clearance

Good insulation against the cold (between 6°C and 11°C).

Warmth

Outer fabric offers wind protection as you ride.

Windproof

Outer fabric offers protection from drizzle or light rain.

Water repellent

Cycling comfort

Touchscreen feature lets you use your smartphone without removing your gloves.

Connectivity

User comfort

Gloves for cyclists riding in fall and winter conditions in temperatures between 6°C and 11°C. 

Maximum washing temperature 30°C. Normal cycle.

Waterproof

Condition

Skill Level

comfort temperature

Weather Conditions

Tightening Type

Main Material

A product’s ability to protect against the cold depends on its thermal resistance and breathability. The higher the thermal resistance, the more body heat it retains while you ride.
During intense rides, perspiration on your hands can make them feel cold. We therefore recommend exercising at a moderate intensity in cold weather.

Product warmth

Waterproofness is a fabric’s ability to prevent rainwater from soaking through. 
Water repellency refers to a fabric’s ability to make water bead off its surface without being absorbed. The fabric soaks up little or no moisture, dries more quickly, and remains light. Water repellency also helps keep the outer surface cleaner.
Water repellency is obtained by applying a treatment to the fabric's external surface.
This product is not waterproof!

Water repellent component

Machine wash at 30°C. Synthetic cycle. Use minimal laundry detergent. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry.

Care instructions

Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users. Our obsession is to create products that meet the specific cycling needs of our users and eliminate hindrances to a good cycling experience.
We then test our products in the field, as we are convinced that only by subjecting them to real world conditions, like the ones you experience on your bike, can we continuously improve our products.

Product tests

Winter accessories

EN 1078 certified
 with Mips® Air Node for enhanced angled impact protection. 

Impact protection

Features 8 air inlets connected to 7 outlets via channels. 

Ventilation

Uses in-mould technology for lightweight construction: 280 g (9.9 oz) in size M.

Lightweight

Built with a turn-ring system for a micrometric occipital fit. 

Anatomic design

Aerodynamics

Compatible with long hair. Accommodates a braid. 

Compatibility

Designed for your sport rides. Lightweight and ventilated, this is the Decathlon CMA CGM team's mountain racing helmet. 

Adjustable Helmet

Intensity

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Style

Detachable Visor

Fastener Type

This helmet is personal protective equipment (PPE). The protection it provides depends on its condition.
We can accept only helmets returned in new condition. If your helmet doesn’t suit you, please return it with the user guide and tags. 

Return Conditions (specific to PPE) 

The Mips® Air Node system is designed to protect against rotational impacts. In the event of an impact, especially an angled impact, your head may rotate suddenly and violently, which is a common cause of concussions.

Mips® Air Node is an integrated, discreet layer that lets the helmet move slightly relative to your head. The system stays fixed during normal use, releasing on impact to dissipate rotational energy and reduce the risk of injury. 

Mips® Air Node: safe, lightweight, and ventilated. 

Because safety comes first, this helmet meets the highest impact standards and 
complies with European regulation EN 1078. 
The standard covers construction (including field of vision), shock absorption, retention system features (including chinstrap and tightening devices), and marking and information. 

Safety 

The size of a helmet is based on your head circumference. 

RCR:
Size S: 52–55 cm | 240 g (20.5–21.7 in | 8.5 oz) 
M: 55–59 cm | 280 g (21.7–23.2 in | 9.9 oz) 
L: 59–62 cm | 300 g (23.2–24.4 in | 10.6 oz) 

Note: This helmet features the Mips system, which slightly affects sizing. If you’re at the upper end of a size range, we recommend choosing one size up. 

Size and Weight 

Air Node is the most advanced protection solution from Mips®.

Benefits include:

Lightweight and well-ventilated: perforated and designed to not impede airflow.
Comfort:no pressure points.

Smart protection: only activates upon impact to deflect rotational forces. 

Why Mips® Air Node? 

Optimal ventilation occurs when large air inlets connect to exit channels that let the air flow freely. The head is an essential component for cooling the body during intensive effort.

The evacuation of the heat generated is thus a priority for maintaining a high level of performance. 

Ventilation 

RCR stands for Racer. This line of products is designed for cyclists looking for the best equipment. Versatile and uncompromising, it delivers excellence on all terrain, from flat sprints to mountain ascents.

The RCR range has been chosen by the Decathlon CMA CGM professional team. 

RCR 

Poorly placed vents greatly increase drag and reduce aerodynamic performance.

The RCR has a variable ventilation system depending on your position on the bike. For example, when climbing a slope, the straighter up you are, the more effective the system. As soon as you tip down for a descent, the aerodynamics of this helmet make all the difference. 

Ventilation and Aerodynamics 

Helmets don’t last forever. For maximum safety, we recommend replacing your helmet at least every 5 to 7 years. Be sure to store your helmet in its case, in a dry, cool place away from sunlight.
Extreme temperatures deteriorate the helmet’s foam more quickly.

Always replace your helmet after a major impact, as damage you can’t see may affect its protective ability. 

Helmet Lifespan 

Helmets

Made from merino wool and lined to protect you from the cold.

Use it in 10 different ways to suit your needs.

Flexibility

Extremely soft, thin merino wool that doesn’t scratch.

Softness

This merino wool neck warmer is designed to protect you from the cold on your bike rides.

Maximum wash temperature of 30°C. Very delicate cycle.

We only use wool from Merino sheep raised in South Africa on farms that do not practise mulesing.

Wool origin

Do not machine wash above 30°C. Air dry (do not tumble dry). Protect it from moths when stored. Use a repellent if necessary.

The entire design team has extensively tested this neck warmer so that we can be confident we’re bringing you a product that perfectly meets your needs.

Tests

Cycling Neck Warmers

Stretchy enough to fit different head sizes.

A lightweight product that's easy to wear in hot weather.

The perfect protection for cycling in warm weather.

Type of Beanie

Bike Helmets

Breathable, honeycomb fabric for effective perspiration wicking.

Moisture management

Quick drying

Designed for cycling in warm weather, this base layer wicks away perspiration and dries quickly. 

Frequency

Collar Type

sleeve length

anti-uv

Pocket

Men's Base Layers

Fleece lining to protect against the cold.

3 standard pockets and 1 zippered pocket for your phone and keys.

Pockets

Ventilated back and underarms especially designed for intense activity.

Breathability

Stretch fabric for greater comfort and freedom of movement.

Stretch

Designed to keep you warm in cool weather when your short-sleeved jersey feels too light. 

Number of Pockets

Customization

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Do not add fabric softener. Hang-dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry. Do not wash along with garments that have hook and loop straps, and make sure the fastenings on all other garments are closed.

Care tips

Our team of product designers based at the B'Twin Village in Lille is continuously working to make cycling more comfortable for our users. We strive to create products that meet the specific cycling needs of our users and to eliminate hindrances to a good cycling experience.
We test our products in the field, as we are convinced that only by subjecting them to real world conditions, like the ones you experience on your bike, can we continuously improve our products.

Product testing

Men's T-Shirts & Tank Tops

Protect your hands from the cold with the warm lining inside these cuffs

The fabric withstands 5,000 mmH2O before washing and 3,000 mmH2O after washing.

Stay visible at night with reflective strips.

Visibility

Protect your hands from the wind with the coated component.

Adapt your cuffs to a wide variety of bikes (flat/rounded handlebar)

Easily attach the cuffs with the tightening system (rip-tabs and drawstring).

Easy dressing

The cuffs' tight hold makes it easy to take them on and off your hands.

Stability

An alternative to gloves, these comfortable, waterproof cuffs will protect your hands from the cold and rain during your rides.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

type of lining

Season

interchangeable left right

moisture management

Precipitation

Reversible

To Bring Warmth

Lining Material

type of waterproofing

Type of Length

shoes with left or right mark

Schmerber

These cuffs are made of a layer of coated, windproof, waterproof fabric, a soft and comfortable layer to keep your hands warm, and a stiff inner layer to hold the cuffs in place as you ride. 
The reflective strips on these cuffs ensure night-time visibility. Product dimensions:35 x 30 cm (14" x 12")
One size.


Warmth and comfort

Everyone responds differently to the cold, and some people are more sensitive than others.
There are several factors that help explain the differences in feeling:
> the intensity of the activity
> each individual's metabolism
> blood circulation
> etc..
The cuffs can be used with or without gloves.

Cold sensitivity

- Water-repellent treatment
A fluorine-free chemical wash on the fabric's surface makes water slide right off. This treatment can be reactivated by heat (10 minutes in the tumble drier on a gentle cycle).
- Waterproof construction
A waterproof strip under the seams prevents water getting in.
- Waterproof fabric
A fabric's capacity to prevent water from penetrating it.

Waterproofing

Waterproofing is measured in Schmerbers or mmH2O (the pressure exerted by a water column).
A material with a rating of 10,000 mmH2O (400") can resist 10 m (10 yd) of water.
The bigger the number, the more waterproof the fabric.

Measuring waterproofing

Our cuffs are tested using a thermal hand in a lab with temperatures from 5°C to -20°C and winds from 10 km/h to 25 km/h (6mi/h to 15 mi/h).
The City Bike Cuffs 940 are rated 5 out of 5 for warmth.
Recommended temperature: -10°C
Limit temperature: -20°C

How is use termperature measured?

1) Insert the cuffs with the reflective strips on top
2) Fasten the rip-tabs
3) Tighten the drawstring
The cuffs are suitable for straight and curved handlebars (city bikes).
These hand warmers are easy to put on your handlebar. Once installed on the handlebar, they are held in place by rip-tabs. These cuffs make it easy to use the brake levers and gear shifters.

Attaching the cuffs to your handlebar

Cycling Gloves

The fleece lining provides effective protection from the cold. 210 g/m²

Freedom of movement

4 back pockets (1 zippered)
2 side pockets (1 zippered)

Full-length zipper for good ventilation during intense workouts

If you want to keep riding in cooler weather, the RC 100 Jersey is ideal.

Zipper Type

Top Shape

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more perspiration escapes and the more breathable it is. •	RET < 6: extremely breathable, suitable for intense workouts
•	RET 6 to 12: very breathable, designed for moderate exercise
•	RET 12 to 20: average breathability, not comfortable for intense exercise
• RET >20: little breathability, inappropriate for exercise

Fabric breathability
RET 5.16

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Fabric that wicks away perspiration for quick drying.

4 back pockets (including 1 zipped) and 2 side pockets.

This jersey was designed for you to start cycling in hot weather, on rides of up to 2 hours or 50km.Cut:Regular fit.

Machine wash at 30°C. Synthetics cycle. Turn the garment inside out. No fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not bleach. Do not place on a heater to dry.

"Regular" cut suitable for all body types.

Pre-shaped medium density foam pad.
Thickness: 13 mm
Density: 100 kg/m³

Sitting comfort

Stretchy fabric ensures shorts stay in place at the waist and thighs.

Designed for beginners riding for up to 2 hours (50 km) in cool weather.

Length

reinforced area

retaining strip

belt height

Stitching Type

With Straps

To ensure greater comfort in the saddle, we created this medium density chamois pad.
The fabric is soft and breathable. The padded zone is soft, with a density of 100 kg/m³ and a thickness of 13 mm. Perforated fabric actively wicks away perspiration. The pad keeps you comfortable on rides of up to 2 hours.

Our new medium density pad

The shape of the padded zones was defined by tests on a sheet of pressure, designed from a dummy moulding and approved after various trials and usage tests. These tests, conducted on real cyclists, involved measuring the pressure points on the saddle. The padded zone covers contact points where pressure is greater. There is a dart at the front for a better fit.

Shape

The ischium bone and the perineum are covered and protected. The reinforced area between the legs is relatively narrow to prevent irritation from rubbing while pedalling. Channels have been embossed into the reinforcements to provide greater flexibility.

Reinforced areas

Machine wash at 30°C. Wash on a synthetics cycle. Turn the garment inside out. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Based at the Btwin Village in Lille, our product design team constantly works to make cycling more comfortable for our users.
We strive to create products that meet our users’ specific cycling needs and eliminate unnecessary features. We then test our products in the field, as we are convinced that subjecting them to real-world conditions, like the ones you experience on your bike, is the only way to continuously improve our products.

Cycling Pants and Overpants

Increases thermal comfort at the beginning of a ride in cool weather.

Developed and tested by our engineers for cold temperatures, these leg warmers are ideal when cycling shorts aren't quite enough.

Support Type

Protection Area

A product's ability to offer protection from the cold. It depends on the material's thermal resistance and how much air can pass through it. The higher its thermal resistance, the more the product retains the heat produced by the body while cycling.

To determine whether a fabric is breathable, we measure its evaporative resistance (test based on standard ISO 11092). 
The lower its resistance, the more the fabric will let water vapour produced by the body escape, and therefore the more breathable it is. 
For example: RET < 9 = extremely breathable fabric

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add softener. Line dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry.

Stay visible at night thanks to its reflective component (EN 17353 standard).

Easily wraps around your arm or ankle in one simple move.

Ease of use

Want to increase your visibility while cycling? This armband increases your safety during the day or at night.

Sports/

Cycling/

Cycling Clothing/

Cycling Neck Warmers/

van rysel

Cycling Headband - RoadR 500 Grey