clearance

Complies with EN1077:2007 standard (class B). Lightweight In-Mold structure.

Impact protection

Head size adjustment dial, full coverage.

Stability

6 holes and ventilation channels for breathability and moisture management.

Ventilation

410 g in size M. The lightest helmet in the range.

Lightweight

Ear pads and thick hat in a brushed material.

Warmth

Ease of use

Warm, well-ventilated liner with full coverage.

User comfort

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing. 

Adjustable Helmet

Ventilation Zippers

Condition

Intensity

Frequency

Weight (g)

Season

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Style

Detachable Visor

Fastener Type

Wedze/Quechua helmets and goggles are designed to form an complete unit and prevent gaps between the top of the helmet and the goggles.

Compatibility

Use the adjustment dial to secure your helmet. The dial can be easily adjusted while wearing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Tightening dial

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. The In-Mould construction is more sensitive to everyday impacts. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mold construction

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference must be adjusted using the tightening dial.
- The chin strap must be correctly adjusted. You should be able to fit two fingers between the strap and your skin. If it is not adjusted properly, the helmet will not protect you as it should.

Adjust your helmet once you have the right size

We recommend replacing your ski helmet at least every five years unless it has sustained a significant impact in the meantime. In the event of a strong impact, the helmet must be replaced: even if it is not visible, the internal material may be damaged and your helmet will provide less protection.

When should you replace your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: it is not necessary, and even discouraged, to wear a hat underneath

Helmets used for head protection when downhill skiing and snowboarding are required to meet the European standard EN 1077:2007. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. it can be refurbished. 

Product returns (specific product: personal protective equipment).

Helmets

Simple shoulder strap. Adjusts to the size of your skis.

Easy transport

Resistant material for protecting and storing skis.

A half zipper on the longer side for easy access to skis and poles.

Easy opening/closing

With this useful bag, you can store and protect your skis (< 192 cm) and poles.

Waterproof

Number of Pockets

Type of Cover

Number of Skis/Snowboards

Foldable

Number of Compartments

197 cm unfolded, to accommodate skis up to 192 cm.

Sizes

Ski Bags

60 g/sqm wadding, brushed polyester lining, comfort temperature down to - 4°C.

5,000 mm membrane (Schmerber) and partially taped seams.

Semi-elastic waist, belt loops, strap loops.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Elastic gaiters in the lining keep snow out.

Limits snow entering

Ready to have a go on the slopes? These warm and comfortable waterproof pants will protect you from bad weather. The gaiters go over your boots.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

type of lining

reinforced area

belt height

Type of Brushing Boots

Weather Conditions

Place of Practice

modular

Windproof

Pocket

type of waterproofing

Type of Length

Type of Bell

Schmerber

Main Material

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of a water column in mm. The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Waist size:84 cm (33”)
Inside leg length: 86 cm (34”
Hip: 101 cm (40”)

To help you choose the right size

Ski Pants & Ski Bibs

Good foot support at high speed on-piste and off-piste.

Cushioning

Classic binding with turn strap: The strap opens up to 180° so it doesn’t get in the way.

Fast acting

M = 22.5 cm to 26 cm
G = 26.5 cm to 30 cm

Anatomic design

Conventional fastener: pump to achieve the required support. No limit.

Pair of bindings, 2 discs, 8 screws compatible with discs, and 8 washers

Capacity

For boards with normal inserts or Burton Channel (not Burton 3D-compatible).

This traditional snowboard binding allows you to discover snowboarding and improve, on-piste and off-piste.

Skill Level

Attachment Type

ref. number 8576631: 2 front strap screws and 2 rear strap screws 
ref. number 8576570: 4 strap attachments 
ref. number 8576632: 1 pair of toe straps size M
ref. number 8576633: 1 pair of toe straps size L 
ref. number 8576569: 4 ankle strap attachments 
ref. number 8576639: 1 pair of ankle straps size M
ref. number 8576638: 1 pair of ankle straps size L
ref. number 8576658: 1 disc and 4 screws (16 mm)
ref. number 8576630: 2 highback screws

After-sales parts list

The SNB 100 Snowboard Binding is a traditional binding, designed for discovering snowboarding and supporting your progress on groomed slopes and off-piste.
It offers all the basic functions of a good snowboard binding (comfort, support, and rigidity to steer the board), but without additional options, to make it as affordable as possible. There is no adjustment of the angle of the highback, and you will need to use a screwdriver on the strap screws.

Program/terrain

The SNB 100 Binding allows you to easily centre your feet on the board:
- 3 positions for screws on the disc: 18 mm (0.7”) of adjustment between minimum and maximum
 - Adjustment of the highback from front to rear: +12 mm (0.5”) of additional adjustment
The aim is for the boot to hang over the board as much at the toe as the heel.
The straps can then be adjusted to the boot with the pre-drilled positions on the straps.

Adjustment options

Turn strap system: The strap is mounted onto a hinge that turns it inward when you lift your foot.
When putting the boot on, there is space to insert the boot into the binding without any discomfort. This also prevents the strap and the hooks from getting crushed with the boot.

Opening mechanism

The stance is the distance between the bindings in cm. It can be adapted according to your body shape, but all snowboards have a recommended stance for bindings (shown by a mark between the binding inserts). If you want to position your feet further apart or closer together on the board, test it to see if the stance is suitable for you.

Stance, binding spacing

For piste/off-piste boards:
To keep feet closer together, move the binding forward only.
To move feet farther apart, move the binding backward. The idea is to get a little further back to improve piste performance on bends and float on powder snow. 
For freestyle boards (symmetrical): 
best to keep both bindings centred on the board.

How do I change my stance on the board?

For a freeride run, +18° at the front and 0° at the rear is recommended. For a versatile freestyle run, try +18° and -6°. The back foot opening lets you change when riding switch. 
For pure freestyle runs, choose completely symmetrical angles such as +15° and -15°, for example.
Angle choice on bindings is a very personal thing. Don’t be afraid to check out what others are doing and try out different options. You might be pleasantly surprised!

How should I angle my snowboard bindings?

Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to centre the boot on the snowboard and prevent the foot from protruding over the edge of the board to avoid falling. Make sure that your boot goes over the 2 sides of the board equally. You can also rotate the disc by 90°. In this case, the bindings cannot be centred laterally.

Remember to centre your boot on your board!

M = 22.5 cm to 26 cm
G = 26.5 cm to 30 cm

We strongly recommend trying on the bindings with your snowboard boots, as a particular size of boot can vary in volume depending on the brand.

What size should I choose for my snowboard bindings?

The Burton snowboard brand has its own system for mounting bindings, the Channel. The binding is screwed on 2 movable inserts.
Our disc makes it possible to mount this bracket on the channel.
However, the screws that come with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You will need to buy Burton screws.

Compatibility with Burton Channel boards

Snowboard Bindings

Shoulder strap comes with an ergonomic pad for comfort and stability.

Separate, padded helmet compartment for impact resistance.

Wide mesh insert at the top for air flow.

Developed for skiers/snowboarders seeking a bag to protect their boots and to transport them easily over short distances. 

impact protection

Use the main compartment for your ski or snowboard boots.
The secondary compartment holds a ski helmet, gloves, and goggles.

Compartments

A handle to carry your bag when travelling short distances.
A foam padded, adjustable shoulder strap for carrying the bag over the shoulder more comfortably.

Transport

When the pocket is fully open, it can be used as an insulating mat for putting your ski or snowboard boots on in the parking lot.

Floor mat

A wide mesh at the top that allows air to flow inside in order to speed up drying and provide ventilation for the entire bag.
However, we recommend that you take your boots out at the end of the day so that they can dry fully in the open air.

We use high-density 600D polyester canvas for the exterior of the case. The component has been extensively tested to check the resistance and guarantee the long life of the product.The inside of the bag is made of a polyethylene liner that provides superior resistance to abrasion and cuts.

Durability

Once empty, you can fold down the case so that it takes up as little space as possible.

Compact design

This bag has an insert on the shoulder strap for writing your personal information, to prevent you from losing it or confusing it with someone else's.
You can add:
your last name, first name, phone number, home address, and email address.

Customization

Head size adjustment wheel. Bowl design for more stability.

12 holes to aerate and evacuate humidity.

ABS construction type, 520 g (1.1 lb) in size M.

Complies with EN1077:2007 standard (class B). ABS shell.

Inner hat with large mesh surface for good thermal regulation.

This robust helmet was designed for snowboarding and skiing, particularly freestyle. 

The standard EN 1077:2007 category B is a European standard that applies to helmets used for cranial protection during downhill skiing or snowboarding. This standard tests the ability to absorb shocks and resist penetration.

A rigorous standard for protections

The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

A practical adjustment wheel to adapt the helmet to fit you

The venting system improves the thermal regulation of your helmet and reduces fog in your goggles. This type of design lets heat and humidity escape from the entire helmet and goggle area.

Passive ventilation system

The hard shell construction makes the helmet more durable and robust. The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. Change your snowboard helmet at least every 5 years, even if it hasn’t sustained any impacts.

Hard shell construction

Avoid putting a thick hat under your child's helmet as this will move the helmet away from their head and they won't be as well protected. 
Opt for a very thin beanie or balaclava. Helmets have good insulating properties. Often, nothing else is needed. Do not attach a camera to the helmet, as the extra weight can affect safety. The standard does not take into account any elements added to the helmet.

Safety

Make sure this product is right for you.
If not, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging. 

The size of the FS 300 helmet is slightly different from other Wedze helmets. It’s a bit shorter at the forehead. Check when trying them on.

Sizing

Use the dial at the back of the helmet to adjust the fit.

6 holes for aeration and wicking away moisture.

Complies with the EN 1077:2007 standard (cat. B) ABS structure for superior strength

Thin earpieces and comfortable foam padding.

Removable comfort foam inserts are machine-washable at 30°C.

Easy maintenance

Developed for occasional skiers looking for a simple helmet to safely negotiate their first ski turns.

The H 100 Downhill Ski Helmet is the most affordably priced model in the Wedze ski helmet range.
For safe skiing by beginners and occasional skiers. This helmet complies with the same standards as the others. However, its comfort and finish are more average compared to the other models. It does not have the same level of quality as a more expensive helmet.

Experience

Wedze helmets and goggles are designed to be worn together.

Use the adjustment dial to keep your helmet secure. Easy to reach even with gloves on, use the dial to make simple and precise adjustments any time. Adjust for comfort and maximum safety. Turn the dial right to tighten and left to loosen.

Adjustment dial

The helmet is injection moulded, with an ABS outer shell capable of withstanding powerful impacts. Durable and resistant to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. We recommend that you change your ski helmet at least every 5 years or following a significant impact.

ABS construction

EN 1077 is a European standard that applies to downhill skiing and snowboarding protective helmets. This standard tests the helmet’s ability to absorb shocks and resist perforation. The 2 classes are:
- Class A: protects the ears and the top, back and sides of the head
.- Class B: Protects the top and back of the head but does not cover the ears.

wedze

Women’s Downhill Skis & Bindings - Cross 150+ Floral