Fabric that wicks away perspiration for quick drying.

Moisture management

4 back pockets (including 1 zipped) and 2 side pockets.

Pockets

This jersey was designed for you to start cycling in hot weather, on rides of up to 2 hours or 50km.Cut:Regular fit.

Maximum washing temperature 30°C. Normal cycle.

Intensity

Skill Level

Collar Type

Season

Weather Conditions

sleeve length

Waterproof

anti-uv

Pocket

Style

Main Material

Machine wash at 30°C. Synthetics cycle. Turn the garment inside out. No fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not bleach. Do not place on a heater to dry.

Care tips

"Regular" cut suitable for all body types.

Men's T-Shirts & Tank Tops

100% effective on all types of Butyl inner tubes.

Compatibility

Less restrictive and just as effective as a classic patch.

Ease of use

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Condition

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

clearance

Vents and internal channels ensure continuous airflow.

Ventilation

A light, In-Mold helmet, 275 g in size M.

Weight

Easy dressing

Subject to the same ventilation testing as the Aerofit 900 helmet

Aerodynamics

Anatomic design

This variation on our Aerofit 900 helmet was designed with a brand-new adjustment system for added comfort.

Adjustable Helmet

Ventilation Zippers

anti-insect grid

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

integrated lighting

Bluetooth Connection

Detachable Visor

Fastener Type

Sizes

Size M: 275 g (9.7 oz)
Size L: 330 g (11.6 oz)

Weight 

With in-mold technology, the external polycarbonate shell is moulded while expandable polystyrene (EPS) is injected. 
The resulting structure is harder, sturdier and extremely light. 
The inner EPS structure absorbs the energy of impact while the hard outer shell ensures durability.

In-mold technology and EPS

Make sure the helmet fits properly.

If not entirely satisfied, please return or exchange, according to our return policy, along with the instructions, labels and any original packaging so that it can be repurposed.

Return policy for cycling protective gear

Complies with standard EN 1078 for bikes, inline skates, and skateboards.
EN 1078 is a European standard for testing methods and requirements for cycling, skateboarding, and skating helmets.

This standard covers the following aspects: construction (including field of vision), shock absorption properties, retention system features (including the chinstrap and tightening devices) and marking and information.

What does the EN 1078 standard cover?

Helmets

Ultra-lightweight and breathable fabric that actively wicks away perspiration.

Stretchy bands at the ankle and arch keep these socks in place.

Stability

Lightweight socks for greater comfort while cycling.

Lightweight

Designed with a thin polyamide weave, these mid-length socks dry quickly, keeping you comfortable in summer.

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

Packaging

Sock Height

Whether you use your bike for daily errands or for competitive racing, cycling is hard on your feet. Friction combined with perspiration can feel very unpleasant. Wearing specially designed socks can significantly increase your comfort!

The lightweight fabric wicks away perspiration for an extra comfortable ride.

Why wear Btwin Bike Socks?

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not use bleach. Do not place on a heater to dry.

Care instructions

Low socks measuring 10 cm (4") high in men's size 6.5-9 (women's 8-10.5).
There's very little height variation between sizes.

Sock height

Men's Socks

Pre-shaped medium density foam pad.
Thickness: 13 mm
Density: 100 kg/m3

Sitting comfort

Stretchy fabric ensures shorts stay in place at the waist and thighs.

Freedom of movement

Fully co-designed cycling shorts. Special attention was paid to the waistband and hems: an excellent fit without excessive pressure!

Maximum wash temperature of 30°C. Very delicate cycle.

Length

Frequency

reinforced area

retaining strip

Stitching Type

Type of Length

Zipper Type

With Straps

To ensure greater comfort in the saddle, we created this medium density chamois pad.
The fabric is soft and breathable. The padded zone is soft, with a density of 100 kg/m3 and a thickness of 13 mm. Perforated fabric actively wicks away perspiration. The pad keeps you comfortable on rides of up to 2 hours.

Our new medium density pad

The shape of the padded zones was defined by tests on a sheet of pressure, designed from a dummy moulding and approved after various trials and usage tests. These tests, conducted on real cyclists, involved measuring the pressure points on the saddle. The padded zone covers contact points where pressure is greater. There is a dart at the front for a better fit.

Shape

The ischium bone and the perineum are covered and protected. The reinforced area between the legs is relatively narrow to prevent irritation from rubbing while pedalling. Channels have been embossed into the reinforcements to provide greater flexibility.

Reinforced areas

Machine wash at 30°C. Wash on a synthetics cycle. Turn the garment inside out. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Based at the Btwin Village in Lille, our product design team constantly works to make cycling more comfortable for our users.
We strive to create products that meet our users’ specific cycling needs and eliminate unnecessary features.We then test our products in the field, as we are convinced that subjecting them to real-world conditions, like the ones you experience on your bike, is the only way to continuously improve our products.

Product tests

Men's Leggings

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

This light, In-Mould helmet is less compact than the 900 model.

Subject to the same ventilation testing as the Aerofit 900 helmet

This variation on our Aerofit 500 helmet was designed with a brand-new adjustment system for added comfort.

Certification

Size M: 55–58 cm (21 1/2 - 23")
Size L: 59–61 cm (23 - 24")

The Mips system means you lose 1 cm (2/5”) of head space compared to a classic RoadR 500 helmet.

The Mips system consists of a layer with a low coefficient of friction, which allows for 10-15 mm (2/5 - 3/5”) of multidirectional movement during certain angled impacts.
This movement reduces the rotational force transmitted to the head.

For more information, visit mipsprotection.com.

Mips

Size M: 330 g (12 oz.)
Size L: 360 g (13 oz.)

With in-mould technology, the external polycarbonate shell is moulded while expandable polystyrene (EPS) is injected. The resulting structure is harder, sturdier and extremely light. The inner EPS structure absorbs the energy of impact while the hard outer shell ensures durability.

In-mould technology and EPS

Make sure the helmet fits properly.

If not entirely satisfied, please return or exchange, according to our return policy, along with the instructions, labels and any original packaging 

Return policy for cycling protective gear.

Complies with standard EN 1078 for bikes, inline skates, and skateboards.EN 1078 is a European standard for testing methods and requirements for cycling, skateboarding, and skating helmets.
This standard covers the following aspects: construction (including field of vision), shock absorption properties, retention system features (including the chinstrap and tightening devices) and marking and information.

Maximum pressure: 6 bar/87 PSI (MTB/hybrid/city/kids' bike)

Power

Clip connection. Reversible to fit different valves.

Valve Type

deflating mode

hose

type of connexion

number of compression tubes

inflation mode

Pressure Gauge

Tubeless compatibility (Tyre)

Sold In Set

Pressure (Bars & PSI)

Length (cm)

Pump Type

Clips onto the valve. Adapts to different valve types by removing and reversing the pump head.(See instruction manual).

Valve compatibility

Bike Pumps

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Position

Bike Hydration

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Wide elastic and silicone strips at the thighs.

Quick drying thanks to active sweat-wicking fabric.

Super handy pocket on the outside of the thigh for easy access while riding.

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

Number of Pockets

belt height

Reversible

The Endurance collection is for all cyclists looking for comfort, no matter the distance. 

Our designers and engineers pay particular attention to your comfort on the bike at every step of the design process. 
Our aim: make you (almost) forget what you’re wearing and simply enjoy the pleasures of road cycling.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:

• Discover: simple, effective products, suitable for beginner cyclists

• Endurance: main collection for experienced cyclists looking for comfort for their cycle outings.

• Endurance Ultra outfits specially designed for long-distance and touring cyclists.

Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- silicone elastics around the thighs for excellent hold when pedalling
- a fit that is close without compression, so you can forget you're wearing it
- two easily accessible side pockets

How our Endurance cycling shorts were designed

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle.

Developed for men’s bodies, it is made of stretch layers that follow your body’s movement when pedalling.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. Both in the ischial and perineal areas. It has a protective, high-density, 120 kg/m³ foam insert. The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. 
All layers are extremely breathable.

Breathable, high-density foam

Men's Sports Shorts

onlyonline

Effective at a fast pace: 40 lux, 300 lumens, and wide beam.

Visual efficiency

Up to 300 lumens at the front and 25 lumens at the back for 360° visibility.

Visibility

Between 2 hours and 11 hours of battery life, depending on the setting.

Autonomy

3 settings to suit your needs: power, eco, and flash.

Versatility

IPX4: Withstands splashes and heavy rain.

This front and rear bike light set was developed for fast-travel visibility and is visible from 360°.

Power Capacity

Brightness (Lumens)

Rechargeable

Lighting Type

Type Light

type of rear visibility

Autonomy (H)

Hook Type

Power Type

Range (m)

Choose the most suitable of the 3 settings for your needs—at the front or back! 

At the front: 
- Power mode: 40 lux, 300 lumens, for 3 hours
- Eco mode: 15 lux, 140 lumens, up to 5 hours
- Flash mode: 40 lux, 300 lumens, for 11 hours

At the back: 
- Power mode: 50 lux, 25 lumens for 2 hours 20 min
- Eco mode: 35 lux, 13 lumens for 4.5 hours
- Eco mode: 50 lux, 25 lumens for 5 hours 20 minutes

Sportswear & Footwear/

Accessories/

Sunglasses/

Women's Sports Sunglasses/

no brand

Sunglasses, Perf 100 Light