clearance

Brush up against nature! The durable fabric won’t get snagged or wear out.

Resistant

Sitting comfort

Special regular cut and stretch fabric for riding comfortably.

Freedom of movement

Stability

With bike shorts that effectively wick away perspiration.

Moisture management

Take everything you need with you in the zippered pocket on the right thigh.

Pockets

Weight

These mountain biking shorts are designed for warm weather. Elastic waistband and secure pocket.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Duration

Intensity

Skill Level

Season

reinforced area

Number of Pockets

retaining strip

Weather Conditions

Place of Practice

Stitching Type

Practice Conditions

Pocket

Type of Length

Type of Bell

Style

Undershorts

Zipper Type

With Straps

Main Material

Our model is 1.87 m (6’1") tall and weighs 77 kg (170 lbs). He is wearing a size M top and size L bottoms

Inside leg: 28.5 cm (11") in size L.

Model’s measurements

Built-in undershorts: Yes
Type of fastening: Buttons
Adjustable waist: No
Built-in waistband: No
Number of pockets: 1
Resistant to vegetation: Yes

In a nutshell

This foam pad is designed for occasional users wanting to improve at mountain biking. The support foam is soft with medium firmness. It provides good user comfort and protects the cyclist’s pressure zones for rides of up to 1.5 hours. 

Foam thickness: 13 mm (1/2”)
Foam density: 65 kg/m3 (4 lb/ft3)
Foam firmness: 25 kPa (3 1/2 psi).

A base layer with added comfort.

For carefree riding, plan ahead and keep the essentials handy:
- On your right, a secure pocket (17 cm x 15 cm [7" x 6"]) with a zipper that’s easy to open (even with gloves on!) so you can access items you need while riding with only one hand, such as your tissues, tire lever, etc.

One secure pocket

When mountain biking, gloves are often the last thing you put on and the first thing you take off. These shorts have a buckle on the waist so you can keep your gloves handy without putting them in your pockets. You can snap your ST 100 and ST 500 Gloves to the shorts with the press stud and keep them handy at all times.

Keep your gloves handy!

Find detailed info on care instructions for mountain bike clothing on our website

Care instructions

Based at the Btwin Village in Lille, our product design team constantly works to make Biking more comfortable for our users.
Our goal is to create products that respond to our users’ needs and promote a good Biking experience.


Product tests

Men's Sports Shorts

Stretchy enough to fit different head sizes.

Anatomic design

A lightweight product that's easy to wear in hot weather.

Lightweight

The perfect protection for cycling in warm weather.

Condition

Type of Beanie

Bike Helmets

Breathable, honeycomb fabric for effective perspiration wicking.

Quick drying

Designed for cycling in warm weather, this base layer wicks away perspiration and dries quickly. 

Maximum wash temperature of 30°C. Very delicate cycle.

Frequency

Collar Type

sleeve length

Waterproof

anti-uv

Men's Base Layers

The pre-shaped pad adapts to your body for enhanced comfort during wear.

Actively wicks perspiration for quick drying.

Fitted cut, without compression and very elasticated waistband

Featuring elastane in the fabric for guaranteed freedom of movement

Stretch

these bike shorts are compatible with mountain biking shorts.

Compatibility

These undershorts have been designed for mountain bike rides lasting 3 hours on average.Also suitable for bikepacking and gravel riding.

pad type

belt height

Reversible


Foam thickness: 13 mm
Foam density: 100 kg/m3
Foam firmness: 25 kPa
Vegetation-resistant:No

To guarantee the support you need even without straps, we made a pair of bike shorts that hugs your body just like boxers. The elasticated waistband adapts to your body shape and stays in place.

Undershorts support

The pad has been designed for occasional cyclists looking to progress in MTB. The foam features flexible zones for guaranteed freedom of movement. The pressure zones are firmer to enhance comfort during your outings.

Feel like a second-skin

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Wide elastic and silicone strips at the thighs.

Quick drying thanks to active sweat-wicking fabric.

Super handy pocket on the outside of the thigh for easy access while riding.

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

The Endurance collection is for all cyclists looking for comfort, no matter the distance. 

Our designers and engineers pay particular attention to your comfort on the bike at every step of the design process. 
Our aim: make you (almost) forget what you’re wearing and simply enjoy the pleasures of road cycling.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:

• Discover: simple, effective products, suitable for beginner cyclists

• Endurance: main collection for experienced cyclists looking for comfort for their cycle outings.

• Endurance Ultra outfits specially designed for long-distance and touring cyclists.

Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- silicone elastics around the thighs for excellent hold when pedalling
- a fit that is close without compression, so you can forget you're wearing it
- two easily accessible side pockets

How our Endurance cycling shorts were designed

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle.

Developed for men’s bodies, it is made of stretch layers that follow your body’s movement when pedalling.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. Both in the ischial and perineal areas. It has a protective, high-density, 120 kg/m³ foam insert. The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. 
All layers are extremely breathable.

Breathable, high-density foam

The cut is designed to provide better freedom of movement while mountain biking.

The breathable fabric keeps you dry throughout your ride.

Compact design

Zippered pocket in the back for carrying small items. 

Lightweight and comfortable to wear. 
170 g (6 oz) in size L.

This long-sleeved jersey is designed for your first mountain bike rides in warm weather. Compact, regular cut and durable material on the sleeves.

Our model is wearing a size M top and size M bottoms.He is 1.83 m (6’) tall.

Sizing Information

Gender: Men’s
Sleeve type: Long
Cut: standard
Number of pockets: 1
Resistant to vegetation

Tightly woven fabric allows you to ride along trails without worrying about branches and leaves.
The result? A real mountain biking jersey that resists vegetation and friction from the straps of your hydration backpack.
The material also offers good ventilation!

Resistant to friction

This mountain biking jersey is both sporty and relaxed!
The cut and seams are designed to prevent friction and keep you as comfortable as possible while riding.
For example: the back of the jersey is long enough to keep your back covered when leaning over your handlebars.

Straight cut

Plan ahead and keep the essentials handy:
 - On your right, a secure pocket (16 cm x 11 cm [6 1/3 x 4 1/3”]) with an easy-to-open zipper (even with gloves on!) so you can access whatever you need while riding with one hand, such as your tissues or tire levers. 
- The jersey material is very stretchy; we recommend using it for lightweight items.
- You can pack the jersey down into this pocket for easy transportation and storage. 

Length: 16 cm (6 1/3”)
Width: 10 cm (4") Height: 5 cm (2")

Packed size

Find detailed care instructions for mountain bike clothing on our website

Wear a helmet and gloves when mountain biking: not just for falls, but also to protect yourself from low branches! For comfort, wear a pair of padded shorts to prevent chafing. A water bottle or hydration backpack will keep you hydrated. And finally, puncture repair spray so you can finish your ride without needing repair tools.

Advice from the team

Based at the B’twin Village in Lille, our product design team constantly works to make biking more comfortable for our users.
Our goal is to create products that respond to our users’ needs and promote a good cycling experience.


Men's T-Shirts & Tank Tops

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Ease of use

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

The fleece lining provides effective protection from the cold. 210 g/m²

Warmth

Breathability

4 back pockets (1 zippered)
2 side pockets (1 zippered)

Full-length zipper for good ventilation during intense workouts

Ventilation

If you want to keep riding in cooler weather, the RC 100 Jersey is ideal.

Top Shape

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower its resistance, the more perspiration escapes and the more breathable it is. •	RET < 6: extremely breathable, suitable for intense workouts
•	RET 6 to 12: very breathable, designed for moderate exercise
•	RET 12 to 20: average breathability, not comfortable for intense exercise
• RET >20: little breathability, inappropriate for exercise

Fabric breathability
RET 5.16

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Ultra-lightweight and breathable fabric that actively wicks away perspiration.

Stretchy bands at the ankle and arch keep these socks in place.

Lightweight socks for greater comfort while cycling.

Designed with a thin polyamide weave, these mid-length socks dry quickly, keeping you comfortable in summer.

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

Packaging

Sock Height

Whether you use your bike for daily errands or for competitive racing, cycling is hard on your feet. Friction combined with perspiration can feel very unpleasant. Wearing specially designed socks can significantly increase your comfort!

The lightweight fabric wicks away perspiration for an extra comfortable ride.

Why wear Btwin Bike Socks?

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not use bleach. Do not place on a heater to dry.

Low socks measuring 10 cm (4") high in men's size 6.5-9 (women's 8-10.5).
There's very little height variation between sizes.

Sock height

Men's Socks

Very thin material for better moisture management.

Elastic bands at the ankle, the arch of the foot, and the tibia.

High-quality technical socks that go up to the base of the calf.

Socks developed in collaboration with Trerè Innovation srl in Italy to meet the needs of the most demanding cyclists; inspired by the products worn by professional cyclists. 


Development 

Mid-rise sock measuring 20 cm (8") high in size 6½-8.
The height doesn't vary much between sizes.

Wide gel inserts on the palm to filter handlebar vibrations.

Cushioning

Fitting comfort

Very thin and elastic material feels very pleasant against the skin.

Stretchy fabric on the back adapts to different hand types. 

Designed for professional cyclists as part of a technical partnership between Van Rysel and other professional teams.

anti-slip

Tightening Type

Cycling Gloves

Absorb impacts while delivering exceptional flexibility and comfort.

Impact protection

D30 pads blend in with clothes so you'll completely forget you're wearing them

Elasticated silicone bands hold them firmly in place

Made of materials chosen for their excellent perspiration-wicking capacity

Resistant pads that are light, breathable and sturdy 

S: 261 g
M: 271g Size L: 284g
Size XL:296 g (28 oz.)

Designed for mountain biking, D3O® Ghost™ Reactive pads combine lightweight construction and breathability with optimal protection.

Support Type

Protection Area

Protected part:Knee
CE Certification:Complies with Regulation (EU) 2016/425, which applies to personal protection equipment.
Technology:D3O® Ghost™ Reactive
Type of protection:Flexible
Type of fastening: To put on

In a nutshell:

D3O® Ghost™ Reactive: reactive technology absorbs impacts while delivering exceptional flexibility and comfort.

Impact protection technology

Turn the product inside-out before washing
Wash at a maximum temperature of 30 degrees Celsius.Do not tumble dry. Do not iron.2. Hang up to air dry

Washing instructions

Don' t let falls spoil your fun.With our lightweight and breathable knee and elbow pads, you'll enjoy complete freedom of movement while staying protected.Designed for mountain bikers, they'll back you up you on every climb, every descent, and every challenge, without ever getting in your way.

So comfy you'll forget all about them... until the moment of truth, when they'll make all the difference.Ride with confidence, dare more, explore further

FORGET YOU'RE WEARING THEM AND RIDE!

Take on any trail with confidence, wearing our knee and elbow pads designed to withstand any challenge!Lightweight, breathable, and resistant, they'll accompany you on all your outings without compromising on comfort or freedom of movement.

A PRODUCT THAT WITHSTANDS ANY CHALLENGE

Flip the silicone band over to effortlessly slip the pads on.Wear them directly on the skin under your undergarments, shorts or trousers.

Easy to put on and take off.

The reusable pack can be used to transport and store them

Sports/

Sport Accessories/

Safety & Protection/

Winter accessories/

rockrider

Breathable Mountain Bike Gloves, 100