maintain your bike?

To ensure full maintenance, we recommend that you follow these 3 steps: 
01. degrease your drive train
02. clean your bike
03. lubricate your chain

How to look after your bike

This kit contains the 3 products needed to carry out the 3 steps required to properly maintain your bike. You will be able to carry out at least 3 full services on your bike.
Products included in the kit: 
01. Plant-based degreaser (100 ml)
02. Concentrated bike cleaner (100 ml)
03. All-weather chain lubricant (50 ml)

Kit contents

This degreaser lets you effectively degrease your drive train. You can apply it using a brush or our chain cleaner. 
Application with a brush: pour about 25 ml into a pot and apply generously to your chain, cassette, derailleurs and derailleur pulleys. Leave for a few moments then move on to step 2.
Application with the chain cleaner: pour on about 9 ml, turn the pedals a few times before moving on to step 2.

How to use the drive train degreaser

Pour about 30 ml of concentrate into a bucket of water then apply generously with a sponge to the whole bike. 
The product will not damage the paint or any other components of the bike.
Rinse with clean water then dry your bike. Pay particular attention to drying, especially your drive train, to ensure total efficiency later on. Now you can move on to step 3.

How to use the concentrated bike cleaner

Remove the cap, position the applicator on the lower part of the chain (inner side) and make a full turn (in the opposite direction to pedalling). 
To make sure you don’t apply too much, use your quick-release as a guide.  
Remove the excess lubricant with a cloth placed under the chain, then do 2 or 3 complete turns of the pedal (in the opposite direction).
The lubricant will protect your chain in all riding conditions.

How to use your chain lubricant

01. degrease your drive train if you’re applying the product with a brush, be careful not to project the dirt towards you.
02. concentrated bike cleaner: in winter, use warm water to make this step easier and use cold water in the summer.
03. chain lubricant: apply on the inside of the chain, position the applicator on the lower part of the chain.

Good to know

Maintenance advice

Made in

List of ingredients:
Mix of saturated and unsaturated fatty acid methyl ester PEG-30 glyceryl cocoate 
Each ingredient is given with its INCI name (International Nomenclature of Cosmetic Ingredients)

Drive train degreaser composition

Concentrated cleaner composition

Synthetic oil with additives and anti-wear properties, corrosion protection and wash resistance.

Chain lubricant composition

Anatomical chamois pad with high-density foam moulds to your body perfectly.

Sitting comfort

Wide, elastic, silicone band at the thighs.

Moisture management

Very practical pocket on the outside of the thigh for easy access while riding.

Pockets

These bibs provide optimum comfort and support for rides lasting an average of 3 hours at a moderate pace.  

Maximum washing temperature 30°C. Normal cycle.

Skill Level

Season

reinforced area

Number of Pockets

retaining strip

belt height

Weather Conditions

Reversible

Stitching Type

Pocket

Type of Length

Style

Zipper Type

With Straps

Our Endurance range for all cyclists for whom their rides are not synonymous with performance and speed records. We’ve paid a great deal of attention to comfort, to make your rides as enjoyable as possible.
Our design choices have been made with comfort in mind. 
If comfort is more important to you than performance, then look no further, the Endurance range is made for you.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:
- Discover: the most suitable products for starting road cycling - affordable, simple and effective.
- Endurance: our core collection for experienced cyclists looking for comfort for their rides.
- Endurance Ultra: specially designed for long-distance and touring cyclists.

The Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- a wrap-around waistband for excellent support despite no straps
- silicone-coated elastics at the bottom of the legs for excellent support when pedalling
- a snug, non-compressive fit that’s easy to forget once you’re wearing the shorts.
- two easily-accessible side pockets

Design

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle. 
It is designed specifically for men and conforms to your body as you pedal.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. 
The pad has a protective, high-density, 120 kg/m³ foam insert under the sit bones and the entire groin area. 
The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. All of the layers are breathable and wick perspiration.

Breathable, high-density foam

Men's Sports Shorts

Long-lasting rust protection in all weather conditions.

Corrosion resistance

Smooth pedalling

Lubricating the chain reduces disturbing noises.

Noise level

This lubricant is designed for lubricating your drive train during rides in all weather conditions.

Shake the bottle before use.
Only apply to the inside of the chain, i.e. the part in direct contact with the chainring teeth and the derailleur jockey wheels. 
Wipe off any excess with a microfibre cloth.

This all-weather chain lube is designed for doing step 3. Once you've applied the degreaser (step 1), spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

100 mL (3 1/2 oz.) bottle = approx. 40 uses

Close-fitting cut and elastic thighs with silicone straps.

Lightweight

Push your limits with the RCR R bib shorts: comfort, lightness and breathability in hot weather. The ideal equipment for demanding cyclists. Pro Fit.

Maximum wash temperature of 30°C. Very delicate cycle.

With the RCR R bib shorts, we wanted to create effective shorts with the perfect compression while still leaving you maximum freedom to move around on your bike.
For us, performance isn't about short or long distances; performance encompasses everything. This is why we've created these uncompromising cycling shorts, ideal for all your outings!

The go-to performance shorts

This pad is classed as a Performance Elastic Interface® pad. 
This version offers a more anatomical fit and protection throughout the pelvic tract. A very high-density foam was applied under the top layer for maximum protection on long-distance rides, guaranteeing comfort for up to 7 hours in the saddle.

Elastic Interface® RCR 2.5 HD pad

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not use bleach. Do not place on a heater to dry. 

Care instructions

100 mm diameter pressure gauge accurate to 1 PSI.

Precision

Power

The 260 mm metallic base provides excellent stability

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

Valve Type

Weight (g)

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Easy inflation

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on this pump was designed for an excellent and comfortable grip.

Ergonomic handle.

The metal base and design of this pump make extremely stable.

The 900 bike pump has been awarded a Red Dot as part of the Red Dot Design Award 2024.

Product with a design award.

Bike Pumps

Mesh inserts (ultra breathable fabric) on the sides

Breathability

Enter the world of performance with a jersey that weighs only 129 g in size M

Elastic sleeves and hem at the back provide a snug fit

Back: 3 regular pockets and one zippered pocket 
Sides: 2 pockets for trash

This cycling jersey is part of the Racer range from Van Rysel. It's designed for male and female cyclists who want technical features and performance.

Collar Type

sleeve length

Waterproof

anti-uv

Introducing the new version of our Racer jersey. It's even lighter and more breathable than the previous version, making it perfect for your training rides and races! 

Our starting point was clear: we wanted a dedicated performance jersey that wouldn't compromise on either breathability or aerodynamics.
Mission accomplished with the 2nd-generation Racer jersey!

The 2nd version of our go-to racing jersey!

This jersey is unisex! 
The materials and pattern used will fit absolutely any body shape, whether you're male or female. 

The cut is close-fitting for a second-skin effect. 
The lightweight elasticated hem and its silicone band hold the jersey in place, no matter your hip width.

Unisex jersey

For this jersey, we've chosen ultra-light materials that keep you really comfy. 
Most of this jersey is made from a fabric called Amigo, which is extremely breathable and lightweight. 

The sides and arms are made from mesh to let plenty of air through and keep you nice and cool.

An extremely light, breathable jersey

Ride outdoors in even the hottest weather without feeling damp from sweat. 

We've used a thin, breathable, anti-UV fabric on the front and back of the jersey to keep you cool, comfortable, and protected from UV light.

decathlon

2 Bike Cleaning Brushes