Easy maintenance

Perfect for storing your helmet (including a large visor helmet).

Compatibility

This ski helmet cover is the ideal protection for your helmet when being transported and stored.

Condition

Skill Level

Frequency

Weight (g)

Number of Pockets

Type of Cover

Waterproof

Foldable

Number of Compartments

Fastener Type

Ski Bags

lowest

Bad weather visor (S1) -100% anti-UV - anti-fog treatment.

Sun protection

Only compatible with the PST 550/950 ski helmet.

Easy assembly/dismantling

This bad weather visor (S1) is compatible with the PST 550 and PST 950 MIPS helmets.

Weather Conditions

Style

Main Material

This bad weather visor (S1) is compatible with the PST 550 and PST 950 MIPS helmets.A bad weather visor has a lighter tint allowing better vision in bad weather.

Experience

Only with Wedze PST 550 and PST 950 MIPS helmets.

Select the visor size equivalent to the size of your helmet. E.g. If your helmet is in size M then select a visor in size M.

Which size?

Sun Protection

Shoulder strap comes with an ergonomic pad for comfort and stability.

Easy transport

Separate, padded helmet compartment for impact resistance.

Impact protection

Easy opening/closing

Wide mesh insert at the top for air flow.

Ventilation

Developed for skiers/snowboarders seeking a bag to protect their boots and to transport them easily over short distances. 

impact protection

Number of Skis/Snowboards

Use the main compartment for your ski or snowboard boots.
The secondary compartment holds a ski helmet, gloves, and goggles.

Compartments

A handle to carry your bag when travelling short distances.
A foam padded, adjustable shoulder strap for carrying the bag over the shoulder more comfortably.

Transport

When the pocket is fully open, it can be used as an insulating mat for putting your ski or snowboard boots on in the parking lot.

Floor mat

A wide mesh at the top that allows air to flow inside in order to speed up drying and provide ventilation for the entire bag.
However, we recommend that you take your boots out at the end of the day so that they can dry fully in the open air.

We use high-density 600D polyester canvas for the exterior of the case. The component has been extensively tested to check the resistance and guarantee the long life of the product.The inside of the bag is made of a polyethylene liner that provides superior resistance to abrasion and cuts.

Durability

Once empty, you can fold down the case so that it takes up as little space as possible.

Compact design

This bag has an insert on the shoulder strap for writing your personal information, to prevent you from losing it or confusing it with someone else's.
You can add:
your last name, first name, phone number, home address, and email address.

Customization

The straps keep your skis together as you carry them

A foam protector separates the edges and reduces the risk of damage

Use these straps to carry your skis and prevent their edges from rubbing together.

Suitcases & Luggages

This one-size pouch can be used to protect all ski goggles.

Wide opening makes it easy to store or remove your goggles.

The lens of your ski mask is never fully scratch resistant, but this case will provide proper protection.

With Protection

reflective

Protect your goggles and lens from scratches by using the microfibre Wedze pouch before and after use. The material is perfect for keeping your ski goggles scratch-free. This pouch also cleans your lens!

Microfibre case

Kids' Ski & Snowboard Goggles

Body mapping reinforced in heavy sweating areas

Moisture management

I-Soft technology: brushed finish for softness and warmth

Warmth

Freedom of movement

Seamless construction to reduce seams, and therefore chafing

Reduced chafing

These technical, thermal ski tights have been specially designed for young winter sports enthusiasts aged 5 to 15 years. 

Maximum wash temperature of 30°C. Delicate cycle.

Pocket

belt height

Type of Length

Reversible

These slim-fit, close-fitting tights stop under the calf to avoid any ankle bulk, while being highly versatile for all activities.

Special feature of the BL 900 ski tights

This garment is fully designed in Europe, from the manufacture of its thread and its production in Italy, to its tailoring and assembly in Albania.

100% European production

Kids' Ski Clothing

100 g/m² insulation. Fleece lining at the seat + Warmseat = 54% more warmth.

Waterproof coating 10,000 mm water (Schmerber). Fully taped seams.

Patented PNF system: adjustable leg length up to 12 cm.

Adjustable

Knee pads: removable foam for comfort when kneeling in the snow.

User comfort

The bib keeps the snow out at the back. Lower leg gaiters

Limits snow entering

3 pockets, including a secure chest pocket (perfect for cereal bars).

Pockets

Made for ski and snowboarding, these bib pants feature a removable foam padding at the knees and fleece lining on the buttocks.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

pattern

Season

reinforced area

Type of Brushing Boots

Place of Practice

modular

Stitching Type

Windproof

RECCO system

Type of Bell

Schmerber

With Straps

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

Practical info: How can I stop snow from getting into my bib pants?

To make sure you stay warm and dry, we recommend using the 3-layer rule:
- Layer 1, a base layer to keep you dry. 
- Layer 2, an insulating layer to keep you warm. 
- Layer 3, a protective layer against the elements.

How to dress your children so they stay warm on the slopes

The resistance of a fabric is measured by the height of the water column (measured in mm) that the fabric can withstand (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. The fabric of the Salopettes 500 has a waterproof rating of 10,000 mm, meaning it is able to withstand the pressure of 10,000 mm of water.
For skiing, we recommend fabrics with resistance between 3,000 mm and 10,000 mm.

How is fabric waterproofing measured?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. Turn the product inside out. Use a small amount of detergent. Do not use fabric softener.
*Spin between 800 and 1,200 rpm.
*Dry flat or tumble dry.
Do not dry clean. Do not place on a radiator or heat source.

How do I wash my bib pants?

Polyester knit for breathability and drying.

Breathability

Regular cut and stretch fabric for freedom of movement.

Very soft, warm and comfortable base layer. So pleasant you’ll forget you’re wearing it.

Intensity

Collar Type

sleeve length

anti-uv

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

Stability

Lightweight

Do not wash.

Do not dry clean.

Do not iron.

Do not tumble dry.

Bleaching excluded.

The PST 950 MIPS provides maximum field of vision for greater comfort and increased safety by limiting blind spots. The new rotation system means you do not feel any discomfort if you wear glasses underneath and has the advantage of fitting more snugly to the face, therefore reducing the amount of air that can get in.

The visor provided is a “fair-weather” one (S3). Its HD optical quality increases contrast and allows for better visibility of the terrain. It can be removed without tools and replaced with a “bad weather” visor, sold separately. Never wipe it, but rather pat it with a soft cloth.

An HD visor for excellent vision, with anti-fog treatment

In addition to being suitable for wearing over glasses while skiing, the visor widens the field of vision by 25% horizontally and 7% vertically. This allows you to anticipate better and not miss a thing, for more fun and safety!

The visor offers an advantage for those who wear glasses: it really widens your field of vision.

The low-friction layer (yellow layer under the helmet shell) allows multi-directional movement of 10 to 15 mm during certain angled impacts, aiming to reduce the rotational force transmitted to the head and brain.

MIPS® technology reduces the rotational energy of an impact and thereby reduce the risk of brain damage.

The adjustment dial plays a key role in keeping your helmet secure. It allows for easy and precise adjustment, thanks to a dial that can be accessed even with ski gloves on, providing comfort and safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment wheel

The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. It’s resistant to bumps and strikes. The internal Epos skullcap absorbs impact during collisions. We recommend changing your ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.

EN 1077 standard

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference should be adjusted using the thumb wheel.
- The chinstrap must be properly adjusted. You should be able to fit two fingers between the strap and your skin. If your helmet is poorly fitted, you will have less protection.

Adjust your helmet once you have the right size

We recommend changing your ski helmet every 5 years, unless it has sustained a significant impact in the meantime. In case of severe impact, you need to change the helmet: even if you can’t see it, the inner material may be damaged and your helmet will offer less protection.

When to change your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: you don’t need to wear a hat underneath – in fact, it’s best not to

It is characterized by its shock absorption capacity and penetration resistance. There are two categories of protection:
- Class A: the top and back of the head, as well as the ears and sides of the head.
- Class B: the top and back of the head, but not the ears.

This helmet is governed by European standard EN 1077:2007, applicable to helmets used in downhill skiing or snowboarding

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging.

Sports/

Sport Accessories/

Safety & Protection/

Safety/

Helmets/

wedze

Ski Helmet with Visor, PST 950 MIPS