15 000 mm waterproof component, waterproof zippers, 100% sealed seams.

Waterproof

60 g/m² insulation, comfort temperature rating of -4°C.

Warmth

The RET < 12 and large ventilation zippers make the pants very breathable.

Breathability

The pants have loops for attaching braces or a belt.

Anatomic design

These pants are designed for regular skiers who love downhill skiing and are looking for a single pair for the whole season. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Pocket

Type of Length

Type of Bell

Main Material

- 2 hand pockets
- Snow gaiters
- Adjustable belt
- 2 large ventilation zippers
- Braces loops
- Belt loops

A practical and comprehensive set of accessories for all your outings

The waterproof component and the assembly prevent water from getting in. The seams are waterproof, and the zippers are also waterproof and under a protective flap. This jacket has been tested in a special shower that reproduces the conditions of the ski resorts, and in the field for several days in different weather conditions.

Highly waterproof (15,000 mm Schmerber) and tested in real-life conditions

A fabric's water-repellent property is its ability to let water slide off its surface without soaking in. The fabric doesn’t soak up water and so remains lightweight, breathable and warm. It is made from a treatment on the outside of the fabric, which must be renewed (every 3 washes).

Water-repellent pants

The pants are padded with 60 g/m² insulation: just enough to keep you warm without being too thick.

Warm without compromising on breathability

The RET, or the evaporative resistance of the material (ISO 11092 standard), is 12. The lower this rating, the more water vapour generated by the body evaporates.
 
RET < 9 = extremely breathable   
9 < RET < 12 = very breathable 
12 < RET < 20 = breathable
RET > 20 = little or no breathability.

Breathable fabric and ventilation

This is a very thin polyurethane film that makes the material waterproof while remaining breathable. More flexible, lightweight, resistant and often more breathable than coating, which is less expensive and requires a protective lining, similar to paint applied to the inside of the fabric.

Made with a membrane component

Beyond the warranty period (2 years), your product will still be repairable (seams, zippers, etc.). Solutions can be offered at your nearest store.

Repairable

Weight

You don't need to wear anything under these padded pants. However, in very cold weather, you can wear a breathable thermal base layer (known as a layer 1).

What to wear under ski pants

The water repellency of your pants should be reactivated regularly (every 3 washes): over time, even though they remain waterproof thanks to the component, they seem to start absorbing water. To do this, use a reactivating spray or a treatment reapplication product.

How to reactivate water repellency

Ski Pants & Bibs

Low: component provides moisture wicking with minimal drying.

Moisture management

Average: brushed lining for warmth. 180 g/m²

Designed for low intensity (low perspiration) skiers seeking a comfortable and warm undergarment.

Maximum washing temperature 30°C. Normal cycle.

Condition

Intensity

Reversible

Style

The BL 100 Ski Base Layer Bottoms have a regular cut.
This is a classic, straight cut. Suitable for all body shapes.

How do the BL 100 Ski Base Layer Bottoms fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


What are the benefits of polyester?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model wears size M and is 175 cm (5’9”) tall.
Measurements:
Waist size: 67 cm (26”)
Hip measurement: 99 cm (39”)
Chest size: 90 cm (35”)

To help you choose the right size

Ski Leggings & Tights

Component encourages wicking and minimal drying.

Developed for low intensity (low perspiration) skiers who are looking for a warm base layer in cold weather.

Collar Type

sleeve length

anti-uv

The BL 100 Base Layer Top has a regular cut.
It is a classic straight cut that adapts to a wide variety of body shapes.

How does the BL 100 Base Layer Top fit?

You only need three technical layers to stay warm on the slopes: Layer 1 or a base layer, to stay dry. Layer 2 or an insulating layer, to keep heat in. Layer 3 or a protective layer, to protect against bad weather.

How to dress to stay warm on the slopes

This product is repairable.We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

Ski Base Layers

Compact and fits easily in a pocket or backpack.

Compact design

This simple, fleece, neck warmer is designed to protect your neck from the cold this winter.

Skill Level

This Firstheat model is also available in a hat version.

Outfit

Ski Neck Warmers & Balaclavas

60 g/sqm wadding, brushed polyester lining, comfort temperature down to - 4°C.

5,000 mm membrane (Schmerber) and partially taped seams.

Semi-elastic waist, belt loops, strap loops.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Elastic gaiters in the lining keep snow out.

Limits snow entering

Ready to have a go on the slopes? These warm and comfortable waterproof pants will protect you from bad weather. The gaiters go over your boots.

type of lining

Season

Type of Brushing Boots

RECCO system

type of waterproofing

Schmerber

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of a water column in mm. The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Waist size:84 cm (33”)
Inside leg length: 86 cm (34”
Hip: 101 cm (40”)

Two-fabric to protect you from the cold, in addition to the helmet.

2 materials, can be worn in 6 different ways.

Flexibility

Worn over the face, the jersey part provides good humidity transfer.

This neck warmer is practical and clever: it can be worn 6 different ways to efficiently protect you from the cold. 

pattern

reflective

Tightening Type

On the product packaging, you will find 6 ways of wearing the Hug (hat, balaclava, neck warmer, etc.).

Modular

Waterproof membrane and water-repellent outer fabric.

Abrasion resistance

Beat the cold in style with these beautifully designed ski mittens. They will keep your hands warm on the slopes.

abrasion 

Reinforced Palm

Stitching Type

anti-slip

leash

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Loss prevention system

Simply pull the wrist strap with the opposite hand.

Easy to put on

Air dry, but especially not on a radiator!
These gloves contain leather, and leather detests water: don’t wash them, even by hand, to avoid damaging them.
To keep them flexible and in the shape, hydrate the leather with a suitable balm, like one you would use on your own skin.

Leather care advice

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier, making the product waterproof. The product’s exterior materials are also treated for water repellency. 
In extremely wet conditions, a glove with a membrane cannot be as "waterproof" as a glove made out of "rubber" type material.

Waterproof membrane

All Wedze gloves and mittens have a water-repellent treatment that makes water slide off the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water-repellent. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

Water repellency

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof features reduce windchill due to wind speed or the relative speed of your activity.

Snowboard Gloves & Mittens

clearance

Good: brushed polyester component, high coverage turtleneck (210 g/m²).

Enjoy its comfort and warmth in all circumstances! Our breathable base layer guarantees comfort on the slopes, even at moderate intensity. 

The BL 500 ski base layer has a standard straight cut that adapts to all body shapes. It’s not too loose, so it keeps in the heat effectively.

We commit to repairing your product free of charge for the duration of the warranty. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

Polyester is the most commonly-used fibre for base garments because it is relatively inexpensive and offers excellent performance in various respects, and especially because the fibres can be knitted to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.

Benefits of polyester

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

60 g/m² wadding. Comfort temperature: 5°C

Elastic waistband with gusset for maximum freedom of movement

Leg length adjustable by press stud. 
2 positions: -4 cm and -8 cm.

Built-in loop system for adding our shoulder straps.

Stability

Stay dry on the mountain with these waterproof pants. 

Ventilation Zippers

Fastener Type

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website  (reference 8751391).

The fitted cut combines elegance and performance, flattering your figure regardless of your body shape. We tested this product on different women to offer you our best design.

How do the PA 500 Ski Pants fit?

We lab-test each of our products to provide you with a value indicative of the item’s comfort temperature. This is measured without tights for pants, and with a thermal T-shirt and fleece for jackets. The measurement indicated is that of the external temperature in which our testers perceived a warmth of 0 (neither hot nor cold). Of course, this perceived temperature varies with the intensity of the activity and the metabolism of the individual.

To keep your legs warm and dry, two layers of clothing are enough:
- a ski base layer to wick away perspiration.
- ski pants to protect against bad weather and provide warmth.

Keeping your legs warm on the slopes

To optimize your product’s performance and durability, we recommend: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring the product out by hand. * Dry flat or tumble dry.
Do not dry clean. Do not place on a radiator.

How to wash your ski pants

During the warranty period, solutions may be offered to you at your regular store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

100% anti-UV with interchangeable brown and yellow lenses for all conditions.

Sun protection

Essential anti-fogging, dual lens with anti-fogging treatment.

Anti-fogging

Wraparound lens with Essential field of vision.

Field of vision

User comfort

Size L with glasses, 145-mm width maximum.

Compatibility

All-weather ski and snowboard goggles with interchangeable lenses. Can be worn with prescription eyeglasses

Strap Type

Technical Lens

Compatible with prescription glasses

Field of Vision

Minimizes Fogging

glass composition

fogging treatment

Glass Category

Case Type

With Case

Diving Mask Type

Because UV rays are harmful to eyes, all our goggles are certified 100% anti-UV in accordance with the EN 174 standard. Goggles, which perfectly enclose the eyes and prevent any direct or reflected UV light from entering, provide the best protection.

UV Protection

Ski goggles with interchangeable lens for all-weather use. 
S1 Fog is a light lens offering improved vision of terrain in bad weather.
S3 Sun is a dark lens that protects you from bright sunlight. 
Lenses are not scratch-resistant.

Interchangeable lens

Essential anti-fogging is a dual lens with treatment on the inside of the inner lens.
To ensure effective ventilation, do not block the vent with a neck warmer, for example.
Be careful not to rub the inside of the lens, but carefully dab the surface to maintain the effectiveness of the anti-fogging treatment for as long as possible

Essential Anti-fog

Goggles with dual screen reduce condensation. The air trapped between the lenses creates a layer of thermal insulation. The thermal shock between the inside and the outside of the goggles is lower, limiting fogging on the goggles’ inner lens. The inner lens also has an anti-fog treatment.

Double lens

The cylindrical double lens is made of polycarbonate (outer lens) and cellulose polycarbonate (inner lens) cut to fit the goggles.

Wraparound lens

There is a vertical and a horizontal visual field. The G 100 has an Essential field of vision, providing good, safe visibility on the sides.

Essential Field of Vision

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Sports/

Winter Sports/

Ski Gear/

Ski Clothing/

Ski Jackets/

Women Ski Jackets/

wedze

Women's Warm and Ventilated Ski and Snowboard Jacket, 500