clearance

The screw top and mouthpiece ensure a watertight seal.

Waterproof

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Limits taste and odour

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Capacity

Graduated scale makes it easy to track intake.

Precision

Compatible with our Water Bottle Cap (item code 8561474) for the mouthpiece.

Versatility

Compatible with all bottle cages on the market.

Compatibility

Volume (ml)

Skill Level

Frequency

isothermal

Cap Type

Main Material

There’s nothing worse than a plasticky taste or smell in a water bottle. But this occurs with most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is flexible and has a neutral taste and smell. When blind-tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C[158°F]).

How to care for your water bottle

Bike Hydration

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Tire Assembly

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

onlyonline

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

Easy assembly/dismantling

This bell ensures your safety when riding in a less noisy environment.

Condition

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Bike's Bells

12 lumens in white (continuous, flashing).
4 lm. in red (continuous, flashing).

Visibility

Cont. white 30h / flash. 50h
Cont. red 30h / flash. 50h
Batteries (CR2032 incl.)

Autonomy

White and red, 2 modes (continuous and flashing).
Universal elastic mount.

This front or rear bike light is designed to keep you visible. Easy to use with its 2 modes, 2 colours, and elastic fastening system.

Weight (g)

Brightness (Lumens)

reflective

Lighting Type

Type Light

Sold In Set

Autonomy (H)

Hook Type

Power Type

Range (m)

Feedback from cyclists and other road users (drivers, pedestrians, etc.,) led to optimum features for cyclists’ visibility. 

With one purpose in mind: the cyclists’ safety.


Lights

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Ease of use

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

100% waterproof with the mouthpiece closed, non-drip with mouthpiece open.

Clear body graduated for easier intake monitoring.

The elastomer cap won’t slip off and makes closing the bottle easy.

Traction

Developed for demanding cyclists who want a bottle that keeps them hydrated as they ride.

All of our "FastFlow" bottles use the SureSnap® valve, the best on the market. This valve controls the flow of water effectively and precisely. When you press down, water squirts out of the mouthpiece.
Plus, the anti-leak mouthpiece can stay open while riding without water dripping onto your bike's frame.

SureSnap® valve

The mouthpiece is 100% watertight in closed position. Use this position for mixing the isotonic drink in the bottle or for carrying it in a bag.
Once on your bike, leave it open. The SureSnap® valve prevent leaks. Drink quickly and safely!

How to use the FastFlow valve

There’s nothing worse than a plasticky taste or smell in a water bottle. But this is the case for most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is supple and has a neutral taste and smell. When blind tested against bottles from other leading brands, ours were the most neutral-tasting.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap, and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C).

Comply with regulations from B, S, F, GB, I.

Fit adult or child bike and clip on—no tools required.

Lightweight

These two wheel reflectors are designed so you'll be seen from the side when cycling.

Light Level

Bike's Lights

Look Keo standard pedals, including Van Rysel pedals. 

4.5° float (lateral movement) to protect your joints. 

Freedom of movement

Elastomer pads to walk without slipping. 

Grip

Our teams have developed these cleats compatible with Look Keo clips with a float of 4.5°. 

Playing Surface

Toe Clip Type

Bike Pedals & Cleats

2 zip-up pockets, 1 inside mesh pocket, 1 key holder, 1 outside mesh pocket 

Multiple compartments

Easily carry your belongings on your handlebar using this frame bag, designed for trail rides in good weather. 

Volume (L)

Height (cm)

Attachment Type

Components 

Reflective strips for nighttime visibility. 

Visibility 

This bag is compatible with XS/S/M/L/XL size bikes.
Make sure it’s compatible with your bike before buying this bag. 

Bike compatibility 

We do our utmost to use the least abrasive materials possible and design products that offer optimum stability. However, friction can sometimes occur between the bag or harness and the frame of your bike. To protect your frame and avoid possible abrasion, we strongly recommend that you apply protective stickers to the contact areas. 

Should I protect my frame from abrasion? 

Adjustable straps all around the bag.
- 3 hook and loop straps for the top tube
- 2 securing straps for the down tube and head tube 

Universal mount 

Weight 

- 1 left patch pocket 
- 1 right large pocket with inside mesh pocket, key holder, and elasticated pump strap 
- 2 outside mesh pockets for rubbish 
- Pass-through for water bladder hose or cable 

Storage: 

Non-waterproof stitched textile bag. If you prefer a waterproof bag, get our IPX6 frame bag (8912300). 

Is this bag waterproof? 

Bike Bags & Backpacks

For shoes with 3-hole inserts in a triangle and Keo cleats.

Adjustable

A clipless pedal with an excellent pedalling surface and optimal foot support for effective pedalling. 

Pedal Type

Inside the box: 
- 2 cleats compatible with Look Keo 4.5°
- 6 screws and 6 washers

Included in the box

Certified EN 1078.
Equipped with MIPS: for better absorption of oblique impacts

Impact protection

Adjustable strap length. 3D adjustment dial

17 vents for ventilation during ascents. Quick-drying absorbent foam.

Ventilation

Reflective band on the back of the helmet

Designed for MTB, the EXPL540 MIPS helmet is also suitable for cyclists looking for a lightweight, well-ventilated helmet for rides on trails and paths.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

removable foams

number of aeration points

Bluetooth Connection

Style

Detachable Visor

Fastener Type

Weight: 335g in size M, 365g in size L
Number of vents: 17
Protection technology: MIPS
Type of fastening: clip
Occipital adjustment: 360° dial
Removable and washable foam pads 
Number of visor positions: Fixed
Shell material: Polycarbonate Inmold

Size M: 55 to 59 cm head size 
Size L: 59 to 62 cm head size

Warranty: 2 years
Certifications: EN 1078

In a nutshell

Helmets

Each tool is designed to help you repair your bike correctly. 

Compatible with all types of bikes: MTB, hybrid, road, and city.

Fitted with foam inserts for easy opening and closing.

Easy opening/closing

The Plus repair toolkit includes everything you need to take care of your drivetrain and brakes. A great way to pamper your bike and do more things yourself. 

The Plus repair kit contains 8 tools:
- Quick-release clasp
- Crimping pliers for cables and housings
- Chain tool
- 8 mm Allen key + adaptor
- Freewheel remover (lug wrench)
- Cassette remover 
- Chain whip

Toolkit description

- Chain tool 
Used to remove, shorten, or repair chain links safely. Place the link to be opened in the recess on the tool. Once the chain tool screw is aligned with the rivet, turn it to push the rivet out.

- Cable and sheath cutter
Crimping pliers for cutting brake cables, brake housing, or derailleur housing cleanly and safely.

Contents (part 1)


- Quick-release clip
Used for removing and installing the chain’s quick link. Makes it easy to remove links during repairs. 
- Freewheel remover
Removes the rear freewheel. Works with a 24 mm flat spanner or 8 mm Allen key.
- Cassette remover
Used for replacing a worn cassette or adapting the transmission. Works with the same tools as the freewheel remover.

Contents (part 2)


- Chain whip
Essential for locking the cassette during disassembly to prevent it from rotating.
Compatible with most multi-speed cassettes. The numbers 10, 11 and 12T on the tool refer to the number of teeth on the smallest sprocket. Count the teeth on your smallest sprocket and set the removable pin to the matching number to lock the cassette before loosening it.

Contents (part 3)

An intuitive layout keeps every tool in its place.
The snug foam insert eliminates the hassle of tools falling out when you pack up—each tool fits neatly and stays secure, even when the box is closed.
The Plus toolkit is also designed to complement the Start and Ultim toolkits.

Product benefit

Our toolkits are designed to help you carry out your own bike repairs and maintenance, from the most basic jobs to the most technical.
The Start kit covers essentials such as repairing a puncture, adjusting the saddle or derailleur, and changing pedals or tires. 

The Plus kit takes you further, letting you replace the chain, cassette, brake cable or derailleur. 

The Ultim kit, designed for experts, allows you to change a bottom bracket, remove a wheel or service a hub.

Note

If you run into any issues, our technicians at your nearest Decathlon store will be happy to assist.

Need help?

- Length: 32 cm (12.6″)
- Width: 16 cm (6.3″)
- Height: 4.5 cm (1.8″)


Dimensions

Lost or damaged one of your tools? No problem. Just order the broken or missing part on our website.

Repairability

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Sitting comfort

Wide elastic and silicone strips at the thighs.

Stability

Quick drying thanks to active sweat-wicking fabric.

Moisture management

Super handy pocket on the outside of the thigh for easy access while riding.

Pockets

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

Sports/

Cycling/

Bike Accessories/

Bike Hydration/

rockrider

Side access cycling bottle cage