Scored 2.27 in a standardized test.
Seams on the inside.

Durability

Lasting air retention

Scored 5.96 in a standardized test.
Classic 32 panels.

Stable flight

Your ball complies with FIFA requirements in terms of bounce.

Bounce

The FIFA-approved Club Hybrid ball pairs comfort with durability. 

Condition

Intensity

Skill Level

Type of Rebound

Diameter (cm)

Stitching Type

Practice Conditions

Type of Finish

bladder type

number of panels

Certification

Playing Surface

Ball Size

Main Material

This hybrid ball was created after observing soccer players in action.
This ball's hybrid design combines the comfort of a machine-stitched ball with the durability of a hand-sewn one (the seams are on the inside).We've also used a special bladder (2 km [1 mi] of thread is wrapped around it) to ensure lasting inflation and better sphericity.

The story behind this ball

We have developed a tool that allows us to measure the our balls' durability.
We identify and evaluate all possible defects through a series of practical lab tests.
We use these tests to compare our soccer balls' overall durability with that of others available on the market.Our aim is to offer the most durable products on the market.

Prioritizing durability

This ball complies with official FIFA standards and weighs between 410 g and 450 g [14 1/2 and 16 oz.] (size 5).
FIFA Basic-approved.

Too light? Too heavy? The weight is standardized.

This ball measures between 68.0 cm and 70.0 cm (27 and 27 1/2") and complies with official FIFA standards.
FIFA Basic approved.

How big is it? What’s the circumference?

Here’s how we test sphericity:
Average measured variation: 1.8% max (FIFA Basic standard).
We measure the ball’s sphericity at 4,500 different points and then examine any differences. 
If the discrepancy is greater than 1.8% (FIFA Basic standard), our engineers work on improving the sphericity to ensure a consistent bounce.

A round ball?

Here’s how we test pressure loss: We inflate the ball to the recommended pressure (11.6 psi).
The ball cannot lose more than 15% of its pressure over 72 hours, meaning a maximum pressure loss of 1.5 psi (FIFA Basic standard). The pressure after 72 hours must be approximately 10.1 psi.
This also means that it’s quite normal for a ball to lose pressure after a few days.

Maximum pressure loss test: here’s what we do.

Here’s how we test water absorption:
To simulate rainy playing conditions in a lab, we put the ball in 2 cm (1") of water on a pivoting support and subject it to 250 compressions.
At the end of testing, the ball must have absorbed no more than 15% of its weight (FIFA Basic certification).

We’ve also tested how much water the ball absorbs.

Here’s the bounce test: 
The ball is dropped onto a steel plate 10 times from a height of 2 metres (2 yd).
 The bounce height must be between 125 cm and 155 cm (49" and 61"), with a maximum difference of 10 cm (4") between its highest and lowest bounce.

It’s all about the bounce

The most rigorous test we put this ball through is the shooting machine test.
The ball must resist 2,500 shoots against a concrete slope at 50 km/h (30 mi/h) at a distance of 2.5 m (3 yd).
At the end of the test, we check:
- The ball’s general condition: Stitching must remain intact
- Circumference: Must not have varied by more than 1.5 cm (3/5").
- Sphericity: Must not have varied by more than 1.8%
Pressure: Pressure loss must not exceed 12.5%

Not even a scratch!

Your feedback is important to us and helps us improve our products.A huge thank you for sharing your feedback.

What do you think?

Our soccer ball range is co-designed with 244 European soccer players. This community helped us to pick the colours and names so that it's easy to see the difference between the models.

These balls are FIFA approved and designed to meet different levels of technical requirement (Practice, Games, Pro Ball).

Their increased durability and better feel bring them ever closer to the official ball that graces the playing fields of the Ligue 1 Uber Eats and Ligue 2 BKT.

The story behind our range of soccer balls

Soccer Balls

Warmth

Medium thickness: ideal for narrow to medium ski boots.

Precision

Synthetic thread designed to wick away moisture from foot, towards the outside.

Moisture management

Fully elastic sock stays in place on the foot.

Stability

With the best technical features/warmth of the range, these socks are essential for skiers and snowboarders. 

Maximum washing temperature 30°C. Normal cycle.

Frequency

Season

height of the sock

thickness of the sock

silicone

moisture management

anti-slip

shoes with left or right mark

Style

Elastic

Packaging

Our socks cover 3 to 4 sizes. Thanks to the elastane, they can be adjusted to fit your feet and they stay in place.
We recommend choosing a slightly smaller size than too big.

How do you choose the right sock size?

Ski Socks

270 g/m² density fleece fabric for optimal warmth

Breathable fabric for better moisture wicking, RET = 3

Breathability

2 zippered hand pockets and one secure chest pocket

Pockets

Weight

Stand up to the cold with confidence thanks to our full-zip fleece jacket with insulating material and a high collar to keep you warm. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Collar Type

Number of Pockets

Pocket

Hood

Zipper Type

The fleece component traps air thanks to its unique texture and scratching. It provides exceptional insulation to keep you warm. Tested in the laboratory, this fleece guarantees optimal comfort between 7 and 10°C, without an additional jacket.

Air to insulate from the cold

The fleece’s fabric has been thermally tested on a mannequin in a climate chamber. These tests imitate mountain conditions to help us verify our design choices.

How is warmth measured?

Our fleece jacket’s breathable fabric keeps you comfortable even when highly active. The jacket’s moisture-wicking properties will keep you dry and comfortable on your hikes.

A breathable fleece: why?

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower the RET, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (not very breathable).
This fleece jacket has a RET of 3.

What is the RET index?

Complete freedom of movement is essential for comfortable hiking. That’s why we’ve added elastane to this fleece. You can enjoy unrivalled freedom of movement to make the most of your hikes.

Why elastane?

This ultra-practical jacket has two zippered hand pockets and one zippered chest pocket.This allows you to store your belongings safely.It is also ultra lightweight.Ideal for storing in your bag.

A lightweight, practical fleece

Our products undergo rigorous testing to guarantee their quality. We check their resistance to pilling, discolouration and repeated washing. Abrasion resistance is measured using the Martindale test, which subjects a fabric sample to repeated rubbing.

Resistance testing

Men's Hiking Shirts

Soft and warm knit for comfortable outings.

Its practical size means you can slip it into a pocket or backpack.

Compact design

The Rider hat won’t let you down. Its understated but very current style will be perfect for everyday winter wear. 

Maximum wash temperature of 30°C. Very delicate cycle.

reflective

Weather Conditions

Reversible

Waterproof

Type of Beanie

moulded swimcap

How to wear this hat

The hat fits head circumferences between 56 cm and 59 cm.

A model for women and men

Ski Hats & Beanies

60 g/sqm wadding, brushed polyester lining, comfort temperature down to -4°C.

5,000 mm membrane (Schmerber) and partially taped seams.

Semi-elastic waist, belt loops, strap loops.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Gaiters at the bottom of the pants prevent snow from getting in.

Limits snow entering

The perfect ally for your first rides! Waterproof and comfortable, they will keep you warm. The gaiters go over your boots.

type of lining

reinforced area

belt height

Type of Brushing Boots

Place of Practice

modular

Windproof

RECCO system

type of waterproofing

Type of Length

Type of Bell

Schmerber

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of the water column (measured in mm) that the fabric can withstand (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

Ski Pants & Bibs

100% anti-UV. Brown S3 lens for good vision in sunny and overcast conditions.

Sun protection

Essential anti-fogging, double screen with anti-fogging treatment.

Anti-fogging

Wraparound lens with Essential field of vision.

Field of vision

User comfort

Compatibility

From the entry-level range, we equip our ski goggles with dual lenses to reduce fogging and guarantee good visibility in good weather.

Ventilation Zippers

Strap Type

Technical Lens

Compatible with prescription glasses

Field of Vision

glass composition

fogging treatment

Lens Colours

Glass Category

anti-uv

With Case

Tightening Type

Diving Mask Type

All our goggles are 100% anti-UV certified by the EN-174 standard. Goggles, which perfectly enclose the eyes and prevent any direct or reflected UV light from entering, provide the best protection.

UV Protection

S3 Sun is a dark lens that protects you from bright sunlight. 
We have selected a brown tint that offers good visibility in shaded areas or in the late afternoon when the sun is less bright.
Lenses are not scratch-resistant.

Sun S3 lens

Essential anti-fogging is a dual lens with treatment on the inside of the inner lens.
To ensure effective ventilation, do not block the vent with a neck warmer, for example.
Do not rub inner surface of lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible. Dry goggles thoroughly every night.

Essential anti-fogging system

Dual screen reduces condensation. The air trapped between the lenses creates a layer of thermal insulation. The thermal shock between the inside and the outside of the goggles is lower, limiting fogging on the goggles’ inner lens. The inner lens also has an anti-fog treatment.

Double lens

Wraparound dual lens, made of polycarbonate for the outer lens and cellulose polycarbonate for the inner lens, both cut to fit the shape of the goggles.

Wraparound lens

There is a vertical and a horizontal visual field. The G 100 has an Essential field of vision, providing good, safe, visibility on the sides.

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

The padded sides and the shape of the goggle skirt leave space for the stems of eyeglasses. G 100 ski goggles in size L can be worn with glasses (maximum width of 135 mm).

Compatibility with prescription glasses

40 mm-high polyamide, polyester, and rubber strap.

Strap

The EN -174 standard is a European standard applied to goggles used for eye protection when downhill skiing or during similar activities, such as snowboarding. The ANSI standard, the American standard, has more stringent requirements for resistance to shocks and impact.
These ski goggles pass both these standards.

CE - EN -174 and ANSI Standard

Moisture causes fogging. To prevent fogging, keep the foam dry by not placing your goggles on your head or helmet. Falling face down in the snow can also cause your goggles to fog up. Dry your ski goggles completely overnight to get rid of all traces of humidity so you can hit the slopes with bone-dry goggles the next day.

To avoid fogging

The size of the goggles is based on head size
Up to 55 cm, choose size S (formerly S/M); from 56 cm up, choose size L (formerly L/XL)

Two sizes

Kids' Ski & Snowboard Goggles

Perfect as a hat, headband, or neck warmer.

Flexibility

The fabric wicks away moisture to keep you dry.

Wear over the ears or around the neck to keep warm.

Multi-use neckband designed for any adventure!

Sports/

Team Sports/

Basketball Gear/

Basketball Training Equipment/

decathlon

Level 2 Knee Support, Right or Left