Long foam grip so you can position your hand at different heights

Ergonomic grip

Ergonomic wrist strap equipped with an ejection system in the event of a fall

Stability

Ease of use

Compact design

Weight

This telescopic pole has been designed for freeriders whose playground isn’t limited to the slopes accessible by ski lifts. 

Adjustable Walking Pole

Type of washer

Skill Level

Wrist Strap Type

Collapsed Length

Handle Covering Material

Tip Type

Number of Part(s)

Walking Stick Type

handle length

tube diametre (in mm)

Main Material

With Wrist Strap

When cross-country skiing or skiing off-piste, it has been shown that wrist straps increase the risk of injury in the event of a fall.
In the event of an avalanche, the pole and its wrist strap can also act as an anchor and increase the risk of becoming buried under the snow.
To reduce these risks, we have developed a removable wrist strap that detaches in the event of a fall.

Why use a removable wrist strap?

The poles have 95 mm wide baskets for good lift on soft snow.
They are designed to improve thrust on flat terrain thanks to the softer section. This makes it easier for you to progress during your cross-country skiing approaches.

Features of the baskets

The tungsten tip allows you to sink the pole into all types of snow, even the hardest.

What material is the tip of the poles made of?

Several parts of the pole are repairable and available at Decathlon: 
- The lower section, also called the tube or segment
- The baskets that screw in
- The wrist strap
You can get more information in the shop.

Are the poles repairable?

Ski Poles

Compatible with bags equipped with carrying straps for skis/snowboards.

Compatibility

Easy to attach to your pack with its four hooks.

Secure buckle to prevent the loss of your ski helmet.

Content protection

Practical pocket for storing the ski helmet holder in small spaces.

Do you have a ski bag without a built-in ski helmet holder? Optimise your sports activity with our universal ski helmet holder.

Volume (L)

Weight (g)

Customization

Fastener Type

First, attach the first three hooks of the helmet holder to the carrying straps on the side of your backpack. 
Then slide the ski helmet under the ski helmet holder and attach the last hook. 
Then adjust the straps to tighten the ski helmet securely under the helmet holder.

Please note: remember to close the safety hook to avoid losing the ski helmet holder when it’s not being used to secure your helmet.

How to use the ski helmet holder

Our ski/snowboard helmet holder is compatible with all bags that have four straps or attachment points on the sides/front of the bag.

With which bag can our ski helmet holder be used?

Men's Backpacks

The side zippers make them easy to put on and take off with your skis on.

Easy opening/closing

Windproof

The fabric is waterproof and water-repellent.

Water repellent

The waist has been redesigned to improve support.

These overpants with their full-length zippers provide protection from the wind and can be taken off without removing your skis when the temperature rises. 

Maximum wash temperature of 30°C. Very delicate cycle.

Condition

Intensity

Season

reinforced area

waterproof seam

Number of Pockets

belt height

reflective

Type of Brushing Boots

Weather Conditions

Place of Practice

Waterproof

modular

Type of Layer

Pocket

RECCO system

Practice Motivation

Type of Length

Type of Bell

Style

An excellent companion to take on the cold and/or wind, these overpants let you adjust your outfit during your cross-country ski trips.

Overpants for protection from the changing temperature and weather conditions

Following feedback from customers, our new range of cross-country ski clothing has been designed with a tightening system around the ankles. The pants don't rub when your feet cross and you can ski with no discomfort.

Ankle tightening: the detail that’s changed a lot

While they’re designed to be worn over cross-country ski leggings, these overpants can also be worn against the skin with their soft, comfortable lining.

Overpants that can be worn as a first layer

Although designed for cross-country skiing, these overpants are obviously adapted to any other use requiring additional protection in the event of a sudden change in conditions (snowshoe hiking, ski touring, etc.).

For cross-country skiing, and more!

When skiing, the rule of the 3 layers: A first thermal layer (high-tech ski base layer), a second layer (fleece or down jacket) and a third layer, your windproof and/or waterproof jacket. 
Adapt the layers according to your level of physical effort and the weather.

Dressing for cross-country skiing: stay warm and dry

Women's Hiking Pants

onlyonline

The 110 mm (4.3”) width is compatible with many skis.

70% mohair and 30% synthetic skins; the perfect blend for good glide performance

Glide performance

Mid-length hair skins offer excellent grip when climbing.

Traction

The glue over the entire surface of the skin sticks perfectly to the ski.

Grip

These cut-to-fit skins are designed to replace your old backcountry ski skins for a good grip when climbing.

In response to customer reviews on our website, we decided to add skin netting in September 2020. Store the skins on the net to keep the glue fresh.

Product upgrade: ski skin netting

The skin is 110 mm (4.3”) wide and 185 cm (72.8”) long and is suitable for skis up to 95 mm (3.7”) underfoot for an ideal trim.
Kit supplied with cutter to trim and adjust the skins to fit the width and length of your skis.

Trimming skins

Front clip system can be used on all ski tips.
The cam lock system at the back allows for fine adjustments and excellent skin-to-ski hold.

Fastening system

Wedze backcountry ski skins are designed so you can repair them if needed. Please note that you can replace the front and rear sections of our skins. To do this, simply consult a Decathlon assistant, who’ll be able to explain what you need to do.

Repairs

It’s also possible that after several seasons of use, the glue underneath the skin has worn away (creating little glue clusters). You can find DIY glue repair kits in our stores or on our website.

Care instructions

Look online for ski touring information and advice: how to attach your skis to your pack, how to attach skins to your skis, etc. 

Online advice

Backcountry Skiing

Ideal for spring and autumn.
Recommended temperature: 8°C
Limit temperature: 3°C

Warmth

Stretch

Reinforced coating on the palm reduces abrasion.

Abrasion resistance

Tactile efficiency

Polyester knit for breathability and keeping your hands dry.

Breathability

Pairing buckle lets you clip the gloves together. Ideal for storing them.

These gloves are designed for mid-season hikers to provide warmth and dexterity in cool weather.

Maximum washing temperature 30°C. Normal cycle.

abrasion 

Frequency

Reinforced Palm

Options

Air Temperature

anti-slip

leash

Tightening Type

All our gloves are lab-tested on a thermal hand. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h winds. These temperature ratings are only valid in walking conditions. The MT 500 Hiking Gloves have a warmth rating of 1 out of 5. Recommended temperature: 8°C | Limit temperature: 3°C

How is usage temperature measured?

Just like you wear several layers of clothing when hiking, you can wear liner gloves under your gloves that will act as a thermal base layer. This multi-layer system enables pockets of air to form around your hands, efficiently insulating them from the cold. Remember to wear large enough gloves so your fingers do not become constricted. Compression reduces blood circulation in the fingers.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If clothing isn’t warm enough, your body cools down and circulation to your hands and feet drops to keep your core warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

Dexterity refers to your ability to handle objects while wearing gloves. Our MT 500 Hiking Gloves have been rated in a laboratory. The closer the glove’s dexterity is to 5, the easier it is to handle objects while wearing gloves. For example, we tested the MT 500 Hiking Gloves for putting on and opening a jacket, handling objects in a bivouac, and eating and drinking. The MT 500 Hiking Gloves have a dexterity rating of 4 out of 5.

What is a glove’s dexterity?

The MT 500 Hiking Gloves are not windproof.
Did you know that the wind can make you feel colder? An outdoor temperature of 0°C with a wind speed of 20 km/h feels like -10°C. The windproof components reduce the wind chill resulting from the cooling effect of the wind.
For complete protection from the elements, pair them with our MT 500 Hiking Waterproof Over-Gloves.

Are these gloves windproof?

Avoid placing the gloves on a heat source to dry. This could damage the fabric and they could lose their shape.

Did your liner gloves get wet?

Cross-Country Ski Gloves

Lightweight

A kit that you can assemble yourself.
Contains:
6 rivets (4 for the assembly + 2 extra)
2 elastics 
2 washers
1 cutting template The cardboard packaging can be used as an aid to cut the skins to the correct size.

Kit contents

Ideal for competition skis so that the skin can be removed very quickly.

Can also be used with all notched skis for quick and easy removal without to take your skis off.

Sports/

Our Brands/

Simond/

simond

Elastic Skin Attachments for Notched Skis