clearance

Compatibility

Replacement chain for your 9-speed bike. Compatible with 9-speed Shimano, Campagnolo, and Sram derailleurs

Condition

Intensity

Number of Speeds

Number of Links

Main Material

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

Mounting

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Dismantling

Number of links

Bike Chains

29" diameter tires with a 1.90 to 2.50 cross-section.  

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 29" tires, with a 1.90 to 2.50 cross-section and a 48 mm Presta valve.

Tire Assembly

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 29 x 1.90 means that the tire is 29" in diameter and 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-622 means that the tire is 50-mm wide with a 622-mm inner diameter (approx. 29 x 2.00).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

9-speed right shifter compatible with Btwin, MicroShift, and Shimano. 

Designed for replacing the shifter on a 9-speed rear derailleurs.

Control Type

Control Position

Our technicians are available to help you replace the parts of your bike. Feel free to ask them for help!

Need help?

Rockrider

onlyonline

Easy assembly/dismantling

Replacement quick-release link for your 9-speed chain.

Tool-free assembly:
-fit the two links together
-give the crank arm a sharp turn
-check that the links are correctly in place before use

Installation

A quick-release tool is highly recommended to avoid damaging your chain.
https://www.decathlon.fr/pince-attache-rapide-chaine-id_83523.html

Removal

The technicians at your Decathlon store workshop are available to help you replace the parts of your bike. Feel free to ask them for help!

Capacity

Secured with 2 straps and a rear loop for the cargo cage connector

Stability

Designed for bikepacking adventures on demanding terrain and in rainy weather conditions

Volume (L)

Height (cm)

Skill Level

Weight (g)

reflective

Position

Attachment Type

Volume

Its dimensions and slightly flared shape make it the perfect home for your Forclaz MT 500 1-person (84927222) and 2-person camping pan (8492723)

Compartments

Watertight bag with roll-up fastening and welded assembly, offering extra protection against water.Tested according to the IPX6 standard, it withstands powerful jets of water (100 L/min) from all directions.

Water resistance

Everything is held in place by the 2 sturdy nylon straps and the exclusive strap loop at the back, which is compatible with the cargo cage connector.8669960)

Main component: Solution-dyed PU coated,TPU laminated 600D polyester
Rear and roll top reinforcement:Solution-dyed PU coated,TPU laminated recycled polyester ripstop

Material/component

Weight

2 nylon straps (included) and quick clip fastening

Fastening/Attachment

Roll-up fastening.Three turns are necessary for a perfect watertight seal.

Zip/Fastening

Compatible with the cargo cage (ref:8669960).
Cargo cage not included. 
Do not use directly on the fork without a cargo cage.

Reflective strips to be visible at night.

Visibility

We do our utmost to use the least abrasive materials possible and design products that offer optimum stability. However, friction can sometimes occur between the bag or harness and the frame of your bike.To protect your frame and avoid possible abrasion, we strongly recommend that you apply protective stickers to the contact areas.

PRECAUTIONS FOR USE

Bike Bags & Backpacks

Built-in valve to force the air out when closing the watertight bag

Easy opening/closing

Built-in valve to force the air out when closing the watertight bag.

Valve for to empty air

For optimal stability, be sure to place the watertight bag in the right direction (valve on left and the reflective strips aligned with the shape of the harness)

Main component: Solution-dyed PU coated,TPU laminated 600D polyester
Roll top:Solution-dyed PU coated,TPU laminated recycled polyester ripstop

Compatible with the ADVT 900 saddle harness (ref.8912309)

For Btwin- and Shimano-compatible 7- to 9-speed drivetrains.

Designed for bikes with 8 or 9 speeds and a double or triple crankset.

Derailleur Position

Cage Plate Length

Cage length: Long.
Maximum teeth: 36 teeth
Min teeth:11 teeth
Steel body.

Features

Bike Derailleur

For a 1 1/8” (28.6 mm) steerer tube and oversized handlebars (31.8 mm).

Designed to improve your comfort and position when riding.

Practice Conditions

Stem Type

Length (mm)

Suitable for 1" 1/8 (28.6 mm) fork steerer tube and 1" 1/4 (31.8 mm) oversize handlebar.Torque the fork steerer tube to 8 Nm and the handlebar to 6 Nm.
6061 aluminum body, steel screws.
Weight: 134 g.


Technical information

Bike Stem, Posts & Clamps

Removal using an open-ended spanner and a chain-whip tool.

Removal using a 21 mm open-ended spanner and a chain-whip tool.

Ease of use

Robustness

This tool was designed for removing and/or mounting your Shimano or Sram type cassette

A chain-whip tool is needed to use this tool for dismounting a cassette.
The chain-whip tool prevents the cassette from turning, so that the support nut can be unscrewed.

Advice from our team

Bike Cassettes

Warmth

Water repellent

Durability

Zipperless design makes it easy to put on.

Easy dressing

Overshoes specifically designed for road cycling in temperatures between 3°C and 10°C.

Weather Conditions

Toe Clip Type

stirrup

gaiter height

Fastener Type

When it comes to waterproofness and durability, the weak link for overshoes is usually the zipper. The zipper is the most fragile part and will usually fail first due to the amount of pressure at the heel. 

Why no zipper? 

Here’s how to put it on without a zipper. Step 1: pull the overshoe on and up over the calf. Step 2: put your shoe on. Step 3: pull the overshoe back down over the shoe. 

Instructions

This product is designed to be used with road cycling shoes, which tend to be narrow. If your shoes are wider than average, then buy one size larger. 

Sizing

If your tights aren’t water repellent, they’re highly likely to soak up rain. Even the best overshoes in the world wouldn't help: if your tights are in contact with your socks, they'll absorb water through the capillary effect.
This is why all Van Rysel winter tights, such as the Racer long tights, are created with a water-repellent membrane.

Capillary action

Cycling Shoes

Compatible with 11-speed drive trains and Shimano LG-500 chain for Cues

Replacement chain for your 11-speed bike. Compatible with 11-speed Shimano, Campagnolo, SRAM, and Shimano Cues derailleurs

Assembly

The fabric maintains your body heat for maximum comfort.

Stretch

A hydrophilic membrane wicks away perspiration efficiently.

Breathability

Designed for comfort and freedom of movement during workouts. Keep you warm during your warm-up.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Maximum washing temperature 30°C. Normal cycle.

fixed cords

reinforced area

Number of Pockets

belt height

Reversible

Place of Practice

modular

Windproof

anti-uv

Pocket

Type of Length

maternity

Customization

Type of Bell

To feel good at the gym, the most important thing is to go for sports clothes that are both technical and comfortable. The fabric must be breathable to wick away perspiration and keep you dry during intense workouts. The cut should not hinder your movements. The slim fit of these sweatpants follows the shape of your legs without being too tight.

Which pants are best for fitness?

These sweatpants have many advantages. The two side zippered pockets and back pocket are practical. The elastic waistband with its drawcord allows you to tighten them for a perfect fit. A comfortable street-wear look that makes them easy to wear both at the gym and everyday.

Why choose these sports pants?

Wear these sports pants with a matching fitness jacket, sweatshirt, or T-shirt.

What should I wear with these sweatpants?

Men's Workout Pants

Waterproof coating 5,000 mm (Schmerbers) | Taped seams

Zipper at the bottom of the legs makes them easier to put on with shoes.

Anatomic design

Hydrophilic coating (RET = 12): reduces condensation in the garment.

Lightweight, compact top-layer pants | Weight: 200 g (7 oz.) in size L 

Lightweight

Designed for occasional hikes on easy trails in rainy conditions.  

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Frequency

Precipitation

Schmerber

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water pressure (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

Water resistance (fabric)

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
RET < 9: extremely breathable fabric
RET < 12: very breathable fabric
RET < 20: breathable fabric
RET > 20: little or non-breathable fabric.

Fabric breathability

The fabric for this jacket is water-repellent: water slides off its surface. In this way, the fabric doesn’t soak up water and stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free. As a result, this model will be sold with a more environmentally friendly water-repellent treatment.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain waterproofing over time

How much you perspire depends on the intensity and duration of your physical activity.If the fabric isn’t breathable enough for the type of activity/exercise, your perspiration will condense inside the item.The jacket will feel damp inside. This dampness is not rain soaking through but condensation caused by perspiration. This means you need to choose top-layer pants suitable for your activity.This product is designed for 2-hour hikes at no more than 5 km/h (3 mph).

Choosing waterproof rain pants based on physical effort

For full-body protection from the wind and rain, we recommend the Raincut 1/2 zipper or full zipper men’s jackets.   

Other recommended products

Men's Hiking Pants

Compact design

Gears: 11/13/15/18/21/24/28/ 34/42
11 x 42 Teeth

Degrease, clean, and lubricate your cassette regularly for prolonged life. We recommend replacing the chain each time the cassette is replaced. Do not clean using high-pressure water jets

Care instructions

Easy assembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable or open-ended spanner.

Easy disassembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable spanner or open-ended spanner and a chain-whip tool.

Sports/

Cycling/

Bike Tools and Components/

Bike Drivetrains/

Bike Cassettes/

decathlon

Mountain Bike Casset 9 Speed 11 x 42