10,000 mm (Schmerber) membrane, taped seams.

Waterproof

Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.

Warmth

Breathable fabric and ventilation strip on the back

Breathability

You can wear this versatile jacket for all of your outings whatever the weather thanks to its synthetic fibre insulation, soft collar and ventilation.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Snow Skirt

Ventilation Zippers

Condition

Skill Level

Frequency

type of lining

Season

reinforced area

Number of Pockets

Weather Conditions

sleeve length

Membrane Construction

Windproof

Pocket

RECCO system

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Type of Length

Removable Hood

Hood

Style

Zipper Type

Schmerber

Fastener Type

Main Material

The waterproof zippers, snow skirt, high collar, and adjustable hood and cuffs offer superior insulation to keep you warm.

In addition to the padding, which components provide warmth?

The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This component prevents water from seeping in while wicking away perspiration. The membrane is unbeatable when it comes to keeping you warm and dry.

What is a membrane and what does it do?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a water resistance of 8,000 mm therefore withstands the pressure exerted by 8,000 mm of water.

How is the water resistance of a jacket measured?

The 500 jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements. To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Which parts of the jacket protect me in bad weather?

Water repellency is a material’s ability to let water bead off the surface without being absorbed. This jacket features water-repellent components that improve its weather resistance. The exterior surface of the fabric is treated to make it water-repellent.

What is the water-repellent feature of my jacket for?

Bear in mind that the water-repellent feature can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray the product evenly over the entire item, then allow to dry for 10 to 12 hours.

How to reactivate your jacket’s water repellency

This jacket wicks moisture away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric.The 500 ski jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

What is a breathable jacket?

Slim fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

How does the 500 ski jacket fit?

To stay warm and dry, we recommend using the 3-layer technique: 
- Layer 1 or second skin, to stay dry. 
- Layer 2 or insulating layer, to keep the heat in.
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

The snow skirt adjusts automatically, and adjustable cuffs block drafts and snow, especially in the event of a fall.

Keeps snow out if you fall

* Close all the zippers on the jacket.
* Turn it inside out.
* Machine wash at 30°C on the delicate cycle with little detergent and no fabric softener. 
Important: Use a gentle/delicate spin cycle (less than 800 rpm). Spinning too fast may create clumps that are difficult to undo.

How should I wash my jacket?

Tumble dry (strongly recommended). 
* Gentle or delicate cycle. 
* Dry on several long cycles to dry completely. * If you do not have a dryer, it will take longer to dry (drying flat can take 1 to 2 weeks). Make sure you pat the jacket to avoid any lumps.

How to dry your jacket

This product is repairable. Solutions may be offered to you in-store. If we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

To help you choose the right size

Ski Jackets

Head size adjustment wheel. Bowl design for more stability.

Stability

12 holes to aerate and evacuate humidity.

Ventilation

ABS construction type, 520 g (1.1 lb) in size M.

Lightweight

Complies with EN1077:2007 standard (class B). ABS shell.

Impact protection

Inner hat with large mesh surface for good thermal regulation.

This robust helmet was designed for snowboarding and skiing, particularly freestyle. 

Adjustable Helmet

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Detachable Visor

The standard EN 1077:2007 category B is a European standard that applies to helmets used for cranial protection during downhill skiing or snowboarding. This standard tests the ability to absorb shocks and resist penetration.

A rigorous standard for protections

The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

A practical adjustment wheel to adapt the helmet to fit you

The venting system improves the thermal regulation of your helmet and reduces fog in your goggles. This type of design lets heat and humidity escape from the entire helmet and goggle area.

Passive ventilation system

The hard shell construction makes the helmet more durable and robust. The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. Change your snowboard helmet at least every 5 years, even if it hasn’t sustained any impacts.

Hard shell construction

Avoid putting a thick hat under your child's helmet as this will move the helmet away from their head and they won't be as well protected. 
Opt for a very thin beanie or balaclava. Helmets have good insulating properties. Often, nothing else is needed. Do not attach a camera to the helmet, as the extra weight can affect safety. The standard does not take into account any elements added to the helmet.

Safety

Make sure this product is right for you.
If not, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging. 

Product returns (specific product: personal protective equipment).

The size of the FS 300 helmet is slightly different from other Wedze helmets. It’s a bit shorter at the forehead. Check when trying them on.

Sizing

Helmets

60 g/sqm wadding, brushed polyester lining, comfort temperature down to - 4°C.

5,000 mm membrane (Schmerber) and partially taped seams.

Semi-elastic waist, belt loops, strap loops.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Elastic gaiters in the lining keep snow out.

Limits snow entering

Ready to have a go on the slopes? These warm and comfortable waterproof pants will protect you from bad weather. The gaiters go over your boots.

belt height

Type of Brushing Boots

Place of Practice

modular

Type of Bell

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of a water column in mm. The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Waist size:84 cm (33”)
Inside leg length: 86 cm (34”
Hip: 101 cm (40”)

Ski Pants & Ski Bibs

Removable ergonomic wrist strap and injected cork handle.

Ergonomic grip

Rigidity

Skating = your height x 0.89 (+/-5 cm) / classic = your height x 0.83 (+/-5 cm).

Anatomic design

For regular cross-country skiing at average intensity.

Walking Stick Type

handle length

Intensity

shape of handles

Customization

Handle Covering Material

Number of Part(s)

With Wrist Strap

Choosing the right size of cross-country ski poles is essential. 

For skate skiing, the poles are bigger to maximize push-off.
 For classic cross-country skiing, the poles are smaller.

They can be made of various materials.
Aluminum: sturdy and heavy, ideal for beginners
. Fibreglass: lighter, but more fragile
. Carbon fibre and other materials: extremely light and rigid.

How to choose your cross-country ski poles

For skate skiing, there are two ways to choose your pole size: 

1- Choose poles that are the height of your shoulders.
2 - Multiply your height in cm by 0.89 to work out the size of your poles.

How to choose the size of my skate ski poles

There are two ways to choose your pole size for classic skiing: 

1- Choose poles that are at the height of your armpits.
2 - Multiply your height in cm or inches by 0.83 to work out the size of your poles.

How to choose the size of your classic cross-country ski poles

The gauntlets are also sold separately 
Right gauntlet = 8615491
Left gauntlet = 8615492

Replacement parts

Cross-Country Ski Poles

clearance

Complies with EN1077:2007 standard (class B). Lightweight In-Mold structure.

Head size adjustment dial, full coverage.

6 holes and ventilation channels for breathability and moisture management.

410 g in size M. The lightest helmet in the range.

Ear pads and thick hat in a brushed material.

Ease of use

Warm, well-ventilated liner with full coverage.

User comfort

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing. 

Wedze/Quechua helmets and goggles are designed to form an complete unit and prevent gaps between the top of the helmet and the goggles.

Compatibility

Use the adjustment dial to secure your helmet. The dial can be easily adjusted while wearing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Tightening dial

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. The In-Mould construction is more sensitive to everyday impacts. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mold construction

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference must be adjusted using the tightening dial.
- The chin strap must be correctly adjusted. You should be able to fit two fingers between the strap and your skin. If it is not adjusted properly, the helmet will not protect you as it should.

Adjust your helmet once you have the right size

We recommend replacing your ski helmet at least every five years unless it has sustained a significant impact in the meantime. In the event of a strong impact, the helmet must be replaced: even if it is not visible, the internal material may be damaged and your helmet will provide less protection.

When should you replace your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: it is not necessary, and even discouraged, to wear a hat underneath

Helmets used for head protection when downhill skiing and snowboarding are required to meet the European standard EN 1077:2007. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. it can be refurbished. 

15,000 mm (Schmerber) membrane, taped seams.

Insulated with synthetic loose fibres, for use in temperatures as low as -9°C.

Skiing without thinking about the cold? It is possible! The synthetic fibre insulation all the difference. The bonus? The warm and comfortable collar.

We lab-test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

The resistance of a fabric is measured by the height of the water column (measured in mm) that the fabric can withstand (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A water-resistance rating of 10,000 mm means the fabric can resist 10,000 mm of water pressure.
For skiing, we advise components rated between 3,000 mm and 20,000 mm.
At Decathlon, we lab test all of our waterproof products. This product scores 3/5.

How is the water resistance measured?

The 500 ski jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements. To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Why does my jacket need water repellency?

How to reactivate water repellency

This jacket wicks perspiration away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric. The 500 ski jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

Regular fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

Regular fit

Care

The model in the photo is wearing a size L and measures 185 cm (6’1”). 
Measurements: 
Chest measurement: 104 cm (40.9 in) 
Waist measurement: 104 cm (40.9 in)
 Arm length: 45 cm (17.7 in)
Inside leg length: 80 cm (31.5 in)

wedze

Snow Goggles - G 900 C HD S1