1 adjustable carry strap for easy transport. 
2 compression straps. 

Easy transport

No need to refold your rope after each session thanks to these 2 straps.

Ease of use

Heavy-duty cover (600D polyester) protects rope from the ground.

Flexibility

Designed to hold up to 100 m (110 yd) of rope.

Capacity

This bag is designed to hold and protect climbing ropes for indoor or big wall climbing.

Condition

Skill Level

Weight (g)

Number of Pockets

Type of Cover

Waterproof

Foldable

carrying system

Number of Compartments

Fastener Type

Weight

Bags & Ropes

Major axis 22 kN, minor axis 8 kN, open gate 7 kN.

Breaking resistance

Easy opening/closing

Lightweight

This carabiner is designed for connecting a belay system to a harness or ensuring climber safety during rope manoeuvres.

Carabiner Shape

Lock type

Type of Snap Hook

Anti-Cross-Loading

Gate Opening

Main Material

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

The carabiner must be cleaned with fresh water and dried away from a heat source. Do not use chemicals.
For more details, refer to the instructions for use.

Product care

Store the carabiner in a dry, cool, well-ventilated place, away from UV rays and chemicals.
For more details, refer to the instructions for use.

Storage guidelines

Guidelines for use

The carabiners are certified in line with: EN 12275: 2013 and UIAA 121: 2018

Certification

Gear

onlyonline

Features teeth on the side for easy setup on the rope

For an 8.9 mm (1/3") by 11 mm (2/5") single rope or a 7.5 mm (1/4") by 9 mm (1/3") half rope.

Compact design

Single belaying/abseiling system, intended for indoor climbing or rock climbing activities.

type of belayer and descender

Type of Climbing Rope

belaying a second climber

This belay has 2 V-shaped brake grooves to slow the climber's descent.

Braking principle

If the system is dirty, clean it with fresh water and dry it away from heat sources. Do not use chemical products.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the system in a dry, cool, and ventilated place, away from UV rays and chemicals.
 For more details, refer to the instructions for use.

Storage and transport

Product in line with the standard EN 15151 -2 2012 and UIAA 129

Seam resistance is greater than a webbing knot.

Abrasion resistance

Available in 3 lengths (60, 120, & 175 cm [24/47/69"]) depending on your needs.

Tubular ring for multiple uses in mountaineering, climbing, and all vertical sports.

Diameter

Rope Length (cm)

Adjustable Length

Style

Hook Type

Elastic

Length (cm)

Product certified in line with the EN566:2017 standard

Standards

The Z-shaped rip tab makes them easy to put on and tighten as required.

The outsole is made of resin rubber for good grip and durability.

Grip

The rigid outsole keeps your foot comfortable on narrow holds.

Rigidity

The shape of the toe area and edges offer greater precision on holds.

Precision

Are you a beginner climber who goes climbing occasionally? These shoes with a modern design provide sufficient grip for those first climbing routes.

type of lining

Removable Sole

Shoe Shape

Practice Motivation

resealable outsole

Foot Width

Sole Type

Tightening Type

We have designed these shoes to have a straight shape with a flat profile, aligned with the natural shape of the foot. This provides greater comfort.

What shape are the First Klimb shoes?

Our 1st tip is to never machine-wash your shoes. Thermal and mechanical stress could damage them. We recommend that you wash them by hand, either with a sponge soaked in clean water or with a sponge soaked in soapy water (Marseille soap), being sure to air-dry them at a stable temperature and avoid drying them on a radiator or in direct sunlight. We recommend washing them regularly to increase the life span of the shoes.

How to maintain your First Klimb shoes

We recommend choosing the same shoe size as your everyday shoes, or 1 size larger if you want even more comfort or if you have wide feet. They should feel tight without hurting. If you are a beginner or are at an intermediate stage, it is important not to select shoes that are too tight to avoid painful feet and to allow your feet to develop their mobility, strength, and proprioception.

How to choose the right size of First Klimb shoes

Shoes & Harnesses

Impact protection

Ventilation

ABS shell construction protects helmet from everyday scratches

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Detachable Visor

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Helmets

Highly resistant to repeated folding and high levels of friction.

Elastic cordelette to really bite into narrow ropes.

Compatibility

Extremely lightweight—30 g compared to mechanical systems.

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Weight:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

Diameter:

Red visual indicator is visible when carabiner is open.

Strength
Major axis:  25 kN
Minor axis: 10 kN
Open gate: 7 kN
Opening (mm): 24

Technical features

2 large EVA foam pads on the thighs for added comfort.

User comfort

Single visible tie-in loop makes it easier to rope in and avoid errors.

The harness can be slipped on like salopettes.

Easy dressing

Harness for children from 4 to 9 years old. Must be adjusted by an adult.

Anatomic design

Our instructors and climbers designed this full harness for young climbers from ages 4 to 9 and weighing less than 30 kg (65 lbs) to safely discover climbing

Adjustment Type

Waist Belt Adjustment

The innovative Check&Go system on the back teaches kids to check over the joint verification of their safety equipment before climbing. 
Red side: the double-check hasn’t been done—do not climb.
Green side: the double-check has been done—you can climb!

"Check&Go" system

2 adjustment buckles allow you to fit the harness to the child.
Adjustment should be carried out by an adult.

Adjustment

For children under 30 kg (65 lbs), with a chest height of between 40 and 50 cm (15" and 20") and a waist of 45 cm (18") maximum.

Sizing tips

We recommend washing your harness in warm, soapy, pH neutral water at 30°C maximum. Rinse thoroughly with tap water (do not use high water pressure).Dry your harness on a drying rack. Do not tumble dry.

Care instructions

CE-certified product according to EN 12 277+A1 2018

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

Durability

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Versatility

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Number of Carabiners

Ideal for securing accessories when climbing or mountaineering.

Can hold a maximum of 400 kg without breaking.

A low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Floatability

Rope Length (m)

Static strength:

- Please note that this cord is static
- It should only be used as a backup for climbing, mountaineering, caving, or working at height.
- It will not absorb energy.
- It should not be used as a belay rope.

Restrictions of use:

Standards/certification

Ergonomic design and bonded assembly to reduce friction points.

1 buckle for waist adjustment 
Adjustable elasticated thighs.

4 gear loops designed for ergonomics and comfort;
2 ice screw straps

Our designers developed this technical harness for comfortable climbing on the most vertical walls, on cliffs or multi-pitches, and for mountaineering.

tie-in-loop

gear loop

Size S =>Waist size: 76-82 cm (30" - 32")
Thigh size: 47-53 cm (18 1/2" - 21")
Size M =>Waist size: 81-87 cm (32" - 34") Thigh size: 50-56 cm (20" - 22")
Size L=> Waist size: 86-92 cm (34" - 36")
Thigh size: 52-58 cm (20 1/2" - 23")
Size XL=>Waist size: 92-98 cm (36" - 39")
Thigh size: 54-60 cm (21" - 24")

➡1 x 20 mm (4/5") aluminum buckle (lightweight) for size adjustment.
➡2 elasticated legs for improved comfort while climbing whilst also being adjustable to ensure this harness adapts to all body types and layers of clothing.

Adjusts to fit all body types

Our design team has worked on every detail to provide comfort and freedom of movement:
1- Ergonomic design of the waistband and legs to conform as closely as possible to the human body;
2- Soft and elastic components with an internal waffle component to help manage perspiration;
3- A complex "EVA foam (3 mm [1/10"]) + 1 or 3 straps" to support weight well according to different areas;
4- A bonded assembly to reduce seams and therefore areas of discomfort.

Comfort details

➡The 2 gear loops on the front are wide, rigid, and outward facing for excellent accessibility to quickdraws and carabiners.
➡The 2 gear loops on the back are flexible to reduce areas of discomfort when the climber is wearing a backpack.
➡1 rear loop for those who like to hang their chalk bag directly on the climbing harness or haul rope on multi-pitch routes.
➡2 straps for hanging the ice screw holders.

Gear holder

Size S: 380 g (13 oz.)
Size M: 400 g (14 oz.)
Size L: 425 g (15 oz.)

Chlorine resistance

Comfort temperature: 0°C; comfort limit: -5°C. Synthetic insulation filling

Optimum temperature

Size L. Weight: 1,400 g (3 lb) Vol.: 12.9 L Carrying bag.

Zipper along 3/4 of the bag's length equipped with an anti-snag system.

Adjustable hood with elastic cord and drawstring.

Adjustable

Surface-treated outer fabric (PFC-free) that repels water.

Water repellent

This trekking sleeping bag has a mummy shape with a full hood, designed for your nights bivouacking in temperatures between 0°C and -5°C. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Sports/

Outdoor/

Climbing/

Bags & Ropes/

simond

10 mm x 60 m Climbing Rope - Klimb