150 g/m2 padding. Soft, thick fleece lining. Snow skirt.

Warmth

5,000 mm-rated coating, 100% taped seams. Hood.

Waterproof

Adjustable sleeve length. Hook-and-loop tab cuff fastening.

Adjustable

Breathable, perspiration-wicking component.

Breathability

Soft, warm material on the back and nape of the neck.

User comfort

Jacket with 3 secure pockets, including 1 for a ski pass.

Pockets

Label on the lining for writing your child’s name.

Customization

These ski jackets were designed for kids as they develop their skiing ability and as they grow.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Snow Skirt

Ventilation Zippers

Frequency

type of lining

Season

sleeve length

Windproof

Pocket

RECCO system

type of waterproofing

type of hood

thumb pass

Type of Length

Hood

Style

Schmerber

Main Material

The ski jacket’s innovative Pull’n Fit System lets you adjust the sleeve length easily to fit your kid. Your kid will be all set for at least a couple of years!

Pull’n Fit System

Thermal insulation will keep your young skiers at just the right temperature. This garment adapts to the body’s movements and to the outside environment. Wedze uses wadding for insulation to keep the body warm. 
Wadding is a synthetic component made from polyester that stores more or less air, depending on the length of the fibres. The thicker the wadding, the more air it contains and the warmer it is.

Thermal insulation

The coating is a waterproof substance applied on the inside of the jacket fabric’s exterior. It prevents water from seeping into the garment but allows perspiration to escape. This keeps kids dry and comfortable.

Coating

In addition to using a waterproof fabric, the jacket’s taped seams make it even more watertight. Waterproof adhesive strips taped to the inside seams make this product fully watertight. The taped seams are in the areas most exposed to snow. On this jacket, these are the shoulders and chest.

Taped main seams

The snow skirt at the waist offers additional protection. It closes automatically when the ski jacket is fastened. It keeps snow and cold wind out, especially in the event of a fall.

Snow skirt

No need to get your ski pass out any more! The sleeve has a ski pass pocket for easy access to the lifts.

Ski pass pocket

A label at the top of the lining allows you to write your child’s name. Practical for finding their jacket after ski class or at school.

To make sure you stay warm and dry, we recommend using the 3-layer rule:- Layer 1, a base layer to keep you dry. - Layer 2, an insulating layer to keep you warm. - Layer 3, a protective layer against the elements.

How to dress your children so they stay warm on the slopes.

Kids' & Babies' Winter Clothing

Lined in 60 g/m² wadding and 140 g/m² fleece

Waterproof coating to 5,000 mm (Schmerbers). Fully taped seams.

High waistband, integrated snow gaiters, and stretchy cuffs.

Limits snow entering

Abrasion resistance

Write your child’s name on the label inside.

Designed for regular hiking in snowy and windy conditions.

reinforced area

Number of Pockets

belt height

Type of Brushing Boots

Place of Practice

modular

Type of Bell

We also incorporated a wadding lining and soft, warm fleece into these pants. The synthetic fleece is as warm and insulating as wool but more lightweight. Soft and comfortable, quick-drying and breathable. The fleece’s texture traps air to keep kids’ bodies warm with natural insulating power.

How do these pants keep my child warm?

These pants have wadding and a fleece lining. That means your child doesn’t need to wear tights with them, as this can make your child too hot.

Should my child wear tights under their pants?

We integrated gaiters at the cuffs to keep snow out. Plus, the elastic at the bottom of the gaiters goes around your child’s shoe or boot to ensure the pants do not ride up.

Do the pants have gaiters to keep snow out of my child’s boots?

These pants are designed with a waterproof outer fabric that keeps out water and wind (before washing: 5,000 mm/Schmerbers for the main component). To stay warm in winter, you must also protect your extremities (head, hands, feet). 

How do these pants protect from outdoor conditions?

The waterproofing of a fabric is measured in Schmerbers or mm (pressure of a water column). The higher this number, the more waterproof the fabric. 
This product has a waterproof fabric resistant to 5,000 mm or Schmerbers before washing. 

Are these pants 100% waterproof?

For comfort and peace of mind, the seams of these pants are waterproof. They are totally waterproof. The waterproofing is verified by conducting a test that replicates the conditions of a two-hour rain shower. 
Waterproof, heat-sealed strips ensure seams are watertight. Applied behind the seams, these heat-sealed strips make the pants waterproof by preventing water seepage.

What does “100% taped seams” mean?

In winter, protection from both moisture (snow, rain) and wind is important, because wind can significantly cool the body. 
The waterproof coating means these pants qualify as windproof.

Reinforced fabric inserts on the knees and seat let children freely explore the world. Abrasion and friction resistance tests on the various components ensure their effectiveness.
The Martindale test measures a fabric’s abrasion resistance. A machine rubs a sample of the fabric on a reference surface with a weight at the end.

Will these pants withstand the intensity of your child’s activities?

Whatever your cold-weather activity, use the 3-layer technique: Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: Fleece provides warmth and wicks away moisture.
Layer 3: Pants to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How do I choose the right clothing for hiking in the snow?

To renew the fabric’s water repellency and optimize your garment’s performance throughout its lifetime, use a waterproofing spray or liquid after machine washing.

How can you properly care for these pants while maintaining their technical performance?

Comfort temperature:  -6°C
Limit temperature: -16°C.

Breathable and waterproof to keep your feet dry.

Tread with Snow Contact technology: sole materials and tread pattern for snow.

Grip

Easy dressing

The location and depth of the 3.5 mm (0.14”) lugs provide traction on snow.

Traction

Designed so your kids can enjoy the snow! Simple and effective for snowy outings.

Condition

Removable Sole

comfort temperature

Outsole Technology

Boots Type

Lining Material

Foot Width

Boot Height

Tightening Type

Fastener Type

We perform comparative studies in a thermal laboratory in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. Everyone feels the cold differently.Comfort temperature: Felt slightly cold and 70% of users experienced thermal comfort in the boots.
Limit temperature: Felt extremely cold and 10% of users found experienced thermal comfort in the boots.

Are these boots warm enough for winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) on the inside of a fabric that prevents water from entering, but allows moisture to escape.

How do these boots protect from outdoor conditions?

We made sure that your boots are waterproof by conducting lab tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. 

Are my boots 100% waterproof?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

Follow these principles for your winter activities. 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can get wet from condensation and perspiration.
If your boots are very wet, remove the insole, fill the upper with balls of newspaper, and change the newspaper regularly. The paper will absorb the moisture and dry them faster.
Never put the boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Toddler & Kids Hiking Shoes

clearance

Rubber sole providing excellent grip and durability

Waterproof membrane tested on an 8 km walk in water up to the mid upper

Highly protective sole and reinforced upper.

Robustness

Cushioning

Lightweight

These shoes are made for running, hiking, climbing, jumping, and playing.

Weather Conditions

Shoe Height

Sole design that has been the subject of extensive research in our laboratories, combined with a specific rubber formulation to optimize grip and traction. Because all needs are different, we always strive for the best balance between muddy and dry terrain.

Sole grip

Let your child try on both boots, standing up, wearing their hiking socks. Try on several models or sizes if necessary. Check the following two areas of comfort: the heel and the front of the foot when going downhill. There should be no pressure points. Have your child walk around the store. Gradually increase the length of time they wear the shoes during initial walks to break the shoes in.

Purchasing advice

For hiking, consider choosing one size up from your usual size to ensure optimal comfort when heading downhill and to prevent your toes from hitting the front of the shoes. Advice: keep your nails short and, before heading downhill, check that your lacing prevents your feet from sliding towards the front of the shoes.

Which size should you choose?

The shoes' waterproofing is often compromised by water getting in from the collar. So to keep your feet dry longer, it's advisable to use waterproof gaiters or mini-gaiters that will keep out water as well as pebbles, sand, etc. Using a waterproofing spray several times a year is recommended. This restores the original water repellent properties and prevents staining.

Making waterproofing last longer

Footwear waterproofing test: lab- and field-tested, shoes with a breathable, waterproof membrane ensure optimal rain protection. The shoe is immersed in water while internal air pressure is applied to check that no bubbles form on its surface. They are half immersed while on a mechanical arm that simulates walking: we then check that the inside of the shoe remains perfectly dry.

Waterproofing test

During the waterproofing test, we test 3 levels of waterproofing, i.e. 2000 flexes (about 2 hours of walking), 4000 flexes (about 4 hours of walking), and 8000 flexes (about 8 hours of walking). The kids' Crossrock waterproof shoe is waterproof for 4000 flexes.

3 levels of waterproofing

Protects from light rain. Water slides off and is not absorbed by the fabric.

Water repellent

Only 406 g (14.3 oz) in size 10–11 years

Very pleasant liner fabric, used also in the hood

Softness

Stretch fabric to encourage freedom of movement.

Freedom of movement

2 zippered pockets to carry your belongings safely

This padded jacket lets kids get the most out of cold-weather activities. It's just as good for school as it is for getting around town.

Air Temperature

Pack

Zipper Type

Water repellency is achieved by applying a treatment to prevent water from absorbing into the fabric. 
Water rolls off without being absorbed so the garment remains light, breathable, and warm. This product is water-repellent, not waterproof.
The treatment should be reapplied to remain effective. Use sprays that are applied to the outside, rather than additives used when washing the garment, which can damage the product’s breathability.

Water-repellent properties

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

Product design: our expertise

Hiking Jackets

It’s up to you! Wear them on your wrists, ankles, or both!

Versatility

Flexibility

Our weights should be hand washed or washed on a delicate cycle only.  

Easy maintenance

These soft dumbbells free up your hands during strength training! You can build your strength gradually without straining your joints, from 250 g to 1 kg.

Dumbbel Weight

Skill Level

dumbbell shape

Weight (kg)

Packaging

These weights can be adjusted from 250 g (0.55 lb) to 1 kg (2.2 lb): they contain four 250 g (0.55 lb) weights. You can add or remove the weights depending on which muscles you’re planning to work.
If you’re new to weight training, we recommend starting with just 250 g (0.55 lb) for your upper body.
You can then increase the load once you’re stronger or if you feel like it isn’t working you hard enough.

How do you know how much weight to use?

Our flexible weights are washable! 
- Remove all of the weights from the wristband
- Put the wristband in a laundry bag and wash at 30°C 
- Air dry

Put the weights back in before your next workout

These weights are easy to wash!

When training, you have the choice between dynamic and static movements (where you don’t move your feet). 
These soft wrist and ankle weights are practical and adjustable, making them perfect for dynamic movements like leg extensions.
Dumbbells are a better choice for static movements, such as squats or lateral arm raises. They are easier to hold and will help you stay balanced.

Static or dynamic?

Dumbbells

Sole’s material and geometry helps drain the water through channels

Easy removing thanks to the collar structure and the heel lug

Lightweight material, now just 456 g in size 2/2.5

These waterproof boots are designed to keep your child’s feet dry on a boat, in the rain, or even on a trip to the seaside.

marking outsole

Weight (g)

Precipitation

Sock Height

Stitching Type

Reinforced Rubber Boots

shoes with left or right mark

Playing Surface

Sole Type

These boots are lab-tested to verify waterproofing, then tested in real-life conditions.
The boot’s one-piece construction ensures that no water can enter.

Fully waterproof

We developed a scale to measure and rate the traction of our products in the lab.
Traction is determined by the material and design of the sole. This product has a grip level of 3 out of 5.

How do you measure the grip?

This model comes in double sizes. It’s important to choose a size that fits snugly when you’re wearing your usual socks.
A boot that’s too big may not provide enough support or traction, and can cause chafing.

How to choose the right size

The top of the boot features a ridged strip that provides extra grip while you’re pulling it on.
The heel has a lug that you can push down to remove the boots easily, even while standing.

Easy to pull on and off

If water gets in through the top of the boot, remove the insole, rinse out the boot, and dry thoroughly by placing it upside down over a broom handle. Dry in a well-ventilated area. Turn the boot over and slip it onto a broomstick.

How to dry your boots

The boot’s collar may seem wide compared to your child’s calf. This is intentional. The collar should be roomy so your child can put their boots on without your help. The collar must leave enough space.
This design choice helps your child become more autonomous.

Wide collar

Size 2/2.5: 
Boot weight: 456 g (16,1 oz)
Outer boot height: 22 cm (8.7 in)
Inner height: 20 cm (7.9 in)
Width: 35 cm (13.8 in) at calf.

Lined for extra warmth and comfort.

The moulded, removable sock liner is machine washable.

Do not wear barefoot. Avoid wearing shorts, rubbing can irritate children's calves.

Technical features

To clean your boots, simply run them under water and scrub with a sponge. For stubborn dirt, scrub with a little soap and a wet sponge.

wedze

Kids’ Ski Pants, 100 Age 6-14