clearance

Wide and convex for a better field of vision. 3D adjustment

Visual efficiency

Attaches to the bar end of a 22.2 mm diameter handlebar. 

Compatibility

Lightweight

This rear-view mirror makes it comfortable to look behind you when cycling.

Condition

Frequency

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Main Material

Bike Stem, Posts & Clamps

29" diameter tires with a 1.90 to 2.50 cross-section.  

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 29" tires, with a 1.90 to 2.50 cross-section and a 48 mm Presta valve.

Tire Assembly

Intensity

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 29 x 1.90 means that the tire is 29" in diameter and 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-622 means that the tire is 50-mm wide with a 622-mm inner diameter (approx. 29 x 2.00).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

Removal using an open-ended spanner and a chain-whip tool.

Removal using a 21 mm open-ended spanner and a chain-whip tool.

Ease of use

Robustness

This tool was designed for removing and/or mounting your Shimano or Sram type cassette

A chain-whip tool is needed to use this tool for dismounting a cassette.
The chain-whip tool prevents the cassette from turning, so that the support nut can be unscrewed.

Advice from our team

Bike Cassettes

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Skill Level

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

700 diameter tires, 23 to 32 mm cross-section
60 mm (2 1/3") Presta valve

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 60 mm (2 1/3") Presta valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50-mm wide with an inner diameter of 584 mm (27.5 x 2.00).

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Our professional advice

27.5" tires, with a cross-section from 1.90 to 2.50. 
ETRTO 47/64 – 584

Compatible with 27.5 diameter tires, with a cross-section ranging from 1.90 to 2.50 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width).
For example, 27.5 x 2.10 means your tire is 27.5" in diameter and 2.10" wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall. For example, 50-584 means that the tire is 50-mm wide with a 584-mm inner diameter (approx. 27.5 x 2.00).

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip. A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Puncture resistance

Traction

Weight

Mounting: Inner tube (not tubeless compatible)
Tread: folding bead
Carcass: 30 TPI
Composition: mono-compound
Terrain: roads and trails
Puncture protection: Yes - level 3/5
Electric bike / E-bike compatible: Yes
Reflective strip: No
Weight: 550 g (1.2 lb)
Rim compatibility: between 17c and 30c.

Technical information

The CrossProtect hybrid bike tire features a polyamide band under the tread.

We tested this protection in the lab. It earned a score of 3/5.

What is this tire's level of puncture protection?

We measure a tire's puncture resistance in the lab. The perforating elements are calibrated to mimic the spines, glass shards, etc that you may encounter on roads and trails. Depending on its resistance, each tire gets a score from 1 to 5/5. 
The strongest tires on the market get a score of 5/5.

How do you measure a tire's puncture resistance?

Decathlon workshops can change your tire for you. Contact your nearest store for more information.

How to change a tire

Inflate the tire with caution. The minimum pressure for this tire is 29 psi, the maximum 72.5 psi. These values are displayed on the sidewall of the tire. We recommend using a pump with a pressure gauge. 

We recommend checking the pressure once a month.

Sports/

Cycling/

Bike Tools and Components/

Bike Wheel Parts & Components/

Bike Tires/

riverside

Hybrid Bike Tire CrossProtect 26" x 1.85" / 26" x 47 mm