Foam padded back and straps, ventilated fabric. Adjustable straps. Thumb loops

Carrying comfort

Everything in its place!1 large compart, 2 zippered pockets, 1 bottle holder

Multiple compartments

Compact, lightweight: 10 L, 190 g (6.7 oz). 40 x 22 x 15 cm (15.7 x 8.7 x 5.9”)

Capacity

Abrasion-resistant components and seams. 10-year warranty.

Abrasion resistance

A comfy backpack for those shorter hikes. Padded back and shoulder straps with breathable fabric, plus adjustable straps and thumb loops.

Volume (L)

Height (cm)

Condition

Depth (in cm)

Frequency

Frame

Weight (g)

Number of Pockets

carrying comfort

reflective

adjustable height

water bladder included

Waterproof

rain cover

Options

Pocket

Foldable

Type of Bell

Width

Number of Compartments

Fastener Type

Main Material

The components are designed to withstand the demands of walking outdoors. That’s why we test the durability of the materials and the resistance of the bag: nothing is left to chance. We even simulate your adventures with our hiker testers!

Choosing a durable backpack?

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zipper to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty.

This backpack has a large compartment for your essentials, two zippered pockets, one with an inner pocket for your valuables. A stretchy mesh pocket on the side also fits your water bottle or umbrella.

What is its storage capacity?

By developing your product, we have enhanced the comfort with adjustable straps and vertical foam pads on the back. The ventilated fabric on the back and straps provides better ventilation. As a bonus: Thumb loops

How comfortable is this backpack?

This backpack is water-repellent. In light rain, water will roll off without penetrating it. However, it is not completely waterproof. If the rain goes on too long or is too heavy, water will seep through. For extra protection, choose our 10–20 L rain cover (ref. 8772113).

Is this backpack waterproof?

Kids' Backpacks

EVA fabric, 100% waterproof.
Taped seams. 

Compact design

S/M (360g/13oz.) to L/XL (400g/14oz.): put it in your bag and forget about it!

Lightweight

Comes with a bag.
Size: 18 x 20 x 2 cm (7.1 x 7.9 x 0.8”)

Compatibility

This backup poncho shelters you from a light shower when hiking.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Weather Conditions

sleeve length

Windproof

Type of Length

Hood

Style

This poncho is available in 2 sizes:
157 to 173 cm (61.8 to 68.1”) in size S/M
174 to 190 cm (68.5 to 74.8”) in size L/XL
The snap opening makes this poncho easy to get on and off.

Fit and sizing information

For complete protection, we recommend wearing waterproof rain pants, such as:
NH 500 Rain Pants
on our website.

Additional product recommendations

EVA foam is not very resistant to tearing. We increased the thickness compared to the previous version and added reinforcements in high-pressure areas.

Good to know

Technologies: This garment was subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces average rain shower conditions in the mountains.

Waterproofing 

Men's Hiking Jackets

Mouthpiece with open/closed positions, wide opening for easy filling.

Ease of use

Sliding cursor to completely open the bladder and clean it easily.

Easy maintenance

2 litres (67.6 oz.), suitable for multi-day hikes.

Comfortable silicone mouthpiece at 45° angle for easy use on the move.

Mouth comfort

Designed for those who want to hydrate easily on a hike.

Volume (ml)

Cook/Drink/Eat

isothermal

Cap Type

Fill with water between -20°C and 40°C. Do not fill with alcohol or dairy, etc.
In temperatures below 0°C, blow into the mouthpiece after use to flush out the water and reduce the risk of water freezing in the tube and mouthpiece.
Remove the air from your water bladder by turning the bladder and then directing the air bubbles to the tube while suctioning them.

Directions for use

Slider to fully open bladder and facilitate cleaning.
Sliding seal has hooks so you can hang the water bladder in compatible backpacks.
The mouthpiece has an on/off position (turn the grey part of the mouthpiece) to prevent leakage during hikes. To drink, place mouthpiece in the “on” position and then suck.

Features

Clean the bladder and pipette after each use with standard dishwashing liquid. Use the Btwin brush and drying hanger kit (code: 631585), especially if you had a sugary drink. Do not leave liquid in the water bladder for longer than 24 hours. Do not put in the dishwasher or microwave.

Care instructions

Rinse the entire product 3 times with clean water before the first use.

First use

Our products and materials meet food contact standards. They are BPA-free, in accordance with regulations in force.

Materials and regulations

Vol.: 2 L (67.6 fl. oz.)
Dimensions: 18 x 37 cm (7 x 14.6”), tube 100 cm (39.4”)
Weight: 105 g (3.7 oz.)
Available in: 1 L  /  2 L  /  3 L (1 qt./2 qt./3 qt.)

Weight and dimensions

A thermoplastic polyurethane (TPU) food-safe plastic was used for this new bladder. It is 30% more resistant to perforation than the previous EVA plastic.
Improved connector design and welding quality for a more durable product.

Durability

Hydration Bags

Waterproof coating 5,000 mm (Schmerbers) | Taped seams

1 closing pocket | Light and compact | Folds away in its pocket

Easy transport

Drawstring waist | Hem tightens with a rip tab

Anatomic design

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Breathability

The fabric of the rain pants protects you from winds of up to 70 km/h (43 mph).

Lightweight, compact rain pants | Weight: 165 g (6 oz.) in size M

These waterproof rain pants are designed to protect you from light showers during occasional hikes.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

reinforced area

belt height

Precipitation

Place of Practice

modular

breathability (in RET)

maternity

Schmerber

The component isn’t the only thing that makes these pants waterproof: the assembly also makes a difference.
The overall waterproof properties of your rain pants are measured with a shower test developed by Decathlon that simulates rain of varying intensity.
The Raincut Waterproof Rain Pants protect you from small showers equivalent to 6 cm (2.4”) of rain in 1 hour.

Waterproofing

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm (8”), twice
- with an iron on the delicate setting and with the steam function off

Performance in the rain

The fabric is breathable: RET = 12.
Component breathability is measured by thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric.   
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability

Fabric breathability

This product is designed for hikes lasting several hours while walking at a pace of no more than 5 km/h (3 mph).
How much you perspire depends on the intensity and duration of your activity.If the fabric isn’t breathable enough for the type of exercise, your perspiration will condense inside the item.The jacket will feel damp inside.This dampness is not rain soaking through the shell but condensation caused by perspiration.This means you need to choose rain pants suitable for your activity.

Choosing waterproof rain pants based on physical effort

Women's Hiking Pants

1 main compartment with a double zipper | 1 deep outer compartment

Pockets

Vol: 10 L
Weight: 145 g (5.1 oz)
Dimensions: 39 x 21 x 12 cm (15.4 x 8.3 x 4.7”)

Durable, abrasion-resistant components and assemblies | 10-year warranty

Ventilation

Easy access to the outside pocket by putting the bag horizontally when hiking

Designed for occasional hikes on easy trails. 

The volume of each backpack is measured using a standardized method: the main compartment and all the pockets are filled with little balls. These balls are then emptied into a graduated container to get the equivalent volume in litres.

How is volume measured?

1 - Loosen all the straps (straps, belt, and load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

How to adjust your backpack

Put heavy items at the bottom. Pack your clothes around these items. Keep your waterproof jacket and/or fleece in an easy-to-access location. Place small frequently used items in the pockets (sunscreen, map, glasses, etc.). 

How to pack your backpack

The water-repellent components allow you to continue walking or hiking in light rain for short periods. Note: This backpack is not watertight or waterproof and does not come with a rain cover. 
To keep your belongings dry on longer walks or hikes, we recommend the following product: 10 L to 20 L Hiking Backpack Rain Cover (reference 8772113), which can be found on our website.

Water repellency

The following components were validated in the lab: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness, and waterproofing. We also check the resistance of the construction using a dummy that reproduces a hiker’s movements to replicate several years of wear and tear.

Tested for optimal durability

Thanks to your feedback, we have improved the design and concept of the NH100 10-litre backpack.
We added a double zipper on the main compartment and a larger pocket bottom on the outside pocket. The aim is to not lose your belongings when opening your bag. 

Your opinion is important to us!

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zip to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty

Padded waistband, wide adjustable straps. Thumb loops

Well-ventilated back (AirCooling) that regulates perspiration.

20 L/Dimensions: 48 cm x 23 cm x
 17.5 cm (19” x 9” x 6.9”)

Volume

1 outside pocket, 1 inside, 2 mesh side pockets, 1 belt pocket, 1 water compartment

Content protection

Large front opening for easy access to the interior

Easy opening/closing

The MH 100 Hiking Backpack is designed for occasional hikes. Padded belt and ventilated back for added comfort.

Our products are perfect for your mountain hikes. 
Over time, they will age, and some parts can wear or break.
To make repairs easier, we sell tightening buckles and chest clips that are compatible with your bag. Don’t throw away, repair!

Repairs

There is a compartment in the bag to place a water bladder as well as a hole for the tube.
The water bladder is not included, but you can buy a 1-litre (1 qt.), 2-litre (2 qt.), or 3-litre (3 qt.) one in stores.

Water bladder

1 - Loosen all the straps (shoulder straps, belt, load adjuster straps). 
2 - Put the backpack on. 
3 - Put the belt around the waist, and tighten it. 
4 - Tighten the shoulder straps. 
5 - Adjust the load adjuster straps as needed.

We recommend handwashing your backpack. Use soapy, lukewarm water and focus on the areas in contact with the body (shoulder straps, back, and belt), using a brush if needed.
This is the best way to maintain the fabric’s properties, particularly the waterproofing.
Rinse well with lukewarm water and dry away from heat and sunlight. Store in a dry place.

How do I care for my softshell jacket?

Laptop Backpacks

The pockets, nets, and compartments help you organize your belongings.

This toiletry bag was designed to store and protect your belongings, and save space

Type of Cover

Weight

Unfolded: 18 x 26 x 1 cm
Folded: 18 x 8 x 3 cm

Dimensions

Travel Accessories

Zipper at the bottom of the legs makes them easier to put on with shoes.

Easy dressing

Hydrophilic coating (RET = 12): reduces condensation in the garment.

Lightweight, compact top-layer pants | Weight: 200 g (7 oz.) in size L 

Designed for occasional hikes on easy trails in rainy conditions.  

Customization

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water pressure (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

Water resistance (fabric)

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
RET < 9: extremely breathable fabric
RET < 12: very breathable fabric
RET < 20: breathable fabric
RET > 20: little or non-breathable fabric.

The fabric for this jacket is water-repellent: water slides off its surface. In this way, the fabric doesn’t soak up water and stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free. As a result, this model will be sold with a more environmentally friendly water-repellent treatment.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain waterproofing over time

How much you perspire depends on the intensity and duration of your physical activity.If the fabric isn’t breathable enough for the type of activity/exercise, your perspiration will condense inside the item.The jacket will feel damp inside. This dampness is not rain soaking through but condensation caused by perspiration. This means you need to choose top-layer pants suitable for your activity.This product is designed for 2-hour hikes at no more than 5 km/h (3 mph).

For full-body protection from the wind and rain, we recommend the Raincut 1/2 zipper or full zipper men’s jackets.   

Other recommended products

Men's Hiking Pants

Warmth

Polyamide fabric reinforcement reduces abrasion and increases heel stability.

Terry knit under foot  for a more comfortable fit

User comfort

Asymmetrical fit (left and right socks) for improved alignment.

Knit stitch reduces blisters at the metatarsals and heel.

Reduced chafing

Designed for hiking in cold weather. These socks offer maximum comfort and warmth with the inside of the foot knit in merino wool.

Season

height of the sock

thickness of the sock

reduced chafing

Sock Height

Type of Socks

shoes with left or right mark

Packaging

Wool fibres can store a lot of air and let water vapour escape, making wool an excellent choice for moisture management and thermal regulation. Wool’s ability to store and release moisture make it an insulating, comfortable material for hiking socks.

quechua

Hiking Backpack Rain Cover 10-20 L green