onlyonline

Seam resistance is greater than a webbing knot.

Abrasion resistance

Breaking resistance

Available in 3 lengths (60, 120, & 175 cm [24/47/69"]) depending on your needs.

Ease of use

Tubular ring for multiple uses in mountaineering, climbing, and all vertical sports.

Condition

Diameter

Skill Level

Rope Length (cm)

Adjustable Length

Style

Hook Type

Elastic

Length (cm)

Product certified in line with the EN566:2017 standard

Standards

Gear

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

Durability

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Versatility

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Number of Carabiners

Main Material

Bags & Ropes

Features teeth on the side for easy setup on the rope

For an 8.9 mm (1/3") by 11 mm (2/5") single rope or a 7.5 mm (1/4") by 9 mm (1/3") half rope.

Compact design

Lightweight

Single belaying/abseiling system, intended for indoor climbing or rock climbing activities.

type of belayer and descender

Type of Climbing Rope

Weight (g)

belaying a second climber

This belay has 2 V-shaped brake grooves to slow the climber's descent.

Braking principle

If the system is dirty, clean it with fresh water and dry it away from heat sources. Do not use chemical products.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the system in a dry, cool, and ventilated place, away from UV rays and chemicals.
 For more details, refer to the instructions for use.

Storage and transport

Product in line with the standard EN 15151 -2 2012 and UIAA 129

Certification

Can hold a maximum of 600 kg without breaking.

Ideal for securing accessories when climbing or mountaineering.

5 mm diameter low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Floatability

Rope Length (m)

Diameter:

Static strength:

Weight:

- Please note that this cord is static
- It should only be used as a backup for climbing, mountaineering, caving, or working at height.
- It will not absorb energy.
- It should not be used as a belay rope.

Restrictions of use:

Standards/certification

Chlorine resistance

Highly resistant to repeated folding and high levels of friction.

Elastic cordelette to really bite into narrow ropes.

Compatibility

Impact protection

Extremely lightweight—30 g compared to mechanical systems.

Weight

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

UIAA Dry  hydrophobic treatment core and sheath. PFC free.

Waterproof

At 39 g per metre (1 1/3 oz. per yard), you won’t even feel it in your backpack.

This thin rope is smooth, light and compact.

Ergonomic grip

Absorbs fall force well with 7 kN impact force rating.

Stretch

Meets two standards: Half rope and twin rope.

Compact and lightweight, this dry core rope is perfect for easy alpine snow climbs, glacier trekking, ski touring, or setting up a handrail.

Weather Protection Type

The sheath and core have a water-repellent finish so the rope stays dry.
Less than 2% water retention.
The mechanical features help the rope last longer in cold and wet conditions.

UIAA Dry treatment:

Special treatment makes the rope smoother.

Plasma fluid treatment:

39 g/m (1 1/3 oz./yd)

Please note: Rope weights are set according to the EN 892 standard.
For example, a single rope must hold 10 kg (22 lbs) for 1 minute under specific temperature and humidity conditions.
This determines the rope’s actual weight, which is often superior to the weight given by the standard. 
The weight according to the standard is used to compare two ropes.

Number of falls: 6/12
Impact force: 7/10.6 kN
Dynamic elongation: 28.5%/27.6%
Static elongation: 8.7% / 4.6%
Sheath slide: 0
Number of spindles: 32

Number of falls: 

It’s important to properly care for your rope to reduce wear.
We recommend the following:
1- Use a rope cover.
2- Wash off dirt under lukewarm water. 
Should stains persist and you want to wash the rope with soap, it is important to use a pH-neutral soap (such as Marseille or household soap) and then rinse thoroughly with clean water.
3- Air-dry away from sunlight and heat sources.

Washing the rope:

Store in a cool, dry place away from direct light and corrosive agents. Never leave your rope in a car on a hot summer day.

Storing the rope:

It’s important to check your rope regularly. Run it through your hands and inspect it metre by metre. This will allow you to spot any nicks, cuts, or weak spots. If you notice any abnormalities, if the core is visible, if the rope is deformed or if the rope has exceeded its fall rating, it must be replaced.  Take safety seriously!

Inspecting the rope:

Stds/Certif.

1 adjustable carry strap for easy transport. 
2 compression straps. 

Easy transport

No need to refold your rope after each session thanks to these 2 straps.

Heavy-duty cover (600D polyester) protects rope from the ground.

Flexibility

Designed to hold up to 100 m (110 yd) of rope.

Capacity

This bag is designed to hold and protect climbing ropes for indoor or big wall climbing.

Number of Pockets

Type of Cover

Foldable

carrying system

Number of Compartments

Fastener Type

Keylock shape and flat tint on the carabiner for easier handling.

Easy opening/closing

This versatile quickdraw is designed for climbing.

Height (cm)

Pack

major axis resistance (in kN)

Carabiner Shape

Type of Snap Hook

Width

New patented system for gate opening/closing. A plastic runner which slides over the carabiner body holds the spring, located inside the gate, in place. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Carabiner:
Major axis:  22 kN
Minor axis:8 kN
Open gate: 7 kN

Strap
Length: 11 cm (4 1/3")
Width: 16 mm (3/5”)

Technical features

Quickdraws should be cleaned with fresh water and dried away from a source of heat. Do not use chemicals.
For more details, refer to the instructions for use.

Store the quickdraw in a dry, cool, and ventilated place, away from UV light and chemicals.
For more details, refer to the instructions for use.

Guidelines for use

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018
The straps are certified EN 566: 2017

Absorption

absorbing sweat from the CLIMBER'S hands.

type de craie

Can hold a maximum of 250 kg without breaking.

A lightweight, low-stretch cord designed to be used as a backup for climbing, mountaineering, caving, or working at height.

Ventilation

ABS shell construction protects helmet from everyday scratches

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Detachable Visor

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Helmets

Pack of 5 versatile quickdraws (Klimb 11 cm) for climbing and mountaineering.

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Can hold a maximum of 900 kg without breaking.

Softness

Its regular fit means you can move without feeling restricted

Freedom of movement

Lightweight yet strong PET fibres extend its lifespan

The cotton/polyester blend allows perspiration to dry quickly

Quick drying

This men’s climbing T-shirt gives you great freedom of movement on the rock face. Combining comfort and style.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Maximum washing temperature 30°C. Normal cycle.

anti-uv

Collar Type

Pocket

sleeve length

Clothing

Durable fabric inserts. Ultra-durable Coats thread.

Stretch fabric on the seat, knees, and lower legs.

Synthetic fabric for quick-drying properties.

Reinforced, water-repellent front and rear zones.

Water repellent

Light, breathable fabric in low-friction areas.

Breathability

5 secure pockets including 4 with a zipper and 1 with a flap and snaps.

Pockets

These pants weigh about 380 g (13.4 oz.) in size XL.

These hard-wearing pants have reinforced inserts and solid seams, making them ideal for hiking in comfort, or even just chilling at home.

Frequency

reinforced area

belt height

Weather Conditions

Place of Practice

modular

Windproof

Type of Length

Type of Bell

These pants are designed with 3 different fabrics:
- a durable fabric (198 g/m²) on the areas that need protection from abrasion (seat, bottom of the leg at the front). This fabric is also stretchy, so you can move freely.
- a light, breathable fabric (145 g/m²) on the rest of the pants.
- a very stretchy crotch gusset.

Why choose a hybrid construction for the MT 500 Hiking Pants?

The MT 500 Hiking Pants have: 
- 2 zipped hand pockets
- 1 zipped right thigh pocket and 1 interior phone compartment
- 1 left thigh pocket with flap
- 1 zipped back pocket

The pants are stretchy at the bottom so you can adjust them to fit perfectly over your shoes.

The pants come with a belt.

What accessories are available for the MT 500 Hiking Pants?

These pants have water-repellent inserts (front of leg, seat) so water slides off the fabric’s surface. This product is water-repellent, not waterproof.

The water repellency prevents the pants from getting wet too quickly. However, this won’t be enough to keep you dry if you’re in steady rain. For intense rain, you will need a pair of rain pants like the MT 500 Hiking Pants (ref. 8736465).

Water repellency can be reactivated using a water-repellent spray (ref. 8800346).

simond

Screwgate Carabiner, 3000