Quickly and easily clean any type of chain with a single cleaner!

Compatibility

Using the chain cleaner is quick and easy, and becomes a real pleasure.

Ease of use

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Condition

Frequency

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

How to use this product: 

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

How much degreaser should you use?

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Maintenance advice: 

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

Bike Tools

clearance

Apply with a brush or with the chain cleaner

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Intensity

Disc Brake Compatibility

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

onlyonline

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Compact design

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Main Material

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Bike Racks & Stands

Robustness

We designed these 2 brushes for deep cleaning your bike.

Use the large brush in the most difficult-to-reach areas of your frame to avoid scratching, especially if you have a matte paint finish.
We recommend testing the large brush on a small area before using it on the rest of the frame.

Advice from our team

Instantly change use by simply switching to the other side of the pedal. 

Flat side: foot stability when riding for work or pleasure.

Weight

Our clipless/flat pedals are designed for riding on roads and in the city with either normal or Shimano SPD-compatible shoes.

Skill Level

Pedal Type

These pedals have a 9/16" (1.4 cm) standard thread that is compatible with all adult mountain, hybrid, city, and road bikes on the market.

Bike compatibility

To mount the pedals, you will need an 8 mm (5/16") Allen key.
Make sure you screw each pedal on the right way: clockwise for the right, and counterclockwise for the left.

Mounting

Dimensions of the flat part:
Length: 101 mm (4")
Width: 90 mm (3 1/2")

Dimensions

The holding and release tension of the SPD cleat is adjustable.

Adjustment

When learning to use clipless pedals, make sure you plan ahead each time you want to unclip and put your foot down (at traffic lights, when stopping, or when there's an obstacle in the way).
If you aren't yet completely at ease with cleats, you might want to use the flat side of your pedals on the more technical sections of your ride.

Security

These pedals are designed to last.
The CNC-milled chromoly steel spindle has been heat treated.
The high-quality oil seals ensure durability.
The double sealed bearings require little maintenance.

Product care

Axle: chromoly steel
Body: aluminum
Bearings: sealed ball bearings.

Materials

Bike Pedals & Cleats

A precise, durable, reusable spray nozzle

Use the cleaning spray on all of your bike's parts.

Versatility

This bike cleaning spray is designed for cleaning your bike without harming the paint or any parts.

This bike cleaner is designed for doing step 2. 
Remember to degrease your drive train before spraying the cleaner onto your bike (step 1). Next, spray on the cleaner, rinse it off and dry your bike (step 2) before applying your chain lube (step 3). Your bike will then be as good as new.

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

The spray nozzle used for this product is very precise, specifically designed to be used with bikes, and extremely durable. In fact, it can be used to spray on more than 50 L (44 qt.) of bike cleaner. Because of this, we've created a 1 L (1 qt.) refill that avoids you having to throw away the spray nozzle.

Danger! Cause skin irritation. Causes severe eye irritation. Keep out of reach of children.Wear protective gloves and eye / face protection. 
In case of contact with eyes: Rinse cautiously with water 
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Warnings:

100 mm diameter pressure gauge accurate to 1 PSI.

Precision

Power

The 260 mm metallic base provides excellent stability

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

Valve Type

Weight (g)

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Easy inflation

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on this pump was designed for an excellent and comfortable grip.

Ergonomic handle.

The metal base and design of this pump make extremely stable.

The 900 bike pump has been awarded a Red Dot as part of the Red Dot Design Award 2024.

Product with a design award.

Bike Pumps

Inflate up to 8 bar / 116 Psi. (hybrid/city/mountain bike/kids' tires).

Snaps onto all valves by dismantling / inverting the head

Built-in pressure gauge to inflate it to the right pressure.

We designed this foot pump so you can be prepared for all your mountain bike rides. Also suitable for hybrid, city, and kids' bike tires.

deflating mode

number of compression tubes

Tubeless compatibility (Tyre)

Sold In Set

Connects to all valve types (Presta, Schrader, Dunlop) thanks to the clip-on, universal head.

Small and large valves

1) Select the correct connector for your inner tube's valve (by inverting part of the head. See diagram in the product photos).
2) Push the pump onto the valve.
3) Use the red lever to clip the pump into place.
4) Inflate to the desired pressure.

How to use your pump

Size

11-speed chains and derailleurs: Shimano, Sram, MicroShift, and KMC

Designed for road biking and use with direct drive home trainers.

Set of Teeth

Number of Speeds

Cogs: 11-12-13-14-15-17-19-21-24-28-32.
11-28 gearing.
Weight: 375 g (13 oz.).


Teeth

Degrease, clean, and lubricate your cassette regularly for prolonged life. We recommend replacing the chain each time the cassette is replaced. Do not clean using high-pressure water jets

Care instructions

Easy assembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable or open-ended spanner.

Assembly

Easy disassembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable spanner or open-ended spanner and a chain-whip tool.

Dismantling

Bike Cassettes

Replacement chain for your 9-speed bike. Compatible with 9-speed Shimano, Campagnolo, and Sram derailleurs

Number of Links

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Number of links

Bike Chains

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Easy assembly/dismantling

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

reflective

Waterproof

Position

Attachment Type

Style

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

Anatomical chamois pad with high-density foam moulds to your body perfectly.

Sitting comfort

Wide, elastic, silicone band at the thighs.

Quickly dries thanks to the active perspiration wicking.

Moisture management

Very handy pocket on the outside of the shorts for easy access while riding.

Pockets

Designed for maximum comfort and support for bike rides lasting up to three hours at a moderate pace.

decathlon

Dry Weather Bike Chain Lubricant - 100 ml