Waterproof coating for 2 h of protection (5,000 Schmerbers), 100% WTP seams

Waterproof

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Breathability

The elastic waistband and loose fit make them easy to put on over pants.

Freedom of movement

Only weighs 146 g (5 oz.) in size 10–11 years.

Lightweight

Designed to protect your child from the wind and rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Pocket

Type of Length

Type of Bell

Schmerber

Main Material

This garment has been subjected to a shower test using 60 L of water/sqm/hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
A waterproof rating of 5,000 mm means the fabric can withstand pressure exerted by 5,000 mm of water (the equivalent of a rain shower lasting for two hours).
 Waterproofing is expressed in Schmerbers (for example: 5,000 Schmerbers).

Waterproof feature of the component

Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: Little breathability.
 
Our product has a 12 RET rating.

Component breathability

A fabric is water-repellent when water slides off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (every 3 washes). 

Component waterproofing

Technical details

Kid's Hiking Pants

The waterproofness of these shoes has been lab and field tested.

Rubber sole for excellent grip and durability.

Grip

High-coverage sole and reinforced materials.

Durability

These high-top, waterproof shoes give children the freedom they need on their adventures. The grippy soles are perfect for running, climbing, and jumping. 

Removable Sole

Shoe Height

Foot Width

Tightening Type

These shoes are available in sizes 10.5C–2.5. For optimal comfort on hikes, opt for one size above your child’s normal size. This will prevent tightness around the toes on descents.

What size should I choose?

Get your children to wear their hiking socks and try on both shoes, standing up. 
Check two comfort points: the base of the heel and the front part of the foot while going down. Have your children gradually try them out on their first few outings to get used to them.

How to test the shoes

With use and over time, the shoes’ waterproofing capacity may diminish. To reactivate their water-repellency and prevent stains on the outside, we recommend using a re-waterproofing treatment product after one year.

How do you extend the waterproofing capacity of your shoes?

Toddler & Kids Hiking Shoes

clearance

Warmth

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

Customization

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

Condition

Skill Level

reflective

Reversible

Beanie Length

Type of Beanie

Style

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Kids' Ski Clothing

Diam. 23 cm/9” x 2 cm/0.8” (height) | 180 g/6.3 ozStackable, generous.

Ease of use

0.6 L (20.3 fl oz) volume plate—ideal for delicious meals when camping, hiking.

Capacity

This plate fits perfectly into the Quechua 900 4-person cooking set.

Compatibility

Durable thanks to its 100% stainless steel construction.

Place in the dishwasher or hand-wash with soapy water.

Easy maintenance

This extra large 23-cm stainless steel plate with rim is perfect for picnics or camping trip meals.

Volume (L)

Weight (g)

isothermal

non-stick coating

Heat protection system

With Handle

Foldable

Number of Users

Generously sized without being too bulky, this XL plate can hold large meals, while also remaining practical: stacks easily for optimal space saving. Beware: stainless steel conducts heat: you risk burning yourself with very hot food. Not microwave safe.

How do I use this XL plate?

Cleans easily with a sponge and soapy water. To save time, the plate is dishwasher safe. Remember to dry it well before packing it away.

How do you clean the XL plate?

We selected 18/8 (304) stainless steel for its high resistance to corrosion, ease of maintenance, longevity, and neutrality in terms of food contact. All of our products and materials meet current food contact standards and are BPA-free.

What is the camping cup made of?

Weight: 180 g (6.3 oz) 
Dimensions: 23 cm (9”) diameter x 2 cm (0.8”)
Capacity: 0.6 L/20.3 fl oz

Weight and dimensions

Camping Utensils Set

Keep your liquids warm for 7 hours with the stainless steel double wall

Isothermal

0.5 L | 330 g | Dimensions: Ø8.5cm x 15.6cm

Drink without splashing thanks to the 100% watertight valve cover

Carry handle and cup holder for relaxing breaks anywhere 

Wide opening for easy cleaning. Simpler: dishwasher safe

Durable, 100% food-contact grade 18/8 (304) and ultra-resistant stainless steel

Cover available as a spare part, item reference: 8943554.

Repair

Our 500 ml double-walled isothermal mug keeps your drinks hot or cool. Enjoy your drink, wherever you are, even in your car.

Cook/Drink/Eat

Sold In Set

Duration of Action

We’ve tested this mug in the lab according to the EN 12546-1 Standard, at an ambient temperature of 20°C, and filled to capacity. The time it takes to drop from 95°C to 50°C is 7 hours.

How is thermal insulation tested?

Say goodbye to burns from excessively-hot drinks! Thanks to the double stainless steel wall of our isothermal mug, the warmth doesn't transfer to the sides. Your drink stays at the perfect temperature and your hands and lips are protected.

What is the advantage of the double wall?

Our new cover changes everything! It fits perfectly onto the mug for a complete seal. No need to remove it for drinking: Simply lift the lever and enjoy your drink with complete ease.

Why is the lid so special?

Need a reliable mug? Good news! All our products comply with food standards and are guaranteed to be free from Bisphenol A (BPA). Made of 18/8 stainless steel (304), it ensures maximum safety, while its polypropylene lid is resistant to heat and shocks.

About the materials?

Before first use, rinse three times in clean water. The main part and the lid can go in the dishwasher, but be careful not to lose the seals! For thorough cleaning, remove the seal from the lid. After washing, leave it to dry with the lid open.

How to clean the isothermal mug

Made from 31% merino wool, they insulate and protect from the cold.

They absorb and wick away perspiration for quick drying.

Moisture management

Special yarn and weave to reduce blisters on the Achilles tendon.

Reduced chafing

Polyamide reinforcement on the heels and toes to reduce the risk of abrasion.

Abrasion resistance

Asymmetrical fit (left and right socks) for improved alignment.

Anatomic design

With these socks, your young athletes will be able to stay out in the winter air without getting cold feet. 

Season

height of the sock

reduced chafing

moisture management

Packaging

When hiking in the forest, in the mountains or for everyday wear, your feet are subjected to significant constraints. Friction inside your shoes, combined with perspiration, can be unpleasant, while the cold can make for an uncomfortable experience without adequate protection.

Why should you choose a good pair of socks?

Designed to keep your feet nice and warm, these socks are made of 31% merino wool. Remember that to stay really warm, you need a good pair of winter hiking boots and socks, specially designed for adventure.

Do these socks keep you warm?

Wool has special properties: elasticity, thermal insulation, and comfort. It absorbs moisture to maintain a comfortable temperature, which is ideal in variable climates. Recognized for its durability, wool is the preferred choice for comfort and adaptability.

The properties of wool

Merino sheep, originally from Spain, have been bred carefully over many generations for their wool. It provides a softer fibre than traditional wool. After shearing, the wool is cleaned to remove impurities, then carded, spun, and finally used for knitting or weaving.

What is merino wool?

Merino wool offers an unbeatable experience: soft, lightweight, and breathable. Thanks to its fine fibres, it provides natural thermal regulation. It keeps your feet warm in cool weather and cool in warm weather. 

What are the benefits of merino wool?

Here are our tips for staying warm in the winter: 
- Wear winter shoes that are warm, waterproof, and breathable
- Wear wool socks for maximum warmth
- Ensure that the upper section of the socks are at the right height so that they align with your shoes

How to dress for a hike in the snow

This set includes two pairs of socks, offering a double dose of comfort and practicality for your daily life.

Two-pack

Hiking Socks

EVA fabric, 100% waterproof.
Taped seams. 

One size for kids from 126 to 156 cm (50 to 61”) approximately

Comes with a bag.
Size: 18 x 20 x 2 cm (7 x 8 x 1”)

Designed for kids who love to hike in all weather conditions and need proper protection.

Ventilation Zippers

sleeve length

Hood

126 to 156 cm (50 to 61”) approximately for kids
The snaps make this poncho easy to get on and off.

Fit and sizing information

Technology: This garment was subjected to a shower test using 60 litres of water/m²/hour for 2 hours. This test reproduces average rain conditions in the mountains.
The fabric’s resistance is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 1092 standard). It is 2000 m in this case. The higher the water pressure, the more waterproof the fabric.

Waterproofing

Kids' Hiking Jackets

Waterproof protection for 1 hour (5,000 mm) before washing; taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Ventilated back for greater comfort when hiking.

Ventilation

Weighs 312 g (11 oz) in size 10–11 years.

Pockets

A waterproof hiking jacket to protect your kids from the wind and rain.

Maximum wash temperature of 40°C. Normal cycle.

Sportsperson’s Height

type of waterproofing

breathability (in RET)

Removable Hood

Zipper Type

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the JIS 1092 standard).The higher the water pressure, the more waterproof the fabric. 
A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Windproof effect

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured by our suppliers in Vietnam, Ethiopia, and Bangladesh.
These are partners that have genuine expertise in making our products and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

Coated polyester fabric and rainproof sealed seams

This basic rain cover was designed to protect backpacks (40–60 litres) from the rain.

Type of Cover

Number of Compartments

Fastener Type

Construction

Weight

Hiking Backpacks & Bags

370 g (13 oz.). 11.5 L (2.5 gal) volume. Folds into a tidy stack. Elastic strap.

Easy transport

Dimensions 180 x 55 x 2 cm. Deep, thick, and comfortable.
Thermal insulation.

Sleep quality

Perfect for mild weather (>5°C).
R-value for standard ASTM F3340-18: 2,1

Thermal insulation

Folds neatly into a stack. Use as a seat, mat, cushion, or half-mattress.

Easy assembly/dismantling

This multi-purpose, folding foam mat protects you from the ground so you can rest in comfort while trekking or camping.

Sports/

Hiking & Camping/

Hiking Gear/

Hiking Footwear/

Hiking Shoes/

Toddler & Kids Hiking Shoes/

quechua

Kids’ Waterproof Hiking Boots, sizes 2.5-5, CROSSROCK MID