onlyonline

Protects the blades from bumps and from the rest of your equipment.

Impact protection

Stretchy to make them easy to put on and take off. 

Easy dressing

Available in 2 sizes to fit all lengths of blades.

Adjustable

Designed for protecting your ice skate blades during transport and storage.

Condition

Practice Conditions

Skill Level

climbing shoes flexibility

When

Tightening Type

Place of Practice

Main Material

Keep your blades sharp by protecting them from impacts and rust.

Sharpness

Hockey Skates

Protect your skate blades when walking on hard surfaces. 

Compatible with adult and kids’ shoe sizes.

Ease of use

Blade covers to protect your skates off the ice.

Frequency

These blade covers are uniquely designed to protect your skate blades when walking off-ice.
We recommend using skate soakers to absorb moisture and prevent rusting when transporting and storing your skates.

Skate maintenance

25 L capacity: suitable for skate sizes W5,5/M4 to M13.

Capacity

The bottom of the bag has a waterproof coating.

Waterproof

Store your skates in two separate pockets to protect them better.

Multiple compartments

A bag for cleaning, transporting and storing your ice skates. 

Number of Pockets

Type of Cover

Foldable

Number of Compartments

Fastener Type

- Protect, dry and clean your skate blades with the accessories included
- Towel and blade guard made from absorbent fabric

Maintaining your blades

Carry your bag however you like: by the handle, over your shoulder or across your body.
The strap can be adjusted and secured with a clip.

Multiple ways to carry your skate bag

Adults' Ice Skates

The deck height and its 2 small 120 mm wheels improve maneuverability.

Manoeuvrability

Height-adjustable for kids between 1.10 m and 1.50 m tall. 

Anatomic design

Ease of braking

Ideal for honing your child's balance and motor skills, this scooter was designed for kids measuring from 1.10 m to 1.50 m (3'7" to 4'11").

Type of Wheel

Number of Wheels

Sportsperson’S Weight

Suspension

Folding Type

Wheel Size

Break Position

antitheft

With Kickstand

Weight (kg)

Check the condition of your scooter before and after each ride. Remember to look for abnormal play, cracks, and sharp edges. Wheels and bearings are subject to wear. They should be checked and replaced if necessary. To repair your scooter and extend its life, visit your local Decathlon workshop to order any spare parts you need.

How to use

As for any activity that can cause a fall, we recommend wearing protective equipment (helmet, knee pads, elbow pads).

Protective equipment

The original wheels on the MID 1 scooter are 120 mm.

However, all black Oxelo 125 mm wheels ref. no. 8579530 are compatible and recommended for use when replacing the front and rear wheels on your MID 1 scooter. 

The black light-up Oxelo 125 mm wheels ref. no. 8556617 and white Oxelo 125 mm wheels ref. no. 8560490 are only compatible for replacing the Front wheel on your MID 1 scooter.

It is important to check the wheels for wear to ensure a comfortable ride and safety.

Which wheels can you use to replace worn out wheels on your MID 1 scooter? After-sales service and light-up wheels

Kids' Scooters

clearance

The construction and adjustment dial ensure a snug fit.

Stability

Height and depth adjustable with the 3D knob. Ponytail hole.

Size S = 340 g, M = 400 g, L = 455 g.

Lightweight

Ventilation

This helmet is designed to keep you safe when in-line skating, skateboarding, or scootering.

Adjustable Helmet

Intensity

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Adjustment Dial

Style

Detachable Visor

Full-coverage model suited to skating on asphalt (neck and ear protection). Polystyrene structure and ABS outer shell. Complies with standard EN 1078.

Comfort foam. Buckle that can be fastened and released with one hand. Adjustable dividers. Use the adjustment dial to ensure a snug fit.

Parts

Three sizes: 
S = 52/55 cm, 340 g
M = 55/59 cm, 400 g
L = 59/62 cm, 455 g

Helmet sizes and weights

European standard EN 1078 defines the manufacturing and testing criteria for helmets used in sports like cycling, skateboarding, and in-line skating. The corresponding test requirements and methods cover the following aspects: construction, including field of vision; restraint systems (including chin straps and tightening devices), and manufacturer markings and information.

Certified compliant with standard EN 1078

Helmets are personal protective equipment (PPE).
Make sure that you are satisfied with the model, fit, and colour before you buy.
Helmets must be returned with the original instructions, stickers, and if possible, original packaging, in order to be resold. Together, we can protect our planet.

Return conditions (PPE)

Oxelo replacement foam kits are available to replace the foam in your helmet (Code: 8607937)

Replacement foam

Helmets are designed to protect your head from a single impact. If you fall, you should replace the helmet even if there are no signs of damage. It may be weakened or cracked in an area you can’t see, and no longer provide adequate protection.
We recommend replacing your helmet every 5 years. Some of its components begin to age at this point, especially if stored in a cold or wet place. Manufacturing dates are printed inside the helmet.

When should you replace a helmet?

Helmets

Hand = 150 g/m² insulation and palm = 80 g/m², synthetic fur lining. Cuffs.

Warmth

Waterproof membrane and water-repellent outer fabric.

Polyurethane palm and offset finger seams for extra durability.

Abrasion resistance

Comfortable and easy to put on, these warm, waterproof gloves are perfect for children aged 6 to 14 who ski regularly. 

Maximum wash temperature of 30°C. Delicate cycle.

Glove Type

reinforced palm material

abrasion 

Season

reinforced area

Reinforced Palm

Stitching Type

Windproof

anti-slip

leash

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier, making the product waterproof. 

Waterproof membrane

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Loss prevention system

Simply pull the wrist strap with the opposite hand to put them on easily and quickly.

Easy to put on

A special sleeve has been built into the gloves. This soft, comfortable cuff keeps out drafts and snow. Extra warmth.

Airtightness

Kids' & Babies' Winter Clothing

The hard plastic and foam backing absorb impacts.

Easy to adjust thanks to elastic hook and loops.

User comfort

Comfort and safety for starting skating, scootering or skateboarding.

interchangeable left right

Support Type

Protection Area

The wrist guards should be worn with the plastic shell over the palm. The R and L markings on each wrist guard can help young kids learn right from left.

How to wear the wrist guards

All kids grow at their own pace. That’s why our size guide is based on age and weight:
XXS: ages 3–7, or less than 25 kg
XS: ages 6–10, or 25–35 kg
S: ages 9–15, or less than 50 kg
Trying the product in-store can help you choose the right size.

Sizing

Please note that measurements are provided for information purposes only and do not take into account If you wear protective gear over clothing (not on your skin), you should choose the larger size.

Choosing the size of your protective gear

Your safety and comfort is our top priority. European standard EN 14120 defines the manufacturing and testing criteria for wrist, palm, knee and elbow protectors used in roller sports, and covers elements such as fit, abrasion and labelling.

What is the EN 14120 standard?

Body Protection

Polyester knit for breathability and drying.

Breathability

Regular cut and stretch fabric for freedom of movement.

Freedom of movement

Very soft, warm and comfortable ski tights. So pleasant you’ll forget you’re wearing them.

Maximum washing temperature 30°C. Normal cycle.

belt height

Weather Conditions

Reversible

Pocket

Type of Length

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

For storing inline skates or ice skates along with protective gear.

Reinforced bag base can be placed on pavement without damaging it.

Durability

This bag was designed for transporting or storing inline skates (or ice skates) and protective gear. 

Volume (L)

Ventilation Zippers

Bag Type

Volume

Castors

lockable

carrying system

For storing inline skates or ice skates along with protective gear (up to size 3.5).

Capacity:

Bag base is reinforced to withstand abrasion and ice skate blades.

Durable

Adjustable strap included for easier transport.

Adjustable strap

Kids' Inline Skates

Component encourages wicking and minimal drying.

Moisture management

This ski undergarment is designed for little skiers. It will keep them warm for a great day of skiing this winter.

Collar Type

sleeve length

anti-uv

The BL 100 Base Layer has a regular cut.
It is a classic straight cut that adapts to a wide variety of body shapes.

How does the 100 base layer top fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive and offers excellent performance in various respects, and especially because the fibres can be knitted to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.
Its ability to reduce odours is limited.

What are the benefits of polyester?

To make sure you stay warm and dry, we recommend using the “three technical layers” rule:  Layer 1: a second skin, to stay dry. Layer 2: an insulating layer that keeps the heat in. Layer 3: a protective layer that protects against the elements.

How to dress your children so they keep warm on the slopes

We commit to repairing your product free of charge for the duration of the warranty. If you need seams, zippers, or another element repaired, contact your store. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

This product is repairable

This ski base layer was developed for kids. It will keep them warm on the slopes.

The BL 100 Base Layer Bottoms have a regular fit.
The classic straight cut adapts to a wide variety of body shapes.

How do the BL 100 Base Layer Bottoms fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


Lightweight and compressible. Fits easily inside a pocket or backpack.

Compact design

This fleece neck-warmer is designed to keep your kids warm this winter.

type of lining

modular

12% elastane for excellent freedom of movement.

Stretch

These flared, stretchy, opaque leggings guarantee comfort. Feel comfy anywhere, anytime.

oxelo

Kids’ Ice Skates, IS A 100