clearance

Adjustable

Rigidity

Repair

Fitting comfort

Traction

Cushioning

Supplied by BOA® Technology, the wheels and the laces of the adjustment system have undergone thousands of hours of rigorous tests in the lab and in the field. They are guaranteed to prolong the life of the boot.


Repairing habu® Fit System knobs and cable.

Spare parts in case of a problem:
tightening wheel 
 tightening cable
Workshops in Decathlon stores have the replacement part references for this model and can repair your boot.

Repairs 

The habu® Fit System combines three important technical elements to transform the snowboard experience: 
1) the innovative wheel ensures micro-adjustment and precision 
2) the habu® cable is light but very durable, with 75 stainless steel strands
3) low-friction habu® guides ensure uniform pressure distribution while minimizing wear and increasing lifespan

habu® Fit System (produced by BOA® Technology)

The All Road 500 Snowboard Boots have 2 independent tightening zones: 1. The habu® Fit System is micro-adjustable for powerful, precise tightening of the lower part of the boot.
2. A powerful strap flattens the boot against your shin.
With this strap, the shin is not as tight and the foot is more compressed. A lower cable length prevents this from occurring.

2 separate tightening zones

The All Road 500 Snowboard Boots have medium (6/10) stiffness (or flex). They are designed for riders who hold a curve at high speed (requiring a stiff boot) and want to stay responsive through small turns or surprise bumps that require quick leg extension. The flex and heel support are both superior to the SNB 100 Snowboard Boot.

Boot flex/stiffness

The Flex Up enables you to add 2 out of 10 flexion points (with Flex Up, this boot has a rigidity of approximately 5/10).
This 100% plastic accessory can be inserted into the tongue of Decathlon snowboard boots produced from the 2022–23 season onward. A pocket has been included in the design to keep it in the ideal position.
The Flex Up adds stiffness: If your boot has lost some stiffness, give it a second life.

Increase the stiffness of your boots by adding Flex Up.

Foot support is essential for steering your board. The level 2 liner has 4 benefits:
1. Liner that can be thermoformed at home
2. Ergonomic heel pad ankle foam
3. 2-point liner tightening and strap on the tibia
4. Hook and loop link between the liner and boot.

Heel support: level 2 (/3) liner

Thermoforming is only possible in built-in ovens measuring 56 cm x 60 cm x 56 cm (22” x 23.5” x 22”) equipped with a fan mode. Do not attempt in a gas oven or small toaster oven with visible heating elements.

1. How to thermoform the liner yourself—warning!

1. Heat your oven to 80°C in convection mode. 
2. Remove the inner soles from the liners. Place the liners on a baking sheet covered with a piece of parchment paper.
3. Wait 15 minutes.
4. Put them on with a pair of ski or snowboard socks and tighten them (not too much).
5. Put on the boots on and tighten fully. 5. Wait for 15 minutes. 
This operation can be repeated if necessary.
 

1. How to thermoform the liner yourself

Ankle padding fills the hollow under and behind the ankle, keeping the heel firmly in place. The level 2 liner contains a pre-shaped foam with exclusive Wedze material: - the shape is based on the average of 40 foot scans. It holds the foot in place and adapts to every foot shape. The material is a soft but firm elastomer foam. Feel supported as soon as you put them on. When you ride, there are no hard points.

2. Ergonomic heel pad ankle foam

On this liner, we kept just 2 points of tightening with the laces:

- at the instep
  - above the ankle
There is a tightening strap at the top of the boot. This reduces lace friction (2 points instead of 3) and helps focus the tightening on heel support. The upper strap holds the liner firmly in place at the shin.

3. 2-point + strap liner tightening

A rip tab was added on the back between the liner and the boot. Our goal: The boot must hold the liner as well as the liner holds your foot. If the liner moves inside the boot, you’ll have less control over your board.

4. Hook and loop link between the liner and boot.

The insole of this boot is flat. It offers comfort and thermal insulation. If you really need added support for your foot, here’s what you can do: - get a sole with a preformed foot arch and heel or that can be thermoformed to suit your foot. This is the most effective solution.

Insole

Our Ultralight sole is 100% EVA.
EVA is a very light material with 80% air. This material resists abrasion while maintaining its damping properties. It is naturally very insulating and protects you from the cold ground.
The lug tread offers excellent grip without retaining snow.

Sole: grip, traction, cushioning, and thermal insulation

1. Put the boot on.
2. Tighten it.
3. Stand up.
4. Your big toes should touch the tip of the boot without excessive pressure.
5. Bend your legs forward; your big toes should move back, no longer touching the front of the boot.

How to choose the right size

Your product reviews helped improve the All Road 500 Snowboard Boot. 
- For the 2019–2020 season, we used a softer liner foam for increased comfort.
- For the 2020–2021 season, we moved the tightening wheel to the side so that it wouldn’t interfere with the hook and loop strap on the tibia.
- For the 2022–2023 season, we changed our wheel and cable supplier after wheel breakages.
We thank you for your comments and wish you a great time on the slopes. 

Sports/

Winter Sports/

Snowboarding Gear/

Snowboard Boots/

Men's Snowboard boots/

dreamscape

Men’s Snowboard Boots – All Road 500