clearance

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatibility

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Tire Assembly

Skill Level

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Ease of use

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Condition

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

Adjustable

Attaches using a 17 mm flat spanner or 8 mm Allen key. 

Designed for parking a bike weighing maximum 35 kg (including baggage).

Weight (g)

Position

removable

Foldable

Maximum Load

Attachment

Attachment Type

Main Material

Item Weight

The 500 central stand attaches near the chainset. A central plate provided for bikes without screw holes (sold with the product). Not suitable for bikes smaller than 24 inches.

Where does it mount onto your bike?

Given the variety of bikes, frame shapes, and bottom bracket heights, we recommend asking our sales assistants for help. Not suitable for bikes smaller than 24 inches.

What kind of bike is it for?

Bike Kickstand

700 x 35 to 700 x 45 tires. 48 mm (2") valve. ETRTO 35/45 – 622

Designed for replacing the inner tube of your 700 diameter, 35 to 45 section tires with a 48 mm (2") Schrader valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 700 x 35 means that the tire is 700 mm in diameter and 35 mm wide.
The dimensions in mm are also on the tire sidewall.
For example, 36-622 means that the tire is 35 mm wide with a 622 mm inner diameter (approx. 700 x 35).

Our professional advice

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Frequency

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

Remove the old inner tube using a tire lever.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Easily attach your hook using 2 screws (not supplied).

Flexibility

Hang any type of bike by the front or rear wheel.

This hook is designed for you to optimise your storage space by hanging your bike on the wall or ceiling.Screws not included.

Maximum Bike Weight

Number of Bicycles

Weight: 330 g
Product dimensions:20/10/10 cm 
Maximum space for wheel:100mm
Space between the two mounting screws: 93 mm (17 1/3")

Characteristics

Number of bikes:

This bike rack is compatible with all types of bike, from 16 to 29" (including electric bikes) for a maximum weight of 30kg per hook.

For which type of bike?

Before attaching your bike storage hook, remember to allow enough space between your ceiling and your hook (around a half-wheel of space) to easily hook and unhook your bike.Adapt the fasteners (wall plugs and screws) to the type of wall and ask a professional for advice if needed.

Our advice for mounting your hook:

You can install your hook on the wall or ceiling in 2 different ways:
- Perpendicular to the wall (with the two mounting holes vertical), for storing the bike with tyres pressed against the wall 
- Vertically (with the 2 mounting holes horizontal), for hanging your bike parallel to the wall

Mounting: 

Storing your bikes properly will extend their lifespan by protecting them from impacts, scratches and wear from bad storage.Optimised storage frees up space, creating a more organised and practical environment.A well-stowed bike is always ready to use..

Why should you I store my bikes properly? 

Warranty: 

Bike Racks & Stands

Length suitable for all road bike handlebars.

Peach skin effect tape for an unbeatable feel (100% EVA)

User comfort

Developed to provide excellent grip and added comfort.

Bike Handles & Grips

onlyonline

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Intensity

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Automatic adjustment to the child's head size

Impact protection

Weight: 250 g (9 oz.) in size S / 290 g (10 oz.) in size M

Lightweight

Ventilation

Ride safely! We designed this helmet to protect children's heads on their mountain or road bike rides.

Adjustable Helmet

Ventilation Zippers

anti-insect grid

Technical Lens

Season

helmet compatible with

protection technology

ear pad

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Weather Conditions

integrated lighting

Bluetooth Connection

Practice Conditions

detection system

RECCO system

Customization

Style

Certification

Detachable Visor

Fastener Type

We've designed an automatic head size adjustment system for this helmet.

So, once you've chosen the right size (S: 52 to 55 cm [20 1/2 to 21 1/2"] or M: 55 to 59 cm [21 1/2 to 23"]),
and adjusted the chinstrap for the 1st use,
all the child has to do is put the helmet on their head.

A paddle hugs the back of the head and adjusts the helmet perfectly to the child's head size.

An automatic adjustment system for a perfect fit around the head every time: 


S: 52 to 55 cm (20 1/2 to 21 1/2")
M: 55 to 59 cm (21 1/2 to 23")

Size–Head Size Conversion:

Technology:

EN 1078 is a European standard for testing methods and requirements for cycling, skateboarding, and skating helmets.
This standard covers the following aspects: - construction, including field of vision
- shock absorption properties
- retention system features including the chinstrap
- tightening devices
- marking and information.

Complies with standard EN 1078: 

A helmet is a personal protective equipment (PPE) item.
Ensure this product is suitable for you (model/size/colour) before purchasing.
If it is not, you may return it under the following conditions: with the instructions, labels and, if applicable, original packaging. It can then be reused. Together, we can care for our planet.

Return conditions for personal protective equipment

Bike Helmets

Volume: 20 L. Max. load: 10 kg (22 lb).

Capacity

Waterproof fabric and seams. 
Splash-proof (IPX4).

Universal adjustable pannier rack mount.
Attaches from the bottom using a strap.

Attaches to the right or left of the bike. Carry handle.

Designed to keep your gear dry. Waterproof.

Volume (L)

Height (cm)

Bag Type

Panier Type

Number of Compartments

This product has a hook to attach Vioo Clip products. The Vioo Clip is a rechargeable LED light that can be clipped on anywhere and removed in an instant.


Visibility.

This bag is equipped with a Vario by Klickfix clip. The hook can be adjusted by screwing it to fit pannier rack tube diameters from 8 to 16 mm. A centre lock lets you lock the bag to avoid it falling.

Pannier rack compatibility.

The bag’s waterproofing was improved with a fabric that better stands up to water during prolonged exposure.
This bag meets the IPX4 standard.
An IPX4 rating means the product is suitable for all weather conditions and resistant to water splashes from all directions. However, it is not resistant to immersion.

Waterproofing

Wash the bag with soapy water. Never use detergent, alcohol, or any product that could damage the fabric.

Product care

Height: 58 cm (22.8")
Width: 35 cm (13.8")
Depth: 12 cm (4.7")
Distance between hooks: 10.5 cm (4")

Dimensions

Bike Bags & Backpacks

Replaces the chain of your 3- to 8-speed bike. Compatible with 3- to 8-speed Shimano, Campagnolo and SRAM derailleurs

Number of Speeds

Number of Links

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

Mounting

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Dismantling

Number of links

Bike Chains

Wide field of vision and offset pivoting arm.

Visual efficiency

Attaches to the bar end of a 22.2 mm (7/8") diameter handlebar.

Keep an eye on your blind spots and see what’s behind you when cycling around town.

Assemble With Tools But Without Tools Provided

Bike's Lights

Apply with a brush or with the chain cleaner

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

riverside

Hybrid Bike Tire – RoadProtect 28" x 1.85" / 700 x 47 mm